advancetech05

1
flux cleaner
2
Flux cleaner
3
Triggered Rosin Set off rosin fluxes are the next
action up from the slightly activated rosins. The
included power in the activated rosin can
eliminate oxides that no-clean and slightly
activated fluxes can not. The residue left from
turning on rosins may be severe, so take a look
at the data sheet or talk with the manufacturer
to see if your specific flux cleaner calls for to
be cleaned the board after soldering.   Inorganic
Acid Not natural acid fluxes are additionally
truly strong, finest to help solder difficult
steels. This can be extremely useful for greatly
oxidized steels, or for products that have a low
solder ability. Once again, a harmful deposit is
left, so a warm water or solvent rinse is
required to protect your board.   Water
Soluble This flux cleaner is made to be quickly
cleaned, specifically throughout wave soldering
processes. Water soluble fluxes are a few of the
greatest, and will most definitely rust your PCB
if left on, so ensure to completely clean any
kind of deposits left by this flux cleaner.
4
Contact us
Address 709-710, GD-ITL Towers, B-8, Netaji
Subhash Place, Pitampura, New Delhi,
India Emailajay_at_advinancetech.co.in Phone95995
92691 Website https//www.advancetech.co.in/pro
ducts/techspray-usa/flux-cleaner/1621-g