Myths And Facts Of Aluminum Connecting Rod

1
Myths And Facts Of Aluminum Connecting Rod
2
1
It is said that aluminum rods are stretched.
Well, it is a myth. Truth is that it is not
stretched but it grows in the process where it is
heated and then once it is cooled back to room
temperature. They are deformed or fractured in
the process where they can become longer either
from an engine failure or past their end of life
cycle.
3
2
These are not recommended for circle track
engines. It is also a myth as there are ample
amount of people who uses and succeeds in using
rods made of aluminum for circle track engines.
4
3
Aluminum connecting rods are breaks or any other
rods break as well. It is true. Since each of the
material have runs in a fixed limit, so are the
rod. If you continuously exceed the horsepower
where it is designed for the life cycle of the
aluminum, in that case surely the rod will break.
5
4
Aluminum Rod is only used for drag racing. No, it
is a myth. It might have run for years and age
for some of the drag racing applications but it
has also failed for many. They can be used for
street cars and diesel engines as well for the
material used to engineer this excellent rod.
6
5
Aluminums are not for diesel engines is so much
of myth. It goes the way around with the drag
racing, it really depends where some can last and
some cannot. There are diesel engines where rods
lend them for longer service life with excellent
results.
7
6
Trust is there is no denial that aluminum rod
tends to carry slightly a short life expectancy
than steel but it is great for the applications
for chucking a set of rods in the bracket racing
engine every few passes like a nitro car.
8
These rods are majorly used for racing purposes
and despite all the myths, aluminum rods are
selected for a vast number of applications.
9
Contact Us Address DaQiuzhuang
Industry,Park,Tianjin,China Email
sinoeast3_at_163.com Skype paulpaul120481 MOB 86
18622088833 Sino Aluminum Sheet Suppliers
10
Thanks For Watching