JR3PCI

1
JR3PCI
Installation Example
by J. Norberto Pires
2
Board JR3PCI with 4 channels Vendor ID Hex
1762 Device ID Hex 3114
Operating System Windows 2000 with Service Pack
3 (current example)
Other operating systems tested Windows
95/98/Me/XP/NT4
3
1. Power Down the computer and insert the board
into a PCI slot. Power up the computer.
2. Windows should detect the board and ask you to
install it. Wait. You need to install a
driver first.
3. Download the necessary files from
http//robotics.dem.uc.pt/norberto/jr3pci/
4. Unzip the files to one of your hard disks.
5. Open a command window and type like bellow
4
6. After this step your computer management
window should look like
5
7. The Plug Play software must be addressed
now. You should have windows like this in your
desktop
6
8. Say Next. Next window should appear.
7
9. Select Search for a suitable driver, and click
Next. Next window should appear.
8
10. Specify a location, and click Next. Next
window should appear.
9
11. Browse to where the software is located, and
click OK. Next window should appear.
10
12. Windows installs software and you get the
window.
11
13. After this your computer management should
look like
12
14. Please run the JR3PCI application to check
installation and register driver.
13
JR3PCI
All Done
Thanks for using my tools. J. Norberto Pires