Title: Why Are Cold Saw Flying Cut Off So Popular?
1SRET Completed the Commissioning of Ø219 Tube
Mill Retrofit for Hengshui Jinghua
2Steel Pipe Co., Ltd is one of the biggest tube
and pipe manufacturer in China with employees of
1800. It has 15 ERW production lines with annual
output of 1.6 millions of tons of ERW steel pipes
ranging from 21.3 to 325 mm diameter. Its tube
and pipe are sold thru over 60 countries for some
rough applications like oil gas, chemical and
power industry.
3The company is honored to be the first-class
supplier for China National Petroleum Group and
Petro China Group. Steel Pipe has been long-term
customer with SRET Equipment for decades. The
company has many sets of machines made .
4SRET Equipment applied to its several lines in
its daily operation. SRET Equipment machines
performance and extensive customer service earn a
complete customer satisfaction and trust. In
2015, Steel Pipe came to SRET Equipment again for
help upgrade its existing 219 ERW tube mill line.
5By upgrading, the customer wants to increase its
mill speed, to improve the pipe cutting edge for
eliminating end facing process, and to be able to
process thicker material as well.
6SRET Equipment provide the solution consisting of
entire entry line section including uncoiler,
leveling machine, shear end welder, horizontal
spiral accumulator, and plus milling type orbital
flying cut off cold saw, cold saw flying cut off
that not just meet, but exceed the customers
expectations.
7One big challenge facing SRET Equipment is that
the customer requested the shortest lead time
possible and allowed for just one month of time
window to complete the installations and
commissioning for all the machines, to minimize
the impact of existing line stoppage.
8it turned out that it took SRET Equipment only 3
month to deliver all these machines and had the
installation and commissioning completed within
less than one month. The job was done in Feb,
2015.
9Customer values delivered by SRET Equipment
include Process a broader range of material,
thickness up to 12 mm from previous 8 mm Higher
productivity, mill speed increased to 40
m/min Increased automation level and reduced
manpower required, number of operators needed for
entry line down to 1 from previous 4 Eliminate
the requirements for end facing process for a big
cost saving, with burr-free cutting achieved by
milling type orbital flying cutoff cold saw Short
lead time and commissioning time ensure a minimum
financial impact of existing line stoppage
10Shenyang SRET Equipment Co., Ltd Phone 86
24 24502154 Fax 86 24 24538186 Email cust
omer_at_sret-equipment.com Website
www.sret-equipment.com