Section 7 Contamination - PowerPoint PPT Presentation

1 / 4
About This Presentation
Title:

Section 7 Contamination

Description:

Plan to measure quantity, composition of products outgassed ... TQCM's to measure outgassing rates throughout test. Scavenger plates ... damaging ... – PowerPoint PPT presentation

Number of Views:17
Avg rating:3.0/5.0
Slides: 5
Provided by: drmichaelw3
Category:

less

Transcript and Presenter's Notes

Title: Section 7 Contamination


1
Section 7 Contamination
. . . Dr. Michael Woronowicz Swales Aerospace
2
Thermal Vacuum Parameters
  • Plan to measure quantity, composition of products
    outgassed from within instruments
  • TQCMs to measure outgassing rates throughout
    test
  • Scavenger plates mounted to collect products
  • Devices to be mounted to side of S/C
  • Reduces risk of damaging instruments
  • Single-sheet curtain of clear Kapton hung from
    nadir deck heater panels
  • Together, form duct to isolate ALI, Hyperion
    outgassing from S/C

3
Thermal Vacuum Parameters (continued)
  • Advanced Land Imager
  • TQCM operating at FPA temperature
  • Scavenger plate operating at -90 C
  • Hyperion
  • TQCM, scavenger plate both operate at -90 C
  • Scavenger plates operate at -90 C
  • Same as shroud temperature
  • Colder scavenger plates collect reflected
    material from S/C
  • Cannot distinguish these materials from
    instrument outgassing
  • Hyperion cryocooler operates at 150 K
  • Will condense outgassed, desorbed water vapor
  • Would overwhelm TQCM measurements, scavenger
    plates when operating with warmer shroud

4
GSE Bakeout Status (as of 6/7/00)
Write a Comment
User Comments (0)
About PowerShow.com