Industry Meeting 2003 - PowerPoint PPT Presentation

1 / 18
About This Presentation
Title:

Industry Meeting 2003

Description:

... concrete, paving units, elastomeric seals, lighting columns, ... Elastomeric seals 01-12-2003. CE Marked products. Cement. Geotextiles. Structural bearings ... – PowerPoint PPT presentation

Number of Views:24
Avg rating:3.0/5.0
Slides: 19
Provided by: CALL74
Category:

less

Transcript and Presenter's Notes

Title: Industry Meeting 2003


1
Industry Meeting 2003 The development of
harmonized technical specifications Brussels 22
January 2003
Georg Hongler CEN
2
Contents
  • CEN Construction Sector Network Recommendations
  • 2 Development of harmonized technical
    specifications by CEN

3
Priorities
  • The CEN Construction Sector Network Workshop of
    September 2002 recommended to complete the first
    and second generation harmonised product
    standards as short and midterm priorities.
  • The major subjects for the revision of the
    harmonised standards were identified as
  • Durability
  • Regulated substances
  • And environmental issues

4
Fast track procedure
  • New Fast Track Procedure
  • CSN asks CEN/BT to develop a more effective fast
    track procedure to enable amendments of European
    Standards to be published quicker than via the
    Unique Acceptance Procedure (UAP).

5
Task Group for durability
The CEN Construction Sector Network Workshop
recommended the establishment of a task group to
address the issue of durability in harmonised
product standards.
6
Environmental aspects
  • The CEN Construction Sector Network Workshop
    stresses the need for a workshop on environmental
    aspects in co-operation between construction and
    environment CEN/TC's

7
Informative documents
  • The CEN Construction Sector Network Workshop asks
    that CEN Technical Committees to develop short
    informative documents for designers and
    contractors to explain the content and choices
    for the use of each product in a harmonised
    European Standard.
  • In order to ensure a consistent approach a
    template should be developed by the CSN Core
    Group with the help of FIEC.

8
Candidate Harmonized Product Standards
  • Total having reached CMC 166
  • Approved 115
  • Made available (published) 91
  • Cited in OJEC 71
  • Undergoing Formal Vote/UAP 15
  • In CMC for Formal Vote/UAP 30
  • Under appeal 6

9
Harmonized Standards
  • cited in OJEC 71
  • Products covered
  • Cement, geotextiles, fixed firefighting systems,
    structural bearings, waste water engineering,
    precast concrete, thermal insulation, gypsum,
    building hardware, admixtures for concrete,
    paving units, elastomeric seals, lighting
    columns, aggregates, adhesives for tiles

10
Mandatory CE marking
  • Cement 01-04-2002
  • Geotextiles 01-10-2002
  • Structural bearings 01-10-2002
  • Waste water engineering 01-10-2002
  • Precast concrete elements
  • for fences 01-03-2003
  • Thermal insulation products 01-03-2003
  • Gypsum blocks and adhesives 01-04-2003
  • Building hardware 01-04-2003
  • Admixtures for concrete 01-05-2003
  • Paving units 01-10-2003
  • Elastomeric seals 01-12-2003

11
CE Marked products
  • Cement
  • Geotextiles
  • Structural bearings
  • Thermal insulation products

12
Importance of standards finalized
13
Importance of standards finalized
14
Importance of standards finalized
15
Importance of standards finalized
16
Importance of standards finalized
17
Availability of candidate harmonized standards
18
KEYMARK vs. CE Marking
  • CE marking
  • Mandatory
  • Conformity with essential requirements
  • Notified bodies (if required)
  • KEYMARK
  • Voluntary
  • Conformity with the European Standard
  • Empowered certification bodies
Write a Comment
User Comments (0)
About PowerShow.com