How To Clean Brick And Mortar Walls?

1
How To Clean Brick And Mortar Walls?
2

• Bricks have been a favored option for many years
  due to its luxurious, enduring appearance.
  However, throughout time, dirt, filth, and moss
  can lead to staining and make the exterior of
  your house unattractive. Fortunately, a power
  washer can revive your bricks to its previous
  magnificence. By adhering to the following
  guidelines, you can have that aged brick
  appearing fresh once more. This piece will guide
  you through the necessary measures for an
  effective brick powerwashing in order to maintain
  its new appearance!

3

• Pre-cleaning processes
• Show your walls bricks affection and attention.
  The primary factor to contemplate before you
  endeavor to cleanse the walls is the working
  force (PSI) you intend to apply. Vintage bricks
  are not as sturdy as contemporary building
  materials, and utilizing excessively high force
  will cause fractures in the bricks or grout,
  which may result in additional grave
  complications, such as interior water harm and a
  challenging task to repair the fractures in your
  walls.

4

• Using a power sprayer on bricks can be fulfilling
  if executed cautiously, and it is advised to use
  only 800 pounds per square inch or less, which is
  sufficient pressure to effectively cleanse your
  bricks without harming your outer walls. Avoid
  lingering or halting in one area while cleaning,
  as extended pressure in a particular spot is
  typically the root cause of the damage.
• 1. Patch the cracks
• A week prior to cleaning, the initial step you
  will have to take is mend any impaired mortar
  connections and allow it to dry. This will hinder
  water from infiltrating from the backside of the
  bricks and generating mold within the walls.

5

• We understand that this may pose a challenge,
  particularly when your focus is on power washing,
  but it is exceedingly crucial to uphold the
  structural soundness of the elements. Adhere to
  the guidelines provided on the package to
  properly administer the mortar onto your bricks.

6

• 2. Protect and cover the outlets and windows
• To effectively safeguard your residence, it is
  crucial to enclose all outdoor electrical
  sockets, encompassing any visible electrical
  interfaces like those for the AC system, a
  switchboard for a backup generator, and other
  electrical device that might come into contact
  with water. Employing plastic bags and wraps
  along with tape or elastic bands should suffice
  for this task. Furthermore, ensure that all
  windows, molding, entryways, and other vulnerable
  exterior entrances in the areas where you intend
  to cleanse your bricks are covered. You will
  appreciate this precautionary measure if you
  accidentally pass over a window during the
  cleaning process.

7

• 3. Wet the brick
• Completely soak the exterior of your home. It is
  crucial to complete this stage before using any
  cleaning agents as it will ready the masonry for
  the cleaning process.
• 4. Brush off tough stains
• For highly soiled and discolored brick, employ a
  rotating scrubbing brush. This is a gentler
  method compared to utilizing water under intense
  force. It will aid in penetrating the detergent
  and disintegrating stubborn blemishes.

8

• Oil, grass marks encircling the base where
  lawnmower marks, moss, and tree sap prove
  challenging to eliminate. Gently scrubbing these
  types of adhered messes with a superior brick and
  mortar cleanser can assist in dismantling and
  loosening them.
• 5. Rinse the bricks
• Once the soap has rested and had sufficient time
  to penetrate the brick, switch to a gentle spray
  design. It is extremely crucial that you utilize
  a gentle design since utilizing excessive force
  can and will harm the brick. Once again, we
  suggest starting with a low-force setting, and
  gradually adjusting to higher values if necessary.

9

• 6. Apply sealant
• Once the brick is spotless and dried, the final
  stage is to administer a sanctioned brick and
  mortar protector. This will aid in maintaining
  the cleanliness of your bricks for a longer
  period. Its similar to adding a wax and
  protective coating to your vehicle after a
  top-quality car wash. It serves as a shield,
  safeguarding and preserving its appearance.

10

• RZ Construction Group Inc is one of the best
  fully inclusive general and brick pointing
  contractors in Queens, NY. From initial design to
  final clean up, our results speak for themselves.
  We are fully licensed, insured, and bonded to
  provide both commercial and residential
  construction services to customers in Astoria and
  the surrounding area. We offer all kinds of
  services related to masonry and brick pointing in
  Queens NY. Proud to serve New York State for 25
  years. No job is too small nor too big. If you
  are looking for masonry contractors in Queens,
  NY or want to know more about our wide range of
  professional but affordable construction and
  repair services, reach out to us at (718)
  938-9887.