171-SH2346-1458

1
(No Transcript)
2
171-SH2346-1458
3
(No Transcript)
4
Box with Pre-Installed 101/2" Pigtail

• Popular 4" square boxes and switch boxes
• Pre-installed 101/2" insulated grounding pigtails
• Save on labor costs by eliminating multiple
  installation steps

521711234EP
5
Box with Pre-Installed 101/2" Pigtail
6
Box with Pre-Installed 101/2" Pigtail and Box
Support Cover

• 4" square welded box, 11/2" or21/8" deep
• Pre-installed 101/2" insulatedgrounding pigtail
• Box support cover combines box-to-stud mounting
  bracket with device cover
• One- or two-device box support cover, raised
  1/2", 5/8", or 3/4"
• Save on labor costs by eliminating multiple
  installation steps

52171-CM14-5/8
52171-CM14-5/8mounted to stud
7
Box with Pre-Installed 101/2" Pigtail and Box
Support Cover
8
Box with Pre-Installed 101/2" Pigtail, Raised
Cover, and Box-to-Stud Bracket

• 4" square welded box, 11/2" or 21/8" deep
• Pre-installed 101/2" insulated grounding pigtail
• One- or two-device cover, raised 1/2", 5/8", or
  3/4"
• SSF-SH2346 box-to-stud mounting bracket
• Save on labor costs by eliminating multiple
  installation steps

SSF-SH2346
171-SH2346-1458
9
Box with Pre-Installed 101/2" Pigtail, Raised
Cover, and Box-to-Stud Bracket
10
Box with Pre-Installed 101/2" Pigtail, Raised
Cover, and Vertical Mounting Bracket

• 4" square welded box, 11/2" or 21/8" deep
• Pre-installed 101/2 " insulated grounding pigtail
• One- or two-device cover, raised 1/2", 5/8", or
  3/4"
• 12" (SSF-SV12) or 18" (SSF-SV18) vertical
  mounting bracket
• Save on labor costs by eliminating multiple
  installation steps

151-SV12-1458
151-SV18-1458
11
Box with Pre-Installed 101/2" Pigtail, Raised
Cover, and Vertical Mounting Bracket
12
(No Transcript)
13
Box with Pre-Installed 101/2" Pigtail

• Popular 4" square boxes and switch boxes
• Pre-installed 101/2" insulated grounding pigtails
• Save on labor costs by eliminating multiple
  installation steps

521711234EP
14
Horizontal Mounting Brackets

• Constructed of 24-gauge steel
• Can be mounted at any height to meet individual
  project requirements
• Device cover (mud ring) mounts to front of
  bracket to set box in desired location
• Versatile, open design enables mounting of box in
  any location across horizontal plane between
  studs
• Stamped rule on bracket with 1/4", 1/2", and 1"
  markings enables fast box setting

SBO16 mounted to 16" studs with one 4" square
box installed
SBO24 mounted to 24" studs with one 4" square
box installed
15
SBO16 Stud-to-Stud Horizontal Mounting Bracket

• Pre-measured on center for 16" stud spacing
• Accepts three 4" square or two 4" boxes (deep or
  shallow)

SBO16
SBO16 mountedto 16" studs withone 4" squarebox
installed
SBO16 mountedto 16" studs withthree 4"
squareboxes (full capacity) installed
16
SBO24 Stud-to-Stud Horizontal Mounting Bracket

• Pre-measured on center for 24" stud spacing
• Accepts five 4" square or four 411/16" boxes
  (deep or shallow)

SBO24
SBO24 mountedto 24" studs withone 4" squarebox
installed
SBO24 mounted to 24" studs with five 4"
squareboxes (full capacity) installed
17
SV1218 Floor-Track 12" and 18" Vertical Mounting
Bracket

• Mounts to floor track easily with screws through
  three pre-punched holes in bottom plate
• Offers pre-measured box-mount locations at 12"
  and 18" from floor fast installation with no
  measuring required
• Accepts 4" square or 411/16" boxes (deep or
  shallow) with standard device covers
• Supplied with horizontal cross-support bar for
  stability after installation

SV1218
18
SV1218 Floor-Track 12" and 18" Vertical Mounting
Bracket (continued)

• Support bar sits in two slotted tabs on backside
  of vertical bracket and mounts from stud to stud
  horizontally
• Support bar pre-measured for 24" stud cavities
  (score lines provided for 16" stud cavities) with
  pre-punched holes at stud locations for left or
  right stud installation

SV1218 mounted to floor track and studs with one
4" square box installed
19
SVX Adapter Plate for SV1218 Floor-Track Vertical
Mounting Brackets
SVX with box installed
SVX

• Optional SVX adapter plate expands box capacity
• Installs to pre-punched and tapped holes on sides
  of SV1218
• One SVX plate can be added with 16" stud spacing
• Up to two SVX plates can be added with 24" stud
  spacing
• SVX adapter plate accepts all device covers for
  4" and 411/16" boxes

SV1218 mounted to floor track and studs with one
4" square box installed and optional SVX adapter
plate with one box installed
20
Box Support Covers

• Combines a box-to-stud mounting bracket with a
  device cover in one easy-to-use product
• Designed for use with 4" square boxes
• Used with both steel and wood studs
• Cover raised 1/2", 5/8", or 3/4"
• Designed for one or two devices

52CM14-5/8
21
Box-to-Stud Mounting Brackets

• Attaches 4" or 411/16" electrical box to metal
  stud
• Support leg can be attached to stud to eliminate
  movement of box in wall
• Attaches to metal or wood stud using self-tapping
  screws and screw gun or nails
• Single model has capability to mount boxes on
  21/2", 31/2", 4", and 6" stud, which means less
  inventory
• SH4 and SH6 brackets available specifically for
  4" and 6" studs, respectively

SSF-SH2346
22
Adjustable Box Brackets

• Designed for metal studs 16" or 24" on center
• Can also be adjusted for non-standard stud
  spacing
• Adjustable tabs accommodate 11/2" or 21/8" box
  depths
• Enables mounting of multiple boxes
• Installs easily dimples provide a starting
  point for screws

SSF-SG16A