MEC1011 Fall05

1
MEC1011 Fall05 Assignment 2 Due at the end of
our week 2 meeting Reference Chapter 2 Part
Modeling 1 (pp 25-134)

• Create a new folder using your full_name and
  located in V/MEC/1011/Fall_05/Assignment2/TxA.
  Make the project file reflecting the assignment
  (A2). See Page 2 for more detail
• Create a part or parts that demonstrate the
  following features
• Name your files to reflect the skills
  demonstrated ie (Revolve_Shell.ipt)
• Revolve (Be sure to use a centerline designation
  for the center of the revolution)
• Chamfer
• Coil
• Thread
• Extrude
• Fillet
• Emboss
• Shell
• Hole (use feature panel bar to locate) (Do not
  use sketch)
• Circular Pattern (the feature not the sketch
  tool)
• Rectangular Pattern
• Derived component
• Start a new part and name it A2-13 and insert the
  AutoCad file that is in V/MEC/1011/Fall_05/Assign
  ment2/ACAD Drawings. (The Drawing Number will be
  assigned to you by the instructor)
• Rotate the entire shape 90 degrees
• Move one of the holes to a different location.
• Extrude the revised shape to 1.625.

2
INVENTOR PROJECT MANAGEMENT
THE key to success in Inventor is to follow the
rules. Rule 1 Understand the file
extensions 1. .ipj (project file) (creates the
folder) 2. .ipt (part file) 3. .iam (assembly
file) 4. .ipn (presentation file) 5. .idv
(design file) 6. .idw (drawing file) 7.
.dwf (web file) 8. .dwg (autocad file) Rule
2 Create and faithfully use PROJECT FILES.
(ipj) Make sure you are using the appropriate
PROJECT FILE every time you start up Inventor.
You can have ONLY 1 project open per session of
Inventor. Do NOT use one PROJECT FILE for
multiple assignments. Rule 3 Work on V Save
multiple copies elsewhere. Initially create and
save your files in the V/MEC/1011/Fall_05/Assign
ment_TxA folder COPY this folder to you H drive
or alternative drive. Do this at the end of
every session.