MEC1011 Fall

1
MEC1011 Fall04 Assignment 1 Due at the end of
Week 2 Reference Lessons 5 6 and complete the
following.

• Start a new project named after your username and
  located in V/MEC/1011/Fall_04/CADD/Assignment_2/T
  x.
• Create a part or parts that demonstrate the
  following features
• Name your files to reflect the skills
  demonstrated ie (Revolve_Shell.ipt)
• Revolve (Be sure to use a centerline designation
  for the center of the revolution)
• Chamfer
• Coil
• Thread
• Extrude
• Fillet
• Emboss
• Shell
• Hole (Place a hole using hole point, hole center
  to mark as the center)
• Circular Pattern (the feature not the sketch
  tool)
• Rectangular Pattern
• Derived component
• Start a new part and name it A2-15 and insert the
  AutoCad file that is in V/MEC/1011/Fall_04/Assign
  ment1/ACAD Drawings. (The Drawing Number will be
  assigned to you by the instructor)
• Rotate the entire shape 90 degrees
• Move one of the holes to a different location.
• Extrude the revised shape to 1.625.

2
Making a project folder

• In INVENTOR
• Choose Project from file menu
• Then make new project.

Then choose single user project And fill in the
file information as shown. And click finish to
end the wizard. You will be asked if you want a
new folder to be created. YES you do.
Your name
V\MEC1011\Assignment_X\T1A\UserName
File Location