KX-TDA200/100 System (Ver.1.0)

1
KX-TDA200/100 System (Ver.1.0)
Chapter 5 Programming

• Panasonic Communications Co., Ltd.
• Network Business Company
• Edition 1.3

2
Chapter 5 Programming
1. Initial/On-site Programming
3/24 2. Remote
Programming
7/24 3. System Update

10/24
3
Initial/On-site Programming (1/4)
DPT(with LCD)
KX-TDA system can be programmed by two
devices. (1) Any DPT(with LCD display). (2)
PC-Program. (NOTE!) Remote programming can not
be used for the initial programming.
PC-Program
4
Initial/On-site Programming (2/4)
PC-Program (1/2)
USB (DPT)
USB (System)
We can not use the following interface for the
initial programming of the system. (1) LAN. (2)
Modem SLT port (RMT card). (3) ISDN
ISDN-Extension port. (LAP-B)
RS-232C (System)
The system data is saved to SD card with the
following cases.
(1)When the system initial start up finished.
(2)When you disconnect the PC programming.
(3)Every hour.
(4)Click ICON(SD memory backup) manually.
5
Initial/On-site Programming (3/4)
PC-Program (2/2)
PC-Program has the Quick Setup feature for the
initial programming(just after clearing the
system).
By programming the following simple and limited
items, you can start the system quickly.
Item
Parameter
Item
Parameter
1. Pattern-1(with ) 2. Pattern-2(without )
Date
Flexible Numbering Type
Year / Month / Date
Time
Hour / Minute
System Password
4-10 Digits.
Operator / Local access
1. 0 / 9 (US Style) 2. 9 / 0 (UK Style)
You can change only the password of your entry
level. You can skip this process, if you okay
with the default password.
( Administrator or User )
Select upload the file for multi-Language
data area(5) in SD card.
Language Data Upload
Extension Numbering
1. Automatic 2. Manual
Operator Manager
(Automatic Extension Numbering mode only)
LCD Language
Select the LCD display language data from 5.
6
Initial/On-site Programming (4/4)
PT Program (1/1)
DPT(with LCD)
All the DPT can be the initial programming
terminal after the system data clearing. You can
program the system from any extension(PT) port.
PROG 1234
System Program mode
Default password
7
Remote Programming (1/3)
Analog Modem Interface
Option !
RMT Card KX-TDA0196
Any Trunk card
DISA Transfer DIL
Telephone Network
Any Trunk
Analog Modem
PC-Program
MPR Card
8
Remote Programming (2/3)
ISDN LAP-B Interface
Only the single channel(64kbps) communication is
supported.
No Option !
ISDN-BRI
ISDN Telephone Network
Built-in TA function of ISDN-BRI card makes
digital link to the ISDN modem by LAP-B protocol.
ISDN
ISDN-BRI/PRI Card
ISDN Modem
PC-Program
9
Remote Programming (3/3)
If you want to access from Internet(WAN) side,
you must consider the setting of FireWall.
LAN Interface
Ethernet 10Base-T
LAN (IP Network)
Ethernet 10Base-T
TCP/IP Port 35300 (35300 - 39999 is reserved.)
LAN Card
PC-Program
10
System Update (1/14)
MPR Software Update(1)
MPR card
SD card
New program files
PC-Program
New program files of MPR can be uploaded by
PC-Program. The uploaded data is stored in SD
card on MPR card. (You do not need to use EPROM
Programmer ! )
11
System Update (2/14)
MPR Software Update(2)
MPR card
New SD card
Old SD card
Remove !
Insert !
Old data
New data
New program files of MPR can also be installed by
simply changing the SD card physically.
12
System Update (3/14)
LPR Software Update
LPR cards
SD card
New data
New program files
PC-Program
Flash-ROM on each card.
New program files of each free-slot / option-slot
card can be uploaded by PC-Program. The uploaded
data is once stored in SD card on MPR card. Then
downloaded to the Flash-ROM on the LPR. (You do
not need to use EPROM Programmer ! )
13
System Update (4/14)
All Software Update
MPR card
SD Card adapter
SD card
New program files
PC-Program
All of the new files can also be installed by the
direct overwriting of the files on SD card with
using SD Card adapter of PC.
14
MPR Software Update by PC-Program (5/14)
(Program File transfer from PC to SD card)
ltStep1gt You have to prepare the following program
file on your HDD of PC.
(1)Pmpr(Control software)
(2)Dlng0(Language for PT System Program/English),
Dlng1(Language 1/English)
(3)DSYS(System data)
ltStep2gt You have to transfer the program file
from HDD of PC to SD card.
b. Select File Transfer PC to PBX Then file
select dialogue box appears, you have to
select following target program file one by
one.. (Pmpr, Dlng0, Dlng1, DSYS)
c. After you select the program file, this
dialogue box appears. Program file
transfer takes around 20 minutes by USB. When
transfer finished, completed message appears,
and program file name is registered
automatically into the memory.
15
System Update by PC-Program (6/14)
Operation1 Program File Transfer
You must prepare the program file on your HDD
beforehand.
a. Select Utility

1. Select File Transfer PC to PBX Then file select
   dialogue box appears, you can select target
   program file.

16
System Update by PC-Program (7/14)
Operation2 Card status change to out of service
Program file load is available only for out of
service status card. Open Configuration-SLOT
screen and change the status.
17
System Update by PC-Program (8/14)
Operation3 Program File View and Load (1/4)
It shows the file which is available for download.
a. Select Utility
b. Select SD Card File View and Load Then
following screen appears.

1. This screen gives an information as kind of files
   that the memory card has.The first character of
   the program file is P. For example, PDHLC is
   DHLC/DLC cards program.

18
System Update by PC-Program (9/14)
Operation3 Program File View and Load (2/4)
You must select target program file from the
memory.
19
System Update by PC-Program (10/14)
Operation3 Program File View and Load (3/4)
It shows program file header information.
20
System Update by PC-Program (11/14)
Operation3 Program File View and Load (4/4)
You should compare header information of card and
memory.
21
Files of SD Card (12/14)
Control Software of KX-TDA system. File is always
loaded to the DRAM when the system is started.
Backup of the software for each type of LPR
cards. They are manually downloaded to each card
by the operation from PC-Program.
Backup of the software for each type of CS unit
for the wireless terminal. They are manually
downloaded to each card by the operation from
PC-Program.
22
Files of SD Card (13/14)
System data. Files are always loaded to the DRAM
when the system is started.
Language data. 5 different language data can be
stored for the display on PT. They are selectable
from the operation of PT individually. Files are
always loaded to the DRAM when the system is
started.
23
Files of SD Card (14/14)
Default data. When the system data is cleared,
the default system data is created by using those
data. By updating those files, you can change
the default parameter of the system. Same types
of the data-set is prepared in PC-Programming and
downloaded to this area by using the quick-setup
operation.
24
Chapter 5 Programming
Thank you very much !