* Locality covered by local tandem

1
SEATTLE LATA 674
Subtending Localities
CUSTOMER NAME and ACNA
BAINBRIDGE ISLAND OLYMPIA
BELFAIR PORT ANGELES
BELLINGHAM PORT LUDLOW
BREMERTON PORT ORCHARD
CENTRALIA PORT TOWNSEND
CHEHALIS ROCHESTER
COLBY SEATTLE
HOODSPORT SEQUIM
JOYCE SHELTON
LACEY SILVERDALE
MERCER ISLAND SUNNYSLOPE
NAPAVINE WINLOCK

Locality covered by local tandem submit
diagram for local tandem, also.
REV. 2/28/08
2
INSTRUCTIONS
SEATTLE LATA 674
CUSTOMER NAME and ACNA

• Use previous slide as a template. Copy all and
  paste to new document
• In top left box enter the full NPA-NXXs
  assigned to the switch and in LATA 674 (on ASR,
  full NPA-NXXs should go in CNPANXX fields on
  Translations Questionnaire.)
• In center left boxes enter LERG switch CLLI (this
  is always the PSL on the ICASR page of the ASR)
  and POI/ACTL CLLI (this is the ACTL on the ICASR
  page). If POI/ACTL CLLI is owned by another OCN,
  LOA must be provided.
• In lower left hexagon enter actual switch CLLI
  from SHA screen in LERG and point code (actual
  switch CLLI is always the CSL and the point code
  is entered in the CSPC field on the TRUNKING form
  of the ASR). LERG switch CLLI and actual switch
  CLLI may be the same if the actual switch is in
  the same LATA and then PSL and CSL would be the
  same CLLI.
• EITHER enter a single line from POI/ACTL CLLI box
  to each access tandem circle and label 2W SPOP
  COMBINED and include quantity of trunks
  requested OR enter 2 lines from POI/ACTL CLLI box
  to each access tandem circle and label top line
  2W SPOP IXC and bottom line 2W SPOP
  Local/Intra and include quantity of trunks
  requested.
• Indicate the QWEST localities where you will be
  conducting business by changing the color to red.
  

Full NPA-NXXs also known as Code Holder,
LERG Assignee, or A Record Holder
REV. 2/28/08
3
SEATTLE LATA 674
Subtending Localities

CUSTOMER NAME and ACNA
AUBURN KENT
BELLEVUE MAPLE VALLEY
BLACK DIAMOND PUYALLUP
BONNEY LAKE RENTON
BUCKLEY ROY
CRYSTAL MOUNTAIN SEATTLE
DES MOINES SUMNER
ENUMCLAW TACOMA
FEDERAL WAY TACOMA WAVERLY
GRAHAM
ISSAQUAH
Locality covered by local tandem submit
diagram for local tandem, also.
REV. 2/28/08
4
INSTRUCTIONS
SEATTLE LATA 674
CUSTOMER NAME and ACNA

• Use previous slide as a template. Copy all and
  paste to new document
• In top left box enter full NPA-NXXs assigned to
  the switch and in LATA 674 (on ASR, full
  NPA-NXXs should go in CNPANXX fields on the
  Translations Questionnaire.)
• In center left boxes enter LERG switch CLLI (this
  is always the PSL on the ICASR page of the ASR)
  and POI/ACTL CLLI (this is the ACTL on the ASR
  page). If POI/ACTL CLLI is owned by another OCN,
  LOA must be provided.
• In lower left hexagon enter actual switch CLLI
  from SHA screen in LERG and point code (actual
  switch CLLI is always the CSL and the point code
  is entered in the CSPC field on the TRUNKING form
  of the ASR). LERG switch CLLI and actual switch
  CLLI may be the same if the actual switch is in
  the same LATA and then PSL and CSL would be the
  same CLLI.
• EITHER enter a single line from POI/ACTL CLLI box
  to each access tandem circle and label 2W SPOP
  COMBINED and include quantity of trunks
  requested OR enter 2 lines from POI/ACTL CLLI box
  to each access tandem circle and label top line
  2W SPOP IXC and bottom line 2W SPOP
  Local/Intra and include quantity of trunks
  requested.
• Indicate the QWEST localities where you will be
  conducting business by changing the color to red.
  

Full NPA-NXXs also known as Code Holder,
LERG Assignee, or A Record Holder
REV. 2/28/08
1
5
SEATTLE LATA 674
Subtending Localities

CUSTOMER NAME and ACNA
ABERDEEN
COPALIS

Locality covered by local tandem submit
diagram for local tandem, also.
REV. 2/28/08
6
INSTRUCTIONS
SEATTLE LATA 674
CUSTOMER NAME and ACNA

• Use previous slide as a template. Copy all and
  paste to new document
• In top left box enter full NPA-NXXs assigned to
  the switch and in LATA 674 (on ASR, full
  NPA-NXXs should go in CNPANXX fields on the
  Translations Questionnaire.)
• In center left boxes enter LERG switch CLLI (this
  is always the PSL on the ICASR page of the ASR)
  and POI/ACTL CLLI (this is the ACTL on the ICASR
  page). If POI/ACTL CLLI is owned by another OCN,
  LOA must be provided.
• In lower left hexagon enter actual switch CLLI
  from SHA screen in LERG and point code (actual
  switch CLLI is always the CSL and the point code
  is entered in the CSPC field on the TRUNKING form
  of the ASR). LERG switch CLLI and actual switch
  CLLI may be the same if the actual switch is in
  the same LATA and then PSL and CSL would be the
  same CLLI.
• EITHER enter a single line from POI/ACTL CLLI box
  to each access tandem circle and label 2W SPOP
  COMBINED and include quantity of trunks
  requested OR enter 2 lines from POI/ACTL CLLI box
  to each access tandem circle and label top line
  2W SPOP IXC and bottom line 2W SPOP
  Local/Intra and include quantity of trunks
  requested.
• Indicate the QWEST localities where you will be
  conducting business (pooling, porting, etc) by
  changing the color to red.

Full NPA-NXXs also known as Code Holder,
LERG Assignee, or A Record Holder
REV. 2/28/08
7
SEATTLE LATA 674
Subtending Localities
CUSTOMER NAME and ACNA
ABERDEEN
COPALIS

REV. 2/28/08
8
INSTRUCTIONS
SEATTLE LATA 674
CUSTOMER NAME and ACNA

• Use previous slide as a template. Copy all and
  paste to new document
• In top left box enter full NPA-NXXs assigned to
  the switch and in the ABERDEEN, WA LOCAL CALLING
  AREA (on ASR, full NPA-NXXs should go in
  CNPANXX fields on Translations Questionnaire.)
• In center left boxes enter LERG switch CLLI (this
  is always the PSL on the ICASR page of the ASR)
  and POI/ACTL CLLI (this is the ACTL on the ICASR
  page). If POI/ACTL CLLI is owned by another OCN,
  LOA must be provided.
• In lower left hexagon enter actual switch CLLI
  from SHA screen in LERG and point code (actual
  switch CLLI is always the CSL and the point code
  is entered in the CSPC field on the TRUNKING form
  of the ASR). LERG switch CLLI and actual switch
  CLLI may be the same if the actual switch is in
  the same LATA and then PSL and CSL would be the
  same CLLI.
• Enter a single line from POI/ACTL CLLI box to
  each local tandem circle and label 2W SPOP
  LOCAL and include quantity of trunks requested.
• Indicate the QWEST localities where you will be
  conducting business by changing the color to red.
  

Full NPA-NXXs also known as Code Holder,
LERG Assignee, or A Record Holder
REV. 2/28/08
9
SEATTLE LATA 674
Subtending Localities
CUSTOMER NAME and ACNA
BELFAIR
BREMERTON
COLBY
PORT ORCHARD
SIlVERDALE
SUNNYSLOPE
REV. 2/28/08
10
INSTRUCTIONS
SEATTLE LATA 674
CUSTOMER NAME and ACNA

• Use previous slide as a template. Copy all and
  paste to new document
• In top left box enter full NPA-NXXs assigned to
  the switch and in the BREMERTON, WA LOCAL CALLING
  AREA (on ASR, full NPA-NXXs should go in
  CNPANXX fields on Translations Questionnaire.)
• In center left boxes enter LERG switch CLLI (this
  is always the PSL on the ICASR page of the ASR)
  and POI/ACTL CLLI (this is the ACTL on the ICASR
  page). If POI/ACTL CLLI is owned by another OCN,
  LOA must be provided.
• In lower left hexagon enter actual switch CLLI
  from SHA screen in LERG and point code (actual
  switch CLLI is always the CSL and the point code
  is entered in the CSPC field on the TRUNKING form
  of the ASR). LERG switch CLLI and actual switch
  CLLI may be the same if the actual switch is in
  the same LATA and then PSL and CSL would be the
  same CLLI.
• Enter a single line from POI/ACTL CLLI box to
  each local tandem circle and label 2W SPOP
  LOCAL and include quantity of trunks requested.
• Indicate the QWEST localities where you will be
  conducting business by changing the color to red.
  

Full NPA-NXXs also known as Code Holder,
LERG Assignee, or A Record Holder
REV. 2/28/08
11
SEATTLE LATA 674
Subtending Localities
CUSTOMER NAME and ACNA
CENTRALIA
CHEHALIS
NAPAVINE
WINLOCK
REV. 10/10/07
12
INSTRUCTIONS
SEATTLE LATA 674
CUSTOMER NAME and ACNA

• Use slide sixteen as a template. Copy all and
  paste to new document
• In top left box enter the LRN, full NPA-NXXs
  and thousands blocks assigned to the switch and
  in the CHEHALIS, WA LOCAL CALLING AREA (on ASR,
  LRN should go in LRNG field on ICTQ6 if not in
  CHEHALIS, WA LOCAL CALLING AREA, full NPA-NXXs
  should go in CNPANXX fields on ICTQ6. If no full
  NPA-NXXs, then use the LRN NPA NXX to fulfill
  CNPANXX requirement)
• In center left boxes enter LERG switch CLLI (this
  is always the PSL on the ICASR page of the ASR)
  and POI/ACTL CLLI (this is the ACTL on the ICASR
  page). If POI/ACTL CLLI is owned by another OCN,
  LOA must be provided.
• In lower left hexagon enter actual switch CLLI
  from SHA screen in LERG and point code (actual
  switch CLLI is always the CSL and the point code
  is entered in the CSPC field on the TRUNKING form
  of the ASR). LERG switch CLLI and actual switch
  CLLI may be the same if the actual switch is in
  the same LATA and then PSL and CSL would be the
  same CLLI.
• Enter a single line from POI/ACTL CLLI box to
  each local tandem circle and label 2W SPOP
  LOCAL and include quantity of trunks requested.
• Continued on next page

REV. 10/10/07
13
INSTRUCTIONS
SEATTLE LATA 674
CUSTOMER NAME and ACNA

• Indicate the QWEST localities where you will be
  conducting business (pooling, porting, etc) by
  changing the color to red.

Full NPA-NXXs also known as Code Holder,
LERG Assignee, or A Record Holder
REV. 10/10/07
14
SEATTLE LATA 674
Subtending Localities
CUSTOMER NAME and ACNA
PORT LUDLOW
PORT TOWNSEND
REV. 10/10/07
15
INSTRUCTIONS
SEATTLE LATA 674
CUSTOMER NAME and ACNA

• Use slide nineteen as a template. Copy all and
  paste to new document
• In top left box enter the LRN, full NPA-NXXs
  and thousands blocks assigned to the switch and
  in the PORT TOWNSEND, WA LOCAL CALLING AREA (on
  ASR, LRN should go in LRNG field on ICTQ6 if not
  in PORT TOWNSEND, WA LOCAL CALLING AREA, full
  NPA-NXXs should go in CNPANXX fields on ICTQ6.
  If no full NPA-NXXs, then use the LRN NPA NXX to
  fulfill CNPANXX requirement)
• In center left boxes enter LERG switch CLLI (this
  is always the PSL on the ICASR page of the ASR)
  and POI/ACTL CLLI (this is the ACTL on the ICASR
  page). If POI/ACTL CLLI is owned by another OCN,
  LOA must be provided.
• In lower left hexagon enter actual switch CLLI
  from SHA screen in LERG and point code (actual
  switch CLLI is always the CSL and the point code
  is entered in the CSPC field on the TRUNKING form
  of the ASR). LERG switch CLLI and actual switch
  CLLI may be the same if the actual switch is in
  the same LATA and then PSL and CSL would be the
  same CLLI.
• Enter a single line from POI/ACTL CLLI box to
  each local tandem circle and label 2W SPOP
  LOCAL and include quantity of trunks requested.
• Continued on next page

REV. 10/10/07
16
INSTRUCTIONS
SEATTLE LATA 674
CUSTOMER NAME and ACNA

• Indicate the QWEST localities where you will be
  conducting business (pooling, porting, etc) by
  changing the color to red.

Full NPA-NXXs also known as Code Holder,
LERG Assignee, or A Record Holder
REV. 10/10/07
17
SEATTLE LATA 674
Subtending Localities
CUSTOMER NAME and ACNA
AUBURN
BAINBRIDGE ISLAND
BELLEVUE
DES MOINES
FEDERAL WAY
ISSAQUAH
KENT
MAPLE VALLEY
MERCER ISLAND
RENTON
SEATTLE
REV. 10/10/07
18
INSTRUCTIONS
SEATTLE LATA 674
CUSTOMER NAME and ACNA

• Use slide twenty-two as a template. Copy all and
  paste to new document
• In top left box enter the LRN, full NPA-NXXs
  and thousands blocks assigned to the switch and
  in the SEATTLE, WA LOCAL CALLING AREA (on ASR,
  LRN should go in LRNG field on ICTQ6 if not in
  SEATTLE, WA LOCAL CALLING AREA, full NPA-NXXs
  should go in CNPANXX fields on ICTQ6. If no full
  NPA-NXXs, then use the LRN NPA NXX to fulfill
  CNPANXX requirement)
• In center left boxes enter LERG switch CLLI (this
  is always the PSL on the ICASR page of the ASR)
  and POI/ACTL CLLI (this is the ACTL on the ICASR
  page). If POI/ACTL CLLI is owned by another OCN,
  LOA must be provided.
• In lower left hexagon enter actual switch CLLI
  from SHA screen in LERG and point code (actual
  switch CLLI is always the CSL and the point code
  is entered in the CSPC field on the TRUNKING form
  of the ASR). LERG switch CLLI and actual switch
  CLLI may be the same if the actual switch is in
  the same LATA and then PSL and CSL would be the
  same CLLI.
• Enter a single line from POI/ACTL CLLI box to
  each local tandem circle and label 2W SPOP
  LOCAL and include quantity of trunks requested.
• Continued on next page

REV. 10/10/07
19
INSTRUCTIONS
SEATTLE LATA 674
CUSTOMER NAME and ACNA

• Indicate the QWEST localities where you will be
  conducting business (pooling, porting, etc) by
  changing the color to red.

Full NPA-NXXs also known as Code Holder,
LERG Assignee, or A Record Holder
REV. 10/10/07
20
SEATTLE LATA 674
Subtending Localities
CUSTOMER NAME and ACNA
BONNEY LAKE
GRAHAM
PUYALLUP
ROY
SUMNER
TACOMA
TACOMA WAVERLY
REV. 10/10/07
21
INSTRUCTIONS
SEATTLE LATA 674
CUSTOMER NAME and ACNA

• Use slide twenty-five as a template. Copy all
  and paste to new document
• In top left box enter the LRN, full NPA-NXXs
  and thousands blocks assigned to the switch and
  in the TACOMA, WA LOCAL CALLING AREA (on ASR,
  LRN should go in LRNG field on ICTQ6 if not in
  TACOMA, WA LOCAL CALLING AREA, full NPA-NXXs
  should go in CNPANXX fields on ICTQ6. If no full
  NPA-NXXs, then use the LRN NPA NXX to fulfill
  CNPANXX requirement)
• In center left boxes enter LERG switch CLLI (this
  is always the PSL on the ICASR page of the ASR)
  and POI/ACTL CLLI (this is the ACTL on the ICASR
  page). If POI/ACTL CLLI is owned by another OCN,
  LOA must be provided.
• In lower left hexagon enter actual switch CLLI
  from SHA screen in LERG and point code (actual
  switch CLLI is always the CSL and the point code
  is entered in the CSPC field on the TRUNKING form
  of the ASR). LERG switch CLLI and actual switch
  CLLI may be the same if the actual switch is in
  the same LATA and then PSL and CSL would be the
  same CLLI.
• Enter a single line from POI/ACTL CLLI box to
  each local tandem circle and label 2W SPOP
  LOCAL and include quantity of trunks requested.
• Continued on next page

REV. 10/10/07
22
INSTRUCTIONS
SEATTLE LATA 674
CUSTOMER NAME and ACNA

• Indicate the QWEST localities where you will be
  conducting business (pooling, porting, etc) by
  changing the color to red.

Full NPA-NXXs also known as Code Holder,
LERG Assignee, or A Record Holder
REV. 10/10/07
23
SEATTLE LATA 674
Subtending Localities
CUSTOMER NAME and ACNA
LACEY
OLYMPIA
ROCHESTER
SHELTON
REV. 10/10/07
24
INSTRUCTIONS
SEATTLE LATA 674
CUSTOMER NAME and ACNA

• Use slide twenty-eight as a template. Copy all
  and paste to new document
• In top left box enter the LRN, full NPA-NXXs
  and thousands blocks assigned to the switch and
  in the OLYMPIA, WA LOCAL CALLING AREA (on ASR,
  LRN should go in LRNG field on ICTQ6 if not in
  OLYMPIA, WA LOCAL CALLING AREA, full NPA-NXXs
  should go in CNPANXX fields on ICTQ6. If no full
  NPA-NXXs, then use the LRN NPA NXX to fulfill
  CNPANXX requirement)
• In center left boxes enter LERG switch CLLI (this
  is always the PSL on the ICASR page of the ASR)
  and POI/ACTL CLLI (this is the ACTL on the ICASR
  page). If POI/ACTL CLLI is owned by another OCN,
  LOA must be provided.
• In lower left hexagon enter actual switch CLLI
  from SHA screen in LERG and point code (actual
  switch CLLI is always the CSL and the point code
  is entered in the CSPC field on the TRUNKING form
  of the ASR). LERG switch CLLI and actual switch
  CLLI may be the same if the actual switch is in
  the same LATA and then PSL and CSL would be the
  same CLLI.
• Enter a single line from POI/ACTL CLLI box to
  each local tandem circle and label 2W SPOP
  LOCAL and include quantity of trunks requested.
• Continued on next page

REV. 10/10/07
25
INSTRUCTIONS
SEATTLE LATA 674
CUSTOMER NAME and ACNA

• Indicate the QWEST localities where you will be
  conducting business (pooling, porting, etc) by
  changing the color to red.

Full NPA-NXXs also known as Code Holder,
LERG Assignee, or A Record Holder
REV. 10/10/07
26
SEATTLE LATA 674
Subtending Localities
CUSTOMER NAME and ACNA
PORT ANGELES
SEQUIM
REV. 10/10/07
27
INSTRUCTIONS
SEATTLE LATA 674
CUSTOMER NAME and ACNA

• Use slide twenty-eight as a template. Copy all
  and paste to new document
• In top left box enter the LRN, full NPA-NXXs
  and thousands blocks assigned to the switch and
  in the PORT ANGELES, WA LOCAL CALLING AREA (on
  ASR, LRN should go in LRNG field on ICTQ6 if not
  in PORT ANGELES, WA LOCAL CALLING AREA, full
  NPA-NXXs should go in CNPANXX fields on ICTQ6.
  If no full NPA-NXXs, then use the LRN NPA NXX to
  fulfill CNPANXX requirement)
• In center left boxes enter LERG switch CLLI (this
  is always the PSL on the ICASR page of the ASR)
  and POI/ACTL CLLI (this is the ACTL on the ICASR
  page). If POI/ACTL CLLI is owned by another OCN,
  LOA must be provided.
• In lower left hexagon enter actual switch CLLI
  from SHA screen in LERG and point code (actual
  switch CLLI is always the CSL and the point code
  is entered in the CSPC field on the TRUNKING form
  of the ASR). LERG switch CLLI and actual switch
  CLLI may be the same if the actual switch is in
  the same LATA and then PSL and CSL would be the
  same CLLI.
• Enter a single line from POI/ACTL CLLI box to
  each local tandem circle and label 2W SPOP
  LOCAL and include quantity of trunks requested.
• Continued on next page

REV. 10/10/07
28
INSTRUCTIONS
SEATTLE LATA 674
CUSTOMER NAME and ACNA

• Indicate the QWEST localities where you will be
  conducting business (pooling, porting, etc) by
  changing the color to red.

Full NPA-NXXs also known as Code Holder,
LERG Assignee, or A Record Holder
REV. 10/10/07