Advantage of Sandblasting

1
Advantage of Sandblasting
www.shotblasting.org.in
2
Content
what is sandblasting?
Wide Applications
Covert Old Into New
Results Are Just Perfect
3
What is sandblasting?
Sandblasting is basically used to clean the
surface of any material, mainly for the metallic
surface. It is one of the most efficient and
quick method which uses compressed air to blast
fine sand through a nozzle to shape and smooth
surface of any foreign material. It is well
suited for the removal of rust which causes
property damage.
4
(No Transcript)
5
Easy Process
The process of Sand blasting is quite easy. You
do require to a hire a professional since you
dont know the precautions to be taken
Less machinery
This process just requires a compressor, a
blasting pot and a nozzle. You can select the
desired mixture as per the instruments used for
cleaning.
6
Wide applications
There are lots of applications of sand blasting
in every area. Whatever be the type of industry
you own, you require the help of this process to
get rid of the unwanted deposits.
Perfect Cleaning
This process can be used for every material for
the purpose of cleaning. Sand blasting can even
be used for delicate materials, but you have to
have proper knowledge of the type of materials to
be used in the blast pot.
7
Wide Applications
Irrespective of the industry that you work in,
the process of sandblasting can be utilized for
cleaning purposes in every industry. Besides
this, the process of sandblasting makes use of
substances like sodium bicarbonate, which has
absolutely no harmful effect on our health even
if inhaled in large quantities. This makes it
even safer for use in almost all the industries,
irrespective of the type of work that is being
done. This procedure can be used by those
industries as well who are very conscious about
the environment, since the substances used and
released during the cleaning process do not cause
any damage to the environment.
8
Covert Old Into New
This has been mentioned before, the process of
sandblasting helps in converting the damaged
surfaces back to their original look. Thus, if
you have a surface which is covered in old paint
or casting materials, the same can be easily
cleaned without any scratch using this cleaning
technique. Once the sandblasting process is
complete on this surface, not only would the
stains be gone, but the surface will appear to be
brand new, just like it was right before the
stains were made
9
Profiling Of Metallic Surfaces
There are many metallic surfaces which need to be
profiled before any sort of coating can be
applied to them. Without this profiling, the
subsequent coating with not adhere to the
surface. This profile can be easily created with
the use of sandblasting. Through the process of
sandblasting, the exact profile needed for the
coating process can be easily accomplished.
10
Results Are Just Perfect
If people or companies with good knowledge about
the process of sandblasting are hired for the
job, then whether you need to get delicate
cleaning work done through this process, or a
difficult fire damage stain removed from a hard
surface, everything can be easily and perfectly
cleaned through sandblasting. The results
obtained through the use of sandblasting process
are usually the best. Besides the removal of
stains and dirt, this procedure is also often
used for paint removal as well.
11
Plot No-53, Sec-27a Faridabad -121003
91-9811083740
rajansikka64_at_yahoo.com
www.shotblasting.org.in