PowerPoint-presentasjon

1
Introduce
2
CLS
DMX16s 16 Channels DMX Light Mixer
3
CLS makes the Light Equipment more compact
4
Lets take a look at the DMX16
5
First an explanation about the capacityof the
DMX16 mixer.As you kan see it can control 16
channels.It is 4 groups of faders.
Group 1 controls DMX channels 1-4.
Group 2 controls DMX channels 5-8.
Group 3 controls DMX channels 9-12.
Group 4 controls DMX channels 13-16.
It has included a channel 17 for the control of
a smoke machines as well.
6
This is the CLS DMX16Compact Light Mixer
Lets get starting
7
This is the 4 Faders.
8
This is the 4 Flashknobs
9
This is the 4 Function knobs
Group Memory Edit Program
10
The first you see when you connect the power is a
light in the first led.
It tells you that it is in Mix-Mode.
11
Mix-Mode
It is for Mixing and Saving Scenes. The DMX16s
has a limit at 4 Scenes Memory.
12
Mix the lights as you want themon channel 1-4.
13
Turn Off Group 1 by holding in the Grp knob and
press Flash knob 1.
14
Turn On Group 2 by holding in the Grp knob and
press Flash knob 2.
15
You can see the light in the Led 2.
16
Mix the lights as you want themon channel 5-8.
17
Turn Off Group 2 by holding in the Grp knob and
press Flash knob 2.
18
Turn On Group 3 by holding in the Grp knob and
press Flash knob 3.
19
Mix the lights as you want themon channel 9-12.
20
Turn Off Group 3 by holding in the Grp knob and
press Flash knob 3.
21
Turn On Group 4 by holding in the Grp knob and
press Flash knob 4.
22
Mix the lights as you want themon channel 13-16.
23
Save the Scene by holding the Mem
24
and press a Flash knob.
25
Mix the lights as you want them in the next Scene.
26
Save the next Scene.
27
Mix the lights again.
28
Save the next Scene.
29
Mix the lights as you want them in the last Scene.
30
Save the last Scene.
31
Press and Release the Prg knob.
This takes you to Program-Mode.
32
Changes Scenes with Flash knobs.
33
Changes Scenes with Flash knobs.
34
Adjust the Cross Fade Time between the Scenes
with Fader 2.
35
Adjust the Pause length by Fader 1. Less than max
value starts the Chaser.
36
Connect an Audio source to the RCA input.
Sound Chase
37
Activate the Sound input by rising the fader 4.
38
All the leds dim down to half power.
39
Adjust the sensitivity of the sound signal with
the fader 4.
40
Press the EDIT knob in Program Mode function as
Main Flash.
41
Press the MEM knob in Program Mode function as
Blackout.
42
Press the GRP knob in Program Mode function as
Smoke on Ch 17.
43
Press and Release the PRG knob to leave
Program-Mode.
44
Press and Hold the EDIT knob
45
and press a Flash knob to select a program for
Editing.
46
Do the Editing of the Saved Scene..
47
Save the Scene.
48
Change to Easy mode or vica versa.
Unconnect the power.
49
Press and hold Flashknob 1 and Functionknob 4.
Connect the power.
50
Easy Mode.
51
Select Groupe by pressing the Function knobs.
52
Mix the lights the way you want.
53
Store the scene by pressing and holding a
Flashknob for 5 sec.
All the leds will flash
54
Mix a new scene.
55
Store the scene by pressing and holding a
Flashknob for 5 sec.
All the leds will flash
56
Supportphone 47 61341438
isshortfor
Liavegen 45, 2953 Beitostølen, NORWAY Webwww.cls.
no Email office_at_cls.no
57
Good Luck !