Title: Fire Restoration In Toronto
1Fire Restoration In Toronto
2(No Transcript)
3It always poses as a question, how we do it? The
answer is not simple since the work is complex,
but we sure can explain the steps which we go
through during our fire restoration damages in
Toronto. Following are some of the basic steps
for a typical fire damage response.
4(No Transcript)
5(No Transcript)
6Contacting in Emergency
At Diligent Construction, we offer a 24/7 around
the clock service and will be available at your
disposal at any time you need us. However, when
you contact for fire damages restoration in
Toronto to our company, our customer
representative will ask a series of short
questions to get the details about your fire
damage situation. This will help us deploy the
required equipment and assistance needed at the
site.
7(No Transcript)
8(No Transcript)
9Inspection and Assessment on Site
The primary step is to inspect the whole property
and analyze the damage the fire has done. Clear
assessment is necessary for future decisions. It
is the visible detection of defects and faults
that will determine further developments in the
process of restoration.
10(No Transcript)
11(No Transcript)
12Board up and roof tarp service
The fire can damage nearby windows, doors and any
other entrances which will develop soot and
smoke. It also weakens the structural entirely
which will need assistance hence board up, and
roof tarp is the service we use at that moment.
13(No Transcript)
14(No Transcript)
15Cleaning and removal of water
After the fire is contained by a sprinkling of
water, the area surely is flooded with water
until the fire is extinguished. Hence there is a
dire need of removal of excess water and drying
up the property for the restoration work to take
place. After that dehumidifiers and air movers
are used to remove the remaining water vapors
still trapped inside.
16(No Transcript)
17(No Transcript)
18For more update , visit us
https//diligentconstruction.ca