Second Law of Thermodynamics Engines and Refrigerators - PowerPoint PPT Presentation

About This Presentation
Title:

Second Law of Thermodynamics Engines and Refrigerators

Description:

Second Law of Thermodynamics Engines and Refrigerators * A heat engine takes in 1200 J of heat from the high-temperature heat source in each cycle and does 400 J of ... – PowerPoint PPT presentation

Number of Views:379
Avg rating:3.0/5.0
Slides: 22
Provided by: CorleonU
Category:

less

Transcript and Presenter's Notes

Title: Second Law of Thermodynamics Engines and Refrigerators


1
Second Law of ThermodynamicsEngines and
Refrigerators
2
Heat Engine
  • Any device that transforms heat partly into work
    or mechanical energy
  • working substance matter inside the engine
    which undergoes inflow and outflow of heat,
    expansion and compression, and sometimes phase
    change

3
how it works
  • Working substance absorbs heat from the hot
    reservoir
  • Performs some mechanical work
  • Discards the remaining energy in the form of heat
    into the cold reservoir
  • cyclic process

Young
4
1st law applied to WS
  • QHgt0 WS absorbs heat from HR
  • QClt0 WS discards heat into CR
  • Wgt0 WS performs mechanical work
  • ?U0 after one cycle

1st law Q ?U W Qnet W QH QC W QH
- QC W
5
thermal efficiency
  • e W/QH
  • (QH-QC)/QH
  • 1 (QC/QH)

6
Refrigerator
  • takes heat from a cold place and gives of heat to
    a warmer place
  • requires a net input of mechanical work
  • working substance refrigerant fluid
  • cold reservoir inside of refrigerator
  • hot reservoir outside of refrigerator

7
how it works
  • fluid absorbs heat from the cold reservoir
  • work is done on the fluid
  • energy from heat transfer and work done is
    discarded into the hot reservoir
  • cyclic process

Young
8
  1. the fluid in the evaporator coil is colder than
    the inside of the ref, so it absorbs heat
  2. the compressor takes in fluid and compresses it
    adiabatically (work is done on the fluid)
  3. fluid is delivered to condenser at high pressure,
    fluid temperature is higher than that of
    surrounding air, fluid gives of heat and
    condenses
  4. fluid expands adiabatically (expansion valve)
    into the evaporator and cools considerably

Young
9
1st law applied to fluid
  • QCgt0 fluid absorbs heat from CR
  • QHlt0 fluid discards heat into HR
  • Wlt0 work is done on fluid
  • ?U0 after one cycle

1st law Q ?U W Qnet W QH QC
W -QH QC -W QC W QH
10
coefficient of performance
  • K QC/W
  • QC/(QH-QC)

11
  • A heat engine takes in 1200 J of heat from the
    high-temperature heat source in each cycle and
    does 400 J of work in each cycle. How much heat
    is released into the environment in each cycle?
  • 400 J
  • 800 J
  • 1200 J
  • 1600 J

12
  • A heat engine takes in 1200 J of heat from the
    high-temperature heat source in each cycle and
    does 400 J of work in each cycle. What is the
    efficiency of this engine?
  • ¼
  • 1/3
  • 3
  • 4

13
  • In one cycle, a heat engine takes in 900 J of
    heat from a high-temperature reservoir and
    releases 600 J of heat to a lower-temperature
    reservoir. How much work is done by the engine in
    each cycle?
  • 300 J
  • 600 J
  • 900 J
  • 1500 J

14
  • In one cycle, a heat engine takes in 900 J of
    heat from a high-temperature reservoir and
    releases 600 J of heat to a lower-temperature
    reservoir. What is its efficiency?
  • 3/9
  • 6/9
  • 3/15
  • 6/15

15
  • In one cycle a heat engine does 400 J of work and
    releases 500 J of heat to a lower-temperature
    reservoir. How much heat does it take in from the
    higher-temperature reservoir?
  • 100 J
  • 400 J
  • 500 J
  • 900 J

16
  • In one cycle a heat engine does 400 J of work and
    releases 500 J of heat to a lower-temperature
    reservoir. What is the efficiency of the engine?
  • 4/9
  • 4/5
  • 5/9
  • 1

17
  • In one cycle, a heat engine takes in 1000 J of
    heat from a high-temperature reservoir, releases
    600 J of heat to a lower-temperature reservoir,
    and does 400 J of work. What is its efficiency?
  • ¼
  • 1/3
  • 2/5
  • 3/5

18
  • A heat pump takes in 300 J of heat from a
    low-temperature reservoir in each cycle and uses
    150 J of work per cycle to move the heat to a
    higher-temperature reservoir. How much heat is
    released to the higher-temperature reservoir in
    each cycle?
  • 150 J
  • 300 J
  • 450 J
  • 600 J

19
  • A heat pump takes in 300 J of heat from a
    low-temperature reservoir in each cycle and uses
    150 J of work per cycle to move the heat to a
    higher-temperature reservoir. What is the
    coefficient of performance (COP)?
  • 1/3
  • 1/2
  • 2
  • 3

20
  • In each cycle of its operation, a refrigerator
    removes 18 J of heat from the inside of the
    refrigerator and releases 30 J of heat into the
    room. How much work per cycle is required to
    operate this refrigerator?
  • 12 J
  • 18 J
  • 30 J
  • 48 J

21
  • In each cycle of its operation, a refrigerator
    removes 18 J of heat from the inside of the
    refrigerator and releases 30 J of heat into the
    room. What is the COP of this refrigerator?
  • 18/12
  • 30/12
  • 12/30
  • 18/30
Write a Comment
User Comments (0)
About PowerShow.com