Title: Lexmark Wireless
1Lexmark Wireless Printer Adaptor Instructions
Step 1. For a Mac, go to network preferences/
select built-in-ethernet and click on TCP/IP tab
and annotate your Computers ethernet IP address.
For PC, go to Control Panel/ Network Connections
and select TCP/IP, then annotate IP
address. Step 2. Change the Ethernet IP
Address/subnet/router to 169.254.98.201 /
255.255.0.0/169.254.98.200 Click apply now.
2Lexmark Wireless Printer Adaptor Instructions
Step 3. For a Mac Click on the Proxies Tab,
write down your proxy settings and remove all
proxy selections in the left window under select
a proxy server to configure.
For a PC, change the proxy within
the web browser you will be
using.
3Lexmark Wireless Printer Adaptor Instructions
Step 4. Open internet explorer and type
http//169.254.98.200/ in the address and press
enter. Step 5. Enter admin in user ID and
public in password block and click OK.
4Lexmark Wireless Printer Adaptor Instructions
Step 4. The Admin window appears. Type in the
device Name (location-Room Printer ) I.e.
9858-205K-2. Step 5. Check static for IP
address Mode. Leave the default IP address in the
device. Step 6. Leave Admin and Password
default. Step 7 Click on Save button.
5Lexmark Wireless Printer Adaptor Instructions
Step 8. Click on Reboot window when it
appears Step 9. The reboot in 3 second
window will appear.
6Lexmark Wireless Printer Adaptor Instructions
Step 10. Once the printer adapter completes the
reboot process it will display the Information
page.
7Lexmark Wireless Printer Adaptor Instructions
Step 11. Click on the Security Tab and check
Enable WEP. Step12 Select the WEP Key 1 Step 13
Select Deny encrypted Data Step14 Select Open if
Airspace/Proxim/Dell and Shared if Apple wireless
network. Step 15 Type in the HEX code for the 5
or 13 digit WEP encryption password. Remember
there is 2 hex values for every 1 ASCII code. Go
to http//d21c.com/sookietex/ASCII2HEX.html if
you dont know how to do the conversion Click on
Save
8Lexmark Wireless Printer Adaptor Instructions
Step 16. Click on Reboot window when it
appears Step 17. The reboot in 3 second
window will appear. Step 18 Plug in the
wireless device to the printer with a CAT5e cable
and plug in the Wireless print adapter into the
Printer for power using the Y connector. Step19
Test the printer to be sure it works..