PACKUPPEB, PHASE KIT MANAGEMENT

1
PACK-UP/PEB, PHASE KIT MANAGEMENT

• Enabling Objectives
• 2.60 DESCRIBE PACK-UP/PEB, PHASE KIT MANAGEMENT

2
PACK-UP/PEB, PHASE KIT MANAGEMENT

• The Pre-expended Bin Unit (ASD sites only) is
  responsible for establishing and maintaining the
  inventories of consumable pre-expended bins (PEB)
  and consumable packups. These PEBs and packups
  and their inventories are maintained in Optimized
  IMA.

3
PACK-UP/PEB, PHASE KIT MANAGEMENT

• PACK-UP MANAGEMENT

4
PACK-UP/PEB, PHASE KIT MANAGEMENT

• Purpose
• Transfers an RFI asset from the Supply
  Officer to a specific ORG for detachment
  purposes.
• System Action
• Generates an X24C Doc Id from RSUPPLY to
  NALCOMIS.
• Decrements RFI quantity
• Increments Pack up Deployed

5
PACK-UP/PEB, PHASE KIT MANAGEMENT

• PACK-UP PROCESSING

6
PACK-UP MANAGEMENT

• Packup Processing is now done using RSUPPLY.
  This is known as a Support Package. This is
  primarily done at ASD sites to support squadron
  detachments where supply support is almost
  non-existent such as Fallon Nevada. In some
  cases, such as support for a C2 (COD)
  detachments, support packages can be created at
  shipboard sites as well. While the functionality
  still exists to some extent in NALCOMIS, it is
  for local purposes only.

7
(No Transcript)
8
(No Transcript)
9
PACK-UP MANAGEMENT

• Support Package processing is taught in depth in
  The RSUP Force Level (NEC 2828) class.

10
PEB (Pre-Ex Bin Management)
11
PEB (Pre-Ex Bin Management)

• Pre Expendable Bins are maintained at ASD sites
  to provide high usage low cost consumables, such
  as washers, o-rings, cotter pins, etc.
• MSP storerooms are used vice Pre Expendable Bins
  on board ship to fill requests for this material.
  
• This area of NALCOMIS IMA is only used by ASD
  sites.

12
(No Transcript)
13
(No Transcript)
14
(No Transcript)
15
Click save
16
This indicator must be checked or NALCOMIS will
generate error message during validation
17
Phase Kit Management
18
Phase Kit Management

• Phase kits contain inventories of consumable bit
  and piece parts that are needed to perform
  specific maintenance functions. By creating kits
  of bit/pieces, maintenance personnel can request
  the kit to perform their function, instead of
  requesting each part separately.

19
Phase Kit Management

• A phase kit is made up of a master phase kit and
  its inventory. The master phase kit is the
  "container" LICN that the inventories are
  assembled under. Inventories are the related bits
  and pieces that are assembled for the specific
  function or functions that the kit will support.
• Phase kits must first be established in the
  system before managing and issuing

20
Phase Kit Management

• Phase inspections are performed on Aircraft based
  on flight hours.
• These Kits are pre-assembled in S6 or ASD to
  prevent requisitioning of multiple consumable
  items during the phase inspection.
• Once the items are identified, they are placed
  usually in paper bags and annotated with the LICN
  of the kit and the individual NIINS of the
  consumables that are in the bag.
• When a squadron requires the kit to complete a
  phase inspection they requisition the kit using
  the LICN of the kit.

21
Phase Kit Management

• The master phase kit LICN must be flagged as a
  phase kit and the supply products indicator (SPI)
  must NOT be set on the NIIN record.

22
If the stock number is a master phase kit or if
it is an inventory item or a bit/piece part for a
phase kit, select the Phase Kit check box.
23
(No Transcript)
24
(No Transcript)
25
(No Transcript)
26
Click yes if you want to add items for the phase
kit at that time. You can also add them later.
27
(No Transcript)
28
After entering all applicable data, click apply.
29
You can add another record or do it another time.
30
Phase Kit Management

• List Phase Kits

31
(No Transcript)
32
(No Transcript)
33
Phase Kit Management

• Replenishment

34
Phase Kit Management

• As Phase kits are issued and on hand qty
  decreases, Master Phase kits can be replenished,
  thus requisitioning the bits and pieces that are
  required for the Master Phase kits.

35
Notice that the due quantity is 0 and there is no
O/H quantity
At this point the Replenish button can be
accessed and is used to replenish items for phase
kits
36
Phase Kit Management

• Once the replenish button is pressed it places
  the request in the batch job que for release.
• Once released it auto assigns a DDSN to each of
  the bit piece parts required for the phase kits.

37
(No Transcript)
38
(No Transcript)
39
(No Transcript)
40
Notice that the Due quantity has been incremented
This button will allow an even more in-depth
review of items that are due
41
(No Transcript)
42
(No Transcript)
43
Phase Kit Management

• Individual Bit Piece parts can also be viewed
  with the Bit Piece function.
• This area will only populate when there are bit
  piece parts on order

44
(No Transcript)
45
(No Transcript)
46
(No Transcript)
47
(No Transcript)
48
REVIEW AND SUMMARY

• DESCRIBED PACK-UP MANAGEMENT

49
ANY QUESTIONS ???