Photolithography Mask Printing

1
(No Transcript)
2
Lithography Resist Adhesion
The Lithography resist adhesion would then be
moistened, and the carved regions would hold
water, allowing an oil-based ink to be added. The
etched portions that retain water would reject
the oil-based ink, resulting in the ink clinging
exclusively to the sections with the oil-based
material drawn on.
3
Electroplating Process of Nickel Sulfamate
The sole distinction between original stone and
original plate lithography is the medium
utilized. The electroplating process of nickel
sulfamate uses unique plate printing to sketch on
aluminum rather than limestone. Because the
materials are not as heavy, this procedure is
usually simpler for artists.
4
(No Transcript)
5
(No Transcript)
6
(No Transcript)
7
CONTACT US
Contact Person Dis Cheminc Phone 1 (814)
772-6603 Address  17295 Boot Jack Rd, Suite A
PO Box 267 Ridgway, PA 15853 USA Website- https
//discheminc.com/
8
THANK YOU