Dia 1

1
Deca products GLASSETCH
How to etch glass
In a simple way
In a safe way
On a low cost basis
In an extremely good quality
Real chemical etching, not just another
etch imitation
2
1. Direct printing
Deca products GLASSETCH
Apply the Glassetch by screen printing.
Let react for five minutes.
Wash the Glassetch off with water.
The glass is etched.
3
1. Direct printing
Deca products GLASSETCH
For a quick and simple etching.

Easy process, few preparation.

Short process, one single movement.

Low cost.
-
Low or medium sharpness.
-
Acid haze is not excluded.
4
Deca products GLASSETCH
2. Indirect printing
Print the inversed image with Glassetch Resist
Ink.
Cover the parts you do not want to be etched.
Control the image, and let the ink dry.
Apply Glassetch or Brush Cream, with screen,
roller or brush.
Let react for 5 minutes.
Rinse Etching paste off with waterWash off Blue
Ink with solvent.
Ready the glass is etched.
5
Deca products GLASSETCH
2. Indirect printing
For sharp details and halftones
-
Takes a little more time.

Very sharp details can be reproduced.
Even halftones can be realised.


No acid haze problems.

More appropriate for serial production.
6
Deca products GLASSETCH
3. protection of matted glass
For outdoor use keep the matted effect, even
when the glass is wet.
No more finger prints on the matted glass.
No dust of dirt sticking on the matted glass.
For shower cabins no more see through
use GLASSETCH COVER
7
Deca products GLASSETCH
3. How to use Glassetch Cover
Clean and degrease the glass.
Apply Glassetch Cover in an equal way, by
spraying, rolling or with a cloth.
Allow Glassetch Cover to dry. Remove superfluous
product.
Ready !
8
Deca products GLASSETCH
4. Some ideas for Glassetch
Glass doors
Architecture
Windows
Security codes on car glasses
Glass clocks
Photo frames
Bottle decoration
Logo on corporate gifts
Furniture
Shower cabins
Make glass writable by matting
Glassetch Resist can be printed by pad printing.
Glassetch Brush Cream can be applied by hand
brush.
Halftones on mirrors give splendid effects.
Glassetch can be used on ceramics and on some
metals.
Etched glass gives a much better adhesion for
glass inks.
Plotted paper can be used as inverted image.
9
Deca products GLASSETCH
5. Safety and health
Glass can only be etched with acids and bifluoric
salts.
GLASSETCH contains these products.
Therefore it is to be
considered as a hazardous product.
GLASSETCH is less dangerous than the pure etching
acids, as normally used in the glass industry.
But
No splashing or dripping, because of the high
viscosity paste.
Short contact with the skin is harmless.
If you follow up a few basic safety
instructions, GLASSETCH allows you to work
without any danger.
10
Deca products GLASSETCH
6. Environment
In order to produce in an environment friendly
way
Acids can be neutralised.
Bifluoric salts can be filtered out of the water.
We have the technology to neutralise and filter
the waste water.
A simple and budget friendly filtration system
makes working with Glassetch harmless.
11
Deca products GLASSETCH
Have a lot of inspiration,
Use our technology to create,
Good luck, with Deca Products GLASSETCH.
Real chemical etching, not just another
etch imitation
Thank you