Title: Sphygmomanometer – How to Use
1Sphygmomanometer How to Use
2What is Blood Pressure?
Blood pressure is the amount of force your blood
uses to get through your arteries. When your
heart pumps, it uses force to push oxygen-rich
blood out to your arteries. They bring it to your
bodys cells and tissues. If your blood pressure
is too high, it can cause health issues. The only
way to know your blood pressure is to measure it.
3How to measure Blood pressure with
Sphygmomanometer?
It is an instrument for measuring blood pressure,
typically consisting of an inflatable rubber cuff
which is applied to the arm and connected to a
column of mercury next to a graduated scale,
enabling the determination of systolic and
diastolic blood pressure by increasing and
gradually releasing the pressure in the cuff.
4How To Use a Sphygmomanometer
Sphygmomanometer is an instrument for measuring
blood pressure, typically consisting of an
inflatable rubber cuff which is applied to the
arm and connected to a column of mercury next to
a graduated scale, enabling the determination of
systolic and diastolic blood pressure by
increasing and gradually releasing the pressure
in the cuff.
5How To Use a Sphygmomanometer
- Know your basic knowledge of blood pressure
readings. Blood pressure readings are expressed
as systolic over diastolic pressure. The normal
blood pressure of an average healthy adult is
120/80. - Use proper-sized cuffs. Cuffs that are too loose
or too tight may - influence the accuracy of blood pressure
measurements. The cuff should be 80 of the
circumference of the upper arm. Be sure not to
place the cuff on a clothed arm. - Properly place the cuff on the arm. While
wrapping the cuff - around the upper arm, keep the lower edge
of the cuff one inch above the antecubital
fossa, the region of the arm in front of the
elbow.
6How To Use a Sphygmomanometer
- Position the stethoscope. Lightly press the
stethoscope bell over - the brachial artery, just below the lower
edge of the cuff. - Inflate the cuff. Using the bulb, inflate the
cuff to 180 mmHg, - then release using the valve at a moderate
rate of about 3 mm per second. - Listen and observe. While examining the dial or
mercury gauge, - listen for a knocking sound with the
stethoscope. The first knocking sound represents
the systolic blood pressure of the patient. The
point when the sound disappears meanwhile
signifies the diastolic pressure. - .
7SantaMedical Offers the Best Sphygmomanometer
- FDA CLEARED - Santa medical Aneroid
Sphygmomanometer is FDA Cleared. - QUALITY TESTED Stress tested thousands of
times - QUICK AND EASY READINGS Large high Contrast
dial to for easy and quick readings - DEHP Free, Large Air-release valve, It does not
come with D-Ring, makes it easier to put it on
the yourself as wells as others. - PRECISE - A precise, certified 300 mmHg manometer
attains the accuracy of - 3 mmHg.