Step by step directions for burning a stump

1
Ways To Make Your Trees More Stable
www.treezy.com.au
2
Tree trimming Brisbane southside
Attach the spade bit and the extender to your
drill. Drill a hole from the top down into the
center of the stump with your drill at a
30-degree angle. The hole should be about eight
to 10 inches deep.
3
Brisbane southside tree lopping
Clean all of the debris out of the hole. Continue
boring holes in the stump, leaving about one inch
of space between each hole.
4
Brisbane southside tree services
Use the plastic scoop or trowel to scoop
potassium nitrate into each hole.
5
Certified arborist Brisbane Southside
Pour hot water into each hole. You can either dip
a cup with a spout into the bucket or insert a
funnel into each hole and pour the water directly
from the bucket.
6
Emergency Tree Removal Brisbane Southside
Continue pouring water into the holes until all
of the potassium nitrate has dissolved. The hot
water will help to distribute the substance
through the stump.
7
Tree Removal Brisbane Southside
Place the scrap wood on top of the stump.
Alternatively, you can construct a tepee-like
shape with the wood, placing one end on the
ground and bringing the ends together above the
stump in a cone shape.
8
Emergency Tree Removal Brisbane South
Light the scrap wood and wait for the stump to
ignite. Allow the stump to smolder until all of
the wood has turned to ash.
9
Emergency Tree Removal Brisbane
Use your shovel to break up any large roots or
stump pieces that are left over. Bring in soil to
fill the hole as needed.
10
Tree Removal Brisbane
Step-by-Step Directions for Burning a Stump By
Treezy .  Treezy has become the
go-to professional tree services company for
residents of Brisbanes Southside expert in Tree
Removal , Stump Grinding, Tree lopping, Mulching
Tree Wood chipping and Tree Cutting Services.
Call now 07 3999 9851 http//www.treezy.com.au/
11
Thank You!
www.treezy.com.au