How to minimize network latency with Ethernet switches?

1
How to minimize network latency with Ethernet
switches?
Different techniques are used to reduce network
latency with Ethernet switches. They are as
follows Extend Network Capacity One of the
simplest and most efficient techniques to reduce
latency and collision is to provide the necessary
capacity using your Ethernet switch. Check if
the switch can provide you with a function to
expand the network capacity. Non-packet loss
Ethernet switches help improve network
performance. Link Aggregation Control Protocol,
abbreviated as LACP, is a standard feature that
helps improve network performance through port
binding. Use VLANs to segment your network
Ethernet switches with virtual local area
network or VLAN (set of end stations)
capabilities can easily send network traffic to
its destination based on port, dynamic VLAN
assignment, MAC address, and more . VLAN supports
Layer 2 and Layer 3 Ethernet switches that offer
both routing and bridging benefits. Use cutoff
technology This technique is for the packet
switching system, with the aim of minimizing
network latencies. Cutoff switching reduces
network latency using the switch when an Ethernet
switch begins to forward the packet before the
entire packet has been received, as soon as the
final address is processed. But this technology
only works well with ports of the same
speed. Source https//www.versitron.com/blog/wha
t-is-network-latency- and-how-to-minimize-it