DEVELOPMENT AND SELECTION of desiccant dehumidifier

1
(No Transcript)
2
UAB Desiccant Technologies Group
Verkiu str. 5, LT-08212 Vilnius, Lithuania
DESTECH.EU
3
All desiccant dehumidifiers are composed and
created utilizing modern software. The complete
3D model of the dehumidifier which incorporates
all parts is the after effect of careful work of
outline designers. Making such 3D model permits
to assess and to improve the dehumidifier
preceding its generation and to prohibit all
issues that may emerge later on amid the get
together of the hardware.
4
Metal processing for desiccant dehumidifier
We use only corrosion resistant metals for
manufacturing of the desiccant dehumidifiers stai
nless steel sheet with thickness of 1.0 mm, 1.5
mm, 2.0 mm AluZinc steel sheet with thickness of
1.0 mm, 1.5 mm.
5
Laser Cutting
The sheet steel for the case of dehumidifiers is
cut on a German laser machine. It allows to cut
the sheet of sizes up to 1500 3000 mm.
6
cutting and final after complete cooling - high
accuracy of cutting
7
- high productivity of the process, combined with
the high quality of the cut surfaces
8
Visit The Best Desiccant Dehumidifier
Manufacturing Company in Europe
UAB Desiccant Technologies Group
Verkiu str. 5, LT-08212 Vilnius, Lithuania
E-mail destech_at_destech.eu ph. 370 610 65665