Mimosa18 on PCB (from the chip side)

1
Mimosa18 on PCB (from the chip side)
Pixel(0,0)
Pixel(0,0)
A1
A2
Pixel(255,255) (for all arrays)
A0
A3
Pixel(0,0)
Pixel(0,0)
ERNI connector (opposite side)
cable
2

• 4 matrix of 256256 pixel.
• Self-bias No radiation Tolerant pixel.
• Noise optimized.
• High precision tracking pixel
• This sensors have been designed and fabricated
  for
• this application using AMS 0.35 OPTO process.
• Single sensor consists of 512x512 pixel array
  with
• a pitch of 10 µm, providing an active area of 5x5
  mm2
• fabricated using standard (14 µm thick epitaxy)
• and experimental (20 µm epitaxy)