Title: Electrical Product Testing and Certification: TESTING Philippines
1Electrical Product Testing and Certification
TESTING
Philippines
- The Bureau of Product Standards is responsible
for testing electrical products based on
Philippine National Standards for purposes of
product certification. - Voluntary
- All approved Philippine National Standards are
considered voluntary unless otherwise declared
mandatory.
2Electrical Product Testing and Certification
TESTING
Philippines
- Mandatory
- PS/ICC marking on products covered is compulsory
prior to selling. - Products which will affect life, safety and
health of the people and its environment - Approval by the Secretary of Trade and Industry
is necessary through Department Administrative
Order
3Electrical Product Testing and Certification
TESTING
Philippines
- Cont.
- How long has testing been required?
- - Testing depends on the parameters required by
specific standard. Normally, test period
including release of test reports takes three (3)
weeks (except on products that require
performance test or life test). - All electrical products tested, or a random
sample? - - Electrical products are sampled at random
- Any production line testing?
- - There is no production line testing, only
independent and in-plant laboratory testing
4Electrical Product Testing and Certification
TESTING
Philippines
- Cont.
- Who selects samples for type testing?
- - BPS product auditors select samples for
type testing - Who chooses the standard?
- - BPS chooses the standards in consultation
with the industry sector
5Electrical Product Testing and Certification
ACCREDITATION
Philippines
- Cont.
- Benefits this provides to the customer
- 1. Gain national and international
recognition of testing competence - 2. Have access to new markets who demand
for accreditation - 3. Reduce re-testing, customer complaints,
and activities that lead to waste of time
6Electrical Product Testing and Certification
ACCREDITATION
Philippines
- Organization (s) responsible for accreditation
- - BPS runs two (2) schemes for accreditation
- 1. BPS Laboratory Accreditation Scheme
(BPSLAS) - which accredits testing laboratories
- 2. BPS Accreditation Scheme (BAS)
- which accredits QMS certifying bodies
except - product certifying bodies
- Voluntary or Mandatory
- - Accreditation is voluntary
7Electrical Product Testing and Certification
ACCREDITATION
Philippines
- Cont.
- Any international or regional schemes, e.g.
IECEE-CB Scheme? - - BPS does not have any international or
regional schemes
8Electrical Product Testing and Certification
CERTIFICATION
Philippines
- Who certifies product manufacturer or third
party? - - BPS, a third party organization,
certifies products. - Process used to certify products
- - ISO System No. 5
- What events led to the current process?
- - Its the most ideal system in the
Philippine situation - Who chooses standard used for certification?
- - It is BPS in consultation with industry
sector - Are testing and certification by the same
organization - - Yes, it is BPS
9Electrical Product Testing and Certification
Case Study REFRIGERATORS
Philippines
- Applicable Standards
- 1. PNS 2191995 (IEC 335-2-24) Safety
- 2. PNS 396-21997 Performance and Labelling-
Energy Efficiency Factor (EEF) - Testing required
- - Yes, as per above standards
- Certification
- - Yes, being mandatory standards
10Electrical Product Testing and Certification
Case Study REFRIGERATORS
Philippines
- Cont.
- Impact the process has in the marketplace
- - Consumers now choose to buy certified
refrigerators with high EEF ratings, thus thrive
higher competition among manufacturers in terms
of product quality
11Electrical Product Testing and Certification
Expectation for the Future
Philippines
- Bi-lateral or multi-lateral agreements
- - In the near future, BPS will be a signatory
to APLAC/ILAC as well as to the PAC/IAF. - International Schemes
- - In the future, BPS Testing Laboratory will be
fully operating under the IECEE-CB Scheme
12Thank You!
Visit us Online! http//www.dti.gov.ph/bps Or
E-mail Us bps_at_dti.gov.ph