Cisco 2960S Switch - PowerPoint PPT Presentation
Title:
Cisco 2960S Switch
Description:
Flux It is located just outside of London, if you have an emergency and need something in a hurry they are available to send equipment over to you the same day. – PowerPoint PPT presentation
Number of Views:32
Title: Cisco 2960S Switch
1
- Cisco 2960S Switch
- Published By
- https//flux-it.co.uk/cisco-catalyst-2960s-switche
s
2
- They tell, you get what you're charging for! The
quality comes with a price in the case of the
bestselling Cisco 2960 switch, a reliable
enterprise-grade Ethernet switch with a lifetime
warranty. Looking about for a used model is
important for a consumer. - You can face a problem while purchasing a used
switch if the vendor has forgotten to reset his
password. Fortunately, it's easy to retrieve the
password on the turn. During the power-on, you
may interrupt the boot sequence, then assign a
new password. - However, if this feature is disabled, only by
agreeing to lose your old configuration will you
be able to recover the password in that case,
the system configuration will be restored to
factory settings. The recovery method for
passwords on Cisco 2960 switches can vary based
on whether the recovery of the password is
allowed or disabled. View Cisco 2960S Switch
3
- On the other hand, the password on your Cisco
2960 switch can be very easily reset to default.
Be mindful that whilst the reset process is very
uninvolved, the default returns to its factory
state all the configurations will be wiped out,
and not just the old password! This procedure
works only if you have the device physically
accessed. Auto setup should be switched off. - First, by unplugging its cord, power off your
Cisco 2960 switch. Press and hold the "Mode"
button while you reconnect the switch to the
power source. On switches from Cisco 2960 this
click is on the front of the unit, on the left
side. - The LED above the button would shift from amber
to green after three seconds, and start blinking.
You should hold the button down until the light
stops blinking. Lets go of the button. - Congratulations, your Cisco 2960 key has just
been activated! Now the password is restored to
factory defaults. Click Cisco C2960S
4
- Obviously, this procedure should only be used if
you don't care about the current configuration,
because you will lose your configuration during
the password recovery process! The original
system is dubbed ".new." - In those cases, this reset procedure can be handy
when you need to move a switch from one network
to another, or when a configuration has become
too complex, and you'd want a new start. - For Cisco 2960 switches the default password is
"cisco" and the username is also "cisco." - Now that you have retrieved your Cisco 2960
switch password successfully, don't leave it too
long as a default. Hackers also know these
default passwords, and may try to use them to
access your device and change the settings of
your network. Change the default password as soon
as possible, to prevent unauthorized access to
your network.More info Cisco C2960S datasheet
5
- Summary
- Flux It is located just outside of London, if you
have an emergency and need something in a hurry
they are available to send equipment over to you
the same day. - Visit this site to learn more
- https//flux-it.co.uk/cisco-catalyst-2960s-switche
Recommended
CrystalGraphics Presentations
