Using Silicone Specialist Tools While polishing Your Silicon Wire Products

1
Using Silicone Specialist Tools While polishing
Your Silicon Wire Products

• Silicon Specialist

2

• Silicon Specialist, based in San Jose,
  California, is a leading silicon material
  processing company that specializes in wafer
  polishing and deposition services. The Company
  offers top quality, affordable fabrication
  services in a variety of areas including solar
  panels, integrated circuit boards, microchips,
  wireless communications devices, medical
  equipment, and various other devices. The company
  was started in 1976 by Frank Vander slot. Since
  its founding, the Company has grown into a
  world-class supplier of wafer polishing products
  to a wide range of customers, both commercial and
  consumer. To continue building on the Company's
  reputation as one of the world's premier silicon
  manufacturers, the Company has signed strategic
  agreements with several major global fabricators.
• If you are looking for a manufacturer that
  specializes in cutting edge technology for the
  electronic and electrical industries, it would be
  wise to speak with a company that offers high
  quality wafer polishing and deposition services.
  When sourcing silicon for your next project, it
  would be important to find a provider that can
  provide the best quality products to meet both
  your needs and budget. Most silicon specialists
  have a wide range of tools and equipment for
  making the wafers that will be used in the
  manufacturing process. These tools include a
  variety of diamond particles, graphite, glass
  fibers, as well as other silicon materials.

3

• The goal of the diamond coating and lapping
  process is to create a surface that is smooth and
  free of defects and burrs, which makes it ideal
  for use in applications where accuracy is
  required. In addition to accuracy, the final
  product must also be free of cost. Silicon
  Manufacturing Companies CA has a wide range of
  equipment to produce this high quality product.
  Some of the most commonly used equipment includes
  diamond blade machines, vibratory machinery, and
  vibratory sanding machines as well as an
  assortment of lapping and buffing machines.
• One of the most important aspects of the entire
  process would be the preparation of the wafer.
  This would include a thorough cleaning process as
  well as the application of several coats of
  silicon lubricant and a final polish. During the
  cleaning process, it is critical to use only the
  highest quality of equipment, which would make
  sure that the surface of the wafer is protected
  from contamination. After the cleaning process
  has been completed, the wafer is put in a heat
  bath. The purpose of this heat bath is to remove
  any residual contaminants that were present
  during the cleaning process and the lamination
  process.

4

• When the wafer is placed in the heat bath, it
  goes through several heating processes to
  properly fuse the silicon wafers with each other.
  This would ensure that the lamination process
  occurs properly and to a standard that the
  industry standards. The lamination process also
  ensures the smooth and even lamination of the
  wafer. After the entire process is completed, the
  wafer is placed in an oven at high temperature.
  During this time, the silicon wafers are exposed
  to several cycles of direct current in order to
  fuse them together. This ensures that the wafers
  are always protected and that they are always
  ready for application.
• The final step in the process is a single side
  polishing. During the single side polishing
  process, the thin film of the silicon wafer is
  placed on one side of the plain steel base
  material. Then, the polishing machine will be run
  to the other side of the silicon wafer to polish
  away any excess dirt or dust. Single sided
  polishing is considered by many process engineers
  to be the most effective way of ensuring that the
  thin film of silicon will be protected and will
  be polished in the exact direction as the
  incoming light from the light source.

5

• In addition to these processes, many process
  engineers would also like to use a few types of
  tools during the polishing process. These tools
  can help to make the surface of the wafers
  smoother and will make the final product look
  more attractive. One type of tool that many
  silicon specialists would welcome to use is
  called an Ionization Stamp. This tool will
  effectively emit ionize elements onto the surface
  of the wafers. These ions will react with the
  particles that have been attached to the wafers,
  thus polishing the thin film of wafers.
• One thing that you should remember about using
  lapping machines while you are polishing is that
  there will be times when the lapping machine will
  not work perfectly. You will sometimes see some
  areas of the wafer that are not polished to
  perfection. If you are working on a very small
  piece, then this will not matter to you as long
  as you are working with a decent lapping machine.
  It is important that you do not ignore areas of
  the wafer where dust is stuck to it as these
  areas will need to be flattened out so that you
  can apply the finishing coat. The final tip that
  you would want to get from this is to always
  remember that proper ventilation will help you
  polish your quality Si Wafers CA better.

6
THANK YOU