Title: smiths299 (13)
1 Canon Printer Error 5b00
https//www.canonprintersupport247.com/blog/fix-ca
non-printer-error-code-5b00/
2How to Fix Canon printer Error 5b00?
Users usually face Canon Printer Error 5b00. The
error occurs when the ink system fails to absorb
the ink. The ink system in canon printer
continuously fills the ink inside the
printer. At times when it fails to absorb you
get to canon error 5b00 messages. This canon
error can be seen in model no.s Canon mp280,
Canon mx410, Canon g2000, Canon mp287. The happy
news is the same troubleshooting tricks can
resolve the error 5b00 in all these canon
printers. Fixing Canon Error code 5b00 Two
methods can fix this error for you. The first
method is widely used and mostly fixes the error.
In case it doesnt turn out good for you you can
always opt to follow the second method as well.
Let us check these both in detail
3Method 1 Resetting Waste Ink System
Count Resetting the waste ink absorber on a Canon
mp280, Canon mx410, Canon g2000, Canon mp287 can
resolve error code 5b00. Follow the below-given
steps in a specified order to fix the error code
5b00. Step 1 Turn Off your Printer entirely
while removing the power cable. Step 2 Long
press and keep pressing the Resume button on
your Canon printer. Step 3 Simultaneously press
and hold the Power button of your printer. The
Green LED will lit up. At the same time as it is
held down, hold down the Power button. Then the
green led light should come on. Step 4 Release
the Resume Button, when the green light shows
up, now release the Resume button. Step5 Keep
holding the power button and again press the
Resume button twice. The LED light should go
first amber and then green again.
4Step 6 Release the Power button now. Step 7
Now read carefully and press as
mentioned Resume button four times Power
button once this will confirm your action of
Resetting Ink counter absorber.) Step 8 Now,
turn on your printer. Doing these steps will
reset the waste ink counter system, and your
printer can get back to work. The canon printer
error 5b00 will go away from your screen. In
case this method doesnt resolve the issue for
you, there is another trick worth trying. Read
the next section to learn what it is. Method 2
Clean The Waste Ink Foam Manually Yes, you can
manually clean the ink foam. Doing this will also
let your printer work again while removing the
canon 5b00 error from many canon printer models.
Following check out, how to do this Step1 Keep
your printer turn on and open the front cover of
it.
5Step 2 Look behind the cartridges there will be
a row of white rollers. Step 3 Take out all the
cartridges one by one to reach the rollers.
Further, if you look closely, there is a foam pad
near the rollers. Step 4 Clean the foam pad
with the help of a paper towel. Keep dabbing
until you collect all ink waste on paper towel
pieces. Step5 Replace the cartridges back in
their place. Make sure you seat them well. Close
the printer cover. Step6 Now, restart your
printer by powering it Off and On again. This
method is not known to many. Usually, people
suggest to work out with the waste counter reset
method. This also resolves the canon error 5b00
successfully, so why not give it a
try? Unfortunately, if none of this method
worked for you and Canon printer error, 5b00
still refuses to go, even then you have hope. In
such a scenario contact the canon printer support
helpdesk.
6(No Transcript)