642-732 IBM Preparation Materials

1
Cisco 642-732 Real Exam
http//www.pass4sures.co/642-732.html
2
Exam About
The CUWSS Conducting Cisco Unified Wireless Site
Survey exam is the exam associated with the CCNP
Wireless certification. This exam assesses a
candidate's capability to plan and conduct a
wireless site survey, to design the RF network
and to conduct a post installation assessment to
ensure compliancy. Candidates can prepare for
this exam by taking the CUWSS Conducting Cisco
Unified Wireless Site Survey course.
http//www.pass4sures.co/642-732.html
3
EXAM BASICS
The Conducting Cisco Unified Wireless Site Survey
(CUWSS) version 2.0 642-732 exam is a 75-minute
test with 45-65 questions that are associated
with the Cisco CCNP Wireless certification. This
exam assesses a candidate's ability to plan and
conduct a wireless site survey, design the RF
network, and conduct a post installation
assessment to ensure compliance. The exam is
closed book and no outside reference materials
are allowed.
http//www.pass4sures.co/642-732.html
4
Exam Topics
The following topics are general guidelines for
the content likely to be included on the exam.
However, other related topics may also appear on
any specific delivery of the exam. In order to
better reflect the contents of the exam and for
clarity purposes, the guidelines below may change
at any time without notice. The exam is closed
book and no outside reference materials are
allowed.
http//www.pass4sures.co/642-732.html
5
Study Material
Welcome to the Study/Learn tabs for the 640-732
CUWSS Exam page. This page is designed to help
you quickly find what you are looking for by
organizing the content according to the exam
topics. These resources are meant to supplement
your learning experience and exam preparation.
They are NOT designed to serve as a complete
self-study program, but intended only as a
suggested starting point.
http//www.pass4sures.co/642-732.html
6
PREPPING FOR THE EXAM
642-732 Online Exam Simulation developed for
professionals, by professionals. 642-732 tests
containing questions that cover all sides of
tested subjects that help our members to be
prepared and keep high level of professionalism.
The main purpose of 642-732 exam is to provide
high quality test that can secure and verify
knowledge, give overview of question types and
complexity that can be represented on real exam
certification. To held our members in same
environmental conditions as on real certification
exam 642-732 Online Test Simulation provides
http//www.pass4sures.co/642-732.html
7
INTERNATIONAL STUDY GUIDE
Pass4sure Conducting Cisco Unified Wireless Site
Survey V2 products provide you an easiest way to
grasp syllabus content and perform excellently in
the real exam scenario. Pass4sures Cisco
642-732 products are in line with the real exam
requirements, hence serve you the best to answer
all exam questions and ensure outstanding
percentage. Designed into QAs pattern,
Pass4sures brain dumps, Study Guides, practice
Tests, Exam Engine best suit your needs in
affordable prices.
http//www.pass4sures.co/642-732.html
8
PASS4SURE CCP EXAM FEATURES
642-732 Questions Based on Real Exams
Scenarios Experts Verified Questions and
Answers Easy to use Testing Engine print PDF
format Download Free 642-732 Demo (Try before
Buy) According to recommended syllabus and
Objectives 100 Pass Guaranteed 90 days free
updates (testing engine)
http//www.pass4sures.co/642-732.html
9
642-732 Real Exam Questions Answer
Question No 1
Refer to the exhibit. Which type of interference
would the engineer detect on the Cisco Spectrum
Expert?
A. Bluetooth B. Wi-Max C. DECT phone D.
microwave E. analog camera
Answer D
http//www.pass4sures.co/642-732.html
10
642-732 Real Exam Questions Answer
Question No 2
An engineer is configuring an AP for a site
survey. How should the transmit power
be configured? A. Set to maximum power. B. Set
to one level below full power. C. Enable DTPC. D.
Set to one level above the lowest power level.
Answer B
http//www.pass4sures.co/642-732.html
11
642-732 Real Exam Questions Answer
Question No 3
A Cisco engineer is troubleshooting a Cisco 1250
series 802.11n access point with a maximum
throughput on 2.4 GHz that is limited to 72 Mbps.
Why might the AP be operating in a limited
capacity? A. the switch providing PoE supports
802.3af B. the switch providing PoE supports
802.3at C. the 2.4 GHz bandwidth is 20 MHz
wide D. the 2.4 GHz is 40 MHz wide
Answer A
http//www.pass4sures.co/642-732.html
12
642-732 Real Exam Questions Answer
Question No 4
The customer has an existing 802.11b/g network
with Cisco 2500 controllers. The customer would
like to migrate to an 802.11a/b/g/n WLAN. Which
network infrastructure issue might impact client
performance in this proposed controller-based
solution? A. The additional application load
placed on servers by 802.11n clients. B. A
bottleneck may occur if the access switch port to
the AP only supports 100 Mb/s full duplex. C. The
additional load placed on a RADIUS server by
802.1X authentication traffic on the first work
day of each week. D. The added delay WDS imposes
on the client when they roam from one AP to
another.
Answer B
http//www.pass4sures.co/642-732.html
13
642-732 Real Exam Questions Answer
Question No 5
You have been contacted by a medium sized medical
center to do a site survey of their existing
WLAN. The current network is set up with multiple
SSIDs/VLANs to separate voice and data and the
networks functioning properly. The medical center
would like to add Vocera voice badges to the
existing VoWLAN. Which two issues need to be
considered during the site survey? (Choose
two.) A. The additional voice endpoints may
increase additional load, which may increase
delay in the WLAN and cause voice quality to
degrade. B. There will not be any issues due to
adding the Vocera voice badges because they
are point-to-point devices and do not require the
infrastructure to communicate. C. Verify the WLAN
is multicast enabled for Vocera voice badges. D.
To make these devices as efficient as possible,
the Vocera voice badges should be placed on their
own unicast SSID/VLAN. E. Verify the WLAN that is
being used by the Vocera voice badges is
configured in the WLC to use the Gold QoS value.
Answer A,C
http//www.pass4sures.co/642-732.html
14
642-732 Real Exam Questions Answer
Question No 6
When designing and deploying an outdoor mesh
network, what is the appropriate RF cell
overlap? A. 10 percent B. 15 percent C. 20
percent D. 25 percent E. Application dependent
Answer E
http//www.pass4sures.co/642-732.html
15
642-732 Real Exam Questions Answer
Question No 7
Which option lists the non-overlapping channels
in the ETSI domain? A. 1, 6, and 11 B. 1, 5, 9,
and 13 C. 1, 5, 9, 13, and 14 D. 1, 5, and 9 E.
1, 6, 11, and 14
Answer A
http//www.pass4sures.co/642-732.html
16
642-732 Real Exam Questions Answer
Question No 8
When using WCS 7.0 to calibrate a floor in a
facility, which two factors are common to
the point and linear calibration methods? (Choose
two.) A. You must go through each collection
point at a speed that isn't too fast to collect
too much information nor too slow which limits
the amount of information collected. B. You must
sample both the 802.11a/n and the 802.11b/g/n
network separately. C. If one collection point in
the linear or point collection method is missed,
you have to start at the beginning again. D.
Rotating the client is only required during the
point collection process because the
linear method is a slowly moving process. E. You
will only need to combine the linear and point
collection methods in special spaces like
hallways.
Answer A,B
http//www.pass4sures.co/642-732.html
17
642-732 Real Exam Questions Answer
Question No 9
Which piece of information gathered during a WLAN
site survey should be included in the customer
report? A. Analysis of server location and
applications supported. B. Analysis of
fiber-optic backbone infrastructure. C. Output
from Cisco WCS Location Quality Inspector. D.
Output from Cisco WCS VoWLAN Voice Readiness
Tool. E. Output from Cisco WCS Planning Mode Tool.
Answer E
http//www.pass4sures.co/642-732.html
18
642-732 Real Exam Questions Answer
Question No 10
Which two pieces of physical infrastructure
information should be included in
the installation report presented to the
customer? (Choose two.) A. A list of router and
switch models, serial numbers and locations. B.
The total square footage of the customer's
facility. C. An analysis of the facility exterior
wall and roof construction materials. D. The
cable scan results for the entire customer
facility. E. An installation inventory of all
controllers and APs in the WLAN coverage area.
Answer D,E
http//www.pass4sures.co/642-732.html
19
BECOME CERTIFIED FROM PASS4SURES.CO
http//www.pass4sures.co/642-732.html