Chapter 7 Thermodynamics:

1

• Chapter 7 Thermodynamics
• System
• Energy
• The First Law
• Work/Heat
• Internal energy (E)
• Heat capacity
• State changes (s,l,g)
• HE PV
• Reaction Enthalpies

2

• Thermodynamics is the science of heat (energy)
  transfer.

Heat energy is associated with intramolecular and
extramolecular motions.
Heat transfers until thermal equilibrium is
established.
3
UNITS OF ENERGY

• 1 calorie heat required to raise temp. of 1.00
  g of H2O by 1.0 oC.
• 1000 cal 1 kilocalorie 1 kcal
• 1 kcal 1 Calorie (a food calorie)
• But we use the unit called the JOULE
• 1 cal 4.184 joules

4
A system Ex. System is a reaction
mixture Surroundings atmosphere around the
reaction mixture
5
Directionality of Heat Transfer

• Heat always transfer from hotter object to cooler
  one.
• EXOthermic heat transfers from SYSTEM to
  SURROUNDINGS.

6
Combustion of octane

• 2C8H18(l) 25O2(g)? 18H2O (l) 16CO2 (g)
• DHrxn -10.9 103 kJ -10.9 MJ
• 5.45 103 kJ of energy released per mol of
  octane
• Combustion of 1 gallon of gas ?136 MJ energy

7
Directionality of Heat Transfer

• Heat always transfer from hotter object to cooler
  one.
• ENDOthermic heat transfers from SURROUNDINGS to
  the SYSTEM.

The example in the figure illustrates the
melting of ice.Note that for state changes the
temperature is constant. All energy is consumed
by thestate change. Only the T(surr)goes down
in this case.
8
Energy capacity to do work or to produce heat
1
ek
mv2

• Kinetic energy (KE) motion of object,
• Potential energy (PE) due to position or
  composition
• (bonds, height of a mass)
• Ex. Combustion of methane (CH4) potential
  energy stored in bonds in converted to kinetic
  energy (thermal energy) via heat.
• Heat is the form of energy that flows between 2
  objects because of their difference in
  temperature, always transfer from hotter object
  to cooler one.
• Electrical energy, Light energy

2
kg m2
J
s2
9
Energy Chemistry

• All of thermodynamics depends on the law of
• CONSERVATION OF ENERGY.
• The total energy is unchanged in a chemical
  reaction.
• If PE of products is less than reactants, the
  difference must be released as KE.

10
First law of thermodynamics

• The total energy of the universe is constant.
• Also known as Law of Conservation of Energy
  energy is neither created nor destroyed in
  ordinary chemical reactions
• Energy in Joules

11
Internal Energy changeHeat Work

• The internal energy of a system E is the sum of
  kinetic and potential energies of all particles.
• The internal energy is state function E(p,v,T)
• The internal energy is the capacity of a system
  to do work its total store of energy.
• DE Efinal Einitial q w
• q is heat w is work
• The heat and the work are not state functions.

12
Work

• Work change in energy when an object is moved
  through a distance
• Example of work
• compression or expansion of a gas
• W -Pex D V

13
(No Transcript)
14
A system doing work (i.e. expansion of a gas).
Work is proportional to the external pressure
and change in volume.
15

• 3.1 HW. A gas in a cylinder of an engine expands
  by 500.0 mL against a pressure of 1.20 atm. What
  is the magnitude of the work involved? Is work
  done by or on the gas?

16
Maxwell distributions One gas (50g/mol) at
three different temperatures
17
Standard Enthalpies of Formation
18
Standard Enthalpies of Reaction
?Hoverall -2?HfNaHCO3 ?HfNa2CO3 ?HfCO2
?HfH2O
19
Enthalpy of Reaction
?Hrxn ??Hfproducts- ??Hfreactants
20
(No Transcript)
21
The work is not state function

• If the pressure is changing during the volume
  change a Pex(V) function can be constructed
• Then the work is an integral, and not a simple
  state function
• Consequently the heat is not a state function

22
The work at constant pressure

• If Pex is constant, then the integral is
  simplified to
• W -Pex (Vfinal Vinitial) -Pex DV
• In this special case the work will depend only on
  the Vfinal and Vinitial, and it will behave like
  a state function
• As the heat (q) is DE w DE Pex DV, it will
  also behave like a state function

23
Enthalpy, state function

• The Enthalpy change is equal to the transferred
  heat at constant pressure
• DH qp DE Pex DV
• Hfinal Hinitial Efinal Einitial Pex
  (Vfinal Vinitial)
• DH gt 0 Endothermic
• DH lt 0 Exothermic
• The enthalpy is a state function H(P,V,T)
  E(P,V,T) P V or simpler
• H E P V

24
HEAT CAPACITY

• The heat required to raise an objects T by 1 C.

25
Specific Heat Capacity

• How much energy is transferred due to T
  difference?
• The heat (q) lost or gained is related to
• a) sample mass
• b) change in T and
• c) specific heat capacity

26
Specific Heat Capacity

• Substance Spec. heat (Jg-1K-1)
• H2O 4.184
• Ethylene glycol 2.39
• glass 0.84
• Aluminum 0.897

27
per gram of substance per mol
28
Specific Heat Capacity

• If 25.0 g of Al cool from 310 oC to 37 oC, how
  many joules of heat energy are lost by the Al?

29
Specific Heat Capacity

• If 25.0 g of Al cool from 310 oC to 37 oC, how
  many joules of heat energy are lost by the Al?

where ?T Tfinal - Tinitial q (0.897
J/gK)(25.0 g)(37 - 310)K q - 6120 J
Notice that the negative sign on q signals heat
lost by or transferred OUT of Al.
30
Heat TransferNo Change in State

• q transferred (sp. ht.)(mass)(?T)

31
Heat Transfer with Change of State

• Changes of state involve energy (at constant T)
• Ice 333 J/g (heat of fusion) ? Liquid water
• q (heat of fusion)(mass)

32
Heat Transfer and Changes of State
Liquid ? Vapor

• Requires energy (heat).
• This is the reason
• a) you cool down after swimming
• b) you use water to put out a fire.

energy
33
Heating/Cooling Curve for Water
Evaporate water
Heat water
Note that T is constant as ice melts
Melt ice
34
Heat Changes of State

• What quantity of heat is required to melt 500. g
  of ice and heat the water to steam at 100 oC?

Heat of fusion of ice 333 J/g Specific heat of
water 4.2 J/gK Heat of vaporization 2260 J/g
35
Heat Changes of State

• What quantity of heat is required to melt 500. g
  of ice and heat the water to steam at 100 oC?
• 1. To melt ice
• q (500. g)(333 J/g) 1.67 x 105 J
• 2. To raise water from 0 oC to 100 oC
• q (500. g)(4.2 J/gK)(100 - 0)K 2.1 x 105
  J
• 3. To evaporate water at 100 oC
• q (500. g)(2260 J/g) 1.13 x 106 J
• 4. Total heat energy 1.51 x 106 J 1510 kJ

36
Enthalpies of Phase Change

• Condensation (exothermic)
• Vaporization (endothermic)
• Freezing (exothermic)
• Melting (endothermic)
• Solidification (exothermic)
• Sublimation (endothermic)

37
(No Transcript)
38

• 3.2. HW How much heat is needed to vaporize
  150. g of benzene?
• The boiling point of benzene is 80o C.
• The DHvapo (benzene) is 30.8 kJ/mol.

39

• Calorimeter To determine the heat associated
• with a chemical reaction
• temperature change of a reaction or substance is
  measured

fancy one!
40
CH4(g) 2O2(g) ? CO2(g) 2H2O(l)
41
Example 7-3

• Using Bomb Calorimetry Data to Determine a Heat
  of Reaction.
• The combustion of 1.010 g sucrose, in a bomb
  calorimeter, causes the temperature to rise from
  24.92 to 28.33C. The heat capacity of the
  calorimeter assembly is 4.90 kJ/C.
• What is the heat of combustion of sucrose,
  expressed in kJ/mol C12H22O11
• Verify the claim of sugar producers that one
  teaspoon of sugar (about 4.8 g) contains only 19
  calories.

42
Example 7-3
Calculate qcalorimeter
qcal C?T (4.90 kJ/C)(28.33-24.92)C
(4.90)(3.41) kJ 16.7 kJ
per 1.010 g
43
Example 7-3
Calculate qrxn in the required units
-16.7 kJ
qrxn -qcal
-16.5 kJ/g
1.010 g
Calculate qrxn for one teaspoon
44
3.3. HWNaOH HCl ? H2O NaCl

• 50.0 mL of 1.0 M NaOH is mixed with 50.0 mL of
  1.0 M HCl at 25.0 oC. The temperature of the
  solution increases to 31.9 oC. What is the total
  heat released? How much energy is released per
  mol of reactant? What is the enthalpy (DH) for
  the reaction?

45
3.4. HWSO2(g) O2(g) ? SO3(g)

• 2.00 mols SO2 are reacted with 1.00 mol O2 at 25o
  C and 1.00 atm. 198 kJ of energy is released as
  heat. Calculate DH and DE.

46
P DV Dn R T
SO2(g) O2(g) ? SO3(g) at 25o C and 1.0 atm
47
C2H5OH(l) 3O2(g) - 1367 kJ ? 2CO2(g) 3H2O(l)
per mol reaction means per total number mols
of each substance in balanced equation
DHrxn - 1367 kJ
48
3.5. HW4Al(s) 3O2(g) ? 2Al2O3(s) DHrxn
-3352 kJ/mol rxn

• How much heat is released upon reaction of 24.2 g
  Al at 25o C and 1 atm?

49
3.6. HWCuSO4(aq) 2NaOH(aq) ? Cu(OH)2(s)
Na2SO4(aq)

• 50.00 mL of 0.400 M CuSO4 reacts with 50.00
  mL of 0.600 M NaOH at 1 atm. The total heat
  evolved is 1.49 kJ. What is DHrxn?

50
Thermochemical Standard States

• DHorxn standard heat of reaction
• (1 atm, 298 K, 1 M)
• DHfo standard molar enthalpy of formation
• change in DH when one mol of a substance is
  formed from its constituent elements
• H2(g) Br2(l) ? 2HBr(g) DHorxn -72.8 kJ
• ½H2(g) ½Br2(l) ? HBr(g) DHof (HBr)
  -36.4 kJ/mol

51
2C(graphite) 3H2(g) ½O2(g) ? C2H5OH(l)
DHfo(C2H5OH) -277.7 kJ/mol DHorxn -277.7
kJ/mol rxn

52
Note Scale and Sign

• CH4(g) 2O2(g) ? CO2(g) 2H2O(l)
• DHr -890 kJ
• 2CH4(g) 4O2(g) ? 2CO2(g) 4H2O(l)
• DHr -1780 kJ
• CO2(g) 2H2O(l) ? CH4(g) 2O2(g)
• DHr 890 kJ

53
Note Forms of Reactants and Products are
Important

• CH4(g) 2O2(g) ? CO2(g) 2H2O(g)
• DHr -802. kJ
• CH4(g) 2O2(g) ? CO2(g) 2H2O(l)
• DHr -890. kJ

54
Hesss Law Law of SummationThe enthalpy of a
reaction can be estimated by summing the
enthalpies of sub-steps of the reaction.
DHrxno DHao DHbo DHco DHdo .
(sub-steps of reaction) DHrxn is an extensive
property, it is proportional to the amounts of
substances (stoichiometry). Reversing a
chemical equation changes the sign of a function
of state (e.g. DHrxno) related to that equation.
By definition, ?Hfo 0 for elements in their
standard states.
55
Hesss Law Energy Level Diagrams
Forming H2O can occur in a single step or in a
two steps. ?Htotal is the same no matter which
path is followed.
56
Hesss Law Energy Level Diagrams

• Forming CO2 can occur in a single step or in a
  two steps. ?Htotal is the same no matter which
  path is followed.

57
Using Standard Enthalpy Values

• Use ?Hs to calculate enthalpy change for
• H2O(g) C(graphite) ? H2(g) CO(g)

58
Using Standard Enthalpy Values

• H2O(g) C(graphite) ? H2(g) CO(g)
• From reference books we find
• H2(g) 1/2 O2(g) ? H2O(g)
• ?Hf of H2O vapor - 242 kJ/mol
• C(s) 1/2 O2(g) ? CO(g)
• ?Hf of CO - 111 kJ/mol

59
Using Standard Enthalpy Values

• H2O(g) ? H2(g) 1/2 O2(g) ?Ho 242 kJ
• C(s) 1/2 O2(g) ? CO(g) ?Ho -111 kJ
• --------------------------------------------------
  ------------------------------

H2O(g) C(graphite) ? H2(g) CO(g)
?Honet 131 kJ
To convert 1 mol of water to 1 mol each of H2 and
CO requires 131 kJ of energy. The water gas
reaction is ENDOthermic.
60
Hesss Law Law of Summation
C(gr) O2(g) ? CO2(g) What is the DHrxno
? C(gr) ½O2(g) ? CO(g) DHo -110.5
kJ CO(g) ½O2(g) ? CO2(g) DHo -282.0
kJ C(gr) O2(g) ? CO2(g) By definition, ?Hfo
0 for elements in their standard states here
C(gr) and O2(g)
61
Relationship between DHf and DHrxn
62
Using Standard Enthalpy Values
CH3OH(g) 3/2 O2(g) ? CO2(g) 2 H2O(g) ?Horxn
? ?Hfo (prod) - ? ?Hfo (react)

• ?Horxn ?Hfo (CO2) 2 ?Hfo (H2O)
• (-393.5 kJ) 2 (-241.8 kJ)
• - 3/2 ?Hfo (O2) ?Hfo (CH3OH)
• - 0 (-201.5 kJ)
• ?Horxn -675.6 kJ per mol of methanol

63
3.7. HWHesss Law another example

• Find DHrxno for
• C(gr) 2H2(g) ? CH4(g)
• - - - - - - - - - - - - - - - - - - - - - - - - -
  - - -
• CH4(g) 2O2(g) ? CO2(g) 2H2O(l) -890.3 kJ
• Standard enthalpies of formations
• C(gr) O2(g) ? CO2(g)
  -393.5 kJ
• H2(g) ½O2(g) ? H2O(l)
  -285.8 kJ

64
DHrxno estimated based on DHfo of products and
reactants.DHrxno SnDHfo(products)
-nDHfo(reactants)

• Example C2H4(g) H2O(l) ? C2H5OH(l)
• What is DHrxno ?
• DHfo(C2H4 (g)) 52.3 kJ/mol
• DHfo(H2O (l)) -285.8 kJ/mol
• DHfo(C2H5OH (l)) -277.7 kJ/mol

65

• 3.8. HW2 NH2CH2COOH (s) 3O2(g) ?
• H2NCONH2(s) 3CO2 (g) 3H2O(l)
• What is the standard enthalpy of reaction?
• What is the enthalpy per mol of NH2CH2COOH
  (glycine reactant)?

66
Combustion

• DHco standard enthalpy of combustion
• Combustion reaction of substance with O2 to
  produce CO2 and H2O
• change in enthalpy per mol of substance burned
• Ex. CH4(g) 2O2(g) ? CO2(g) 2H2O(l)
• 
  DHrxn -890.kJ
• 1 mol CH4 combustion 890 kJ or DHco
  890. kJ/mol

67
(No Transcript)
68
Bond Enthalpy

• Strength of a chemical bond DHb
• Use bond enthalpies to estimate DHrxno

What is the strength of a C-H bond?
69
Average Single Bond Enthalpies (kJ/mol)
H2(g) ? H(g) H(g) DH BE 436
kJ/mol HCl(g) ? H(g) Cl(g) DH BE
432 kJ/mol
70
Single and Multiple Bond Enthalpies (kJ/mol)
71
Bond enthalpies are reported as average values.
410 kJ/mol 393 kJ/mol
72
Using bond enthalpies to estimate DHrxnoWhat is
the DHrxn?

• DHrxn S BE (reactants) - S BE (products)
• DHrxn S BE (bonds broken) - S BE (bonds formed)
  

73

• How much energy is released in this burning
  reaction approximatively?
• C3H8(g) 5O2(g) ? 3CO2(g) 4H2O(g)
• 2 C-C (345) 8 C-H (415) 5 OO (495) ? 6 CO (800)
  8 O-H (460)
• Broken bonds Formed bonds
• 6485 kJ 8480 kJ
• DE 6485-8480 -1995 kJ (release of energy)
• Notice the small OO and the large CO energies
• The correct value is -2200 kJ

74
3.9. HWUsing bond enthalpies to estimate
DHrxnoWhat is the DHrxn?

• Br2(g) 3F2(g) ? 2BrF3(g)
• DHrxn S BE (reactants) - S BE (products)
• BE (Br2) 192 kJ
• BE (F2) 159 kJ
• BE(BrF) 197 kJ