Goal: To understand the basics of capacitors - PowerPoint PPT Presentation

About This Presentation
Title:

Goal: To understand the basics of capacitors

Description:

Goal: To understand the basics of capacitors Objectives: To learn about what capacitors are To learn about the Electric fields inside a capacitor – PowerPoint PPT presentation

Number of Views:39
Avg rating:3.0/5.0
Slides: 21
Provided by: DrEdwar7
Category:

less

Transcript and Presenter's Notes

Title: Goal: To understand the basics of capacitors


1
Goal To understand the basics of capacitors
  • Objectives
  • To learn about what capacitors are
  • To learn about the Electric fields inside a
    capacitor
  • To learn about Capacitance
  • To understand how a Dielectric can make a better
    Capacitor
  • To be able to calculate the Energy stored inside
    a capacitor

2
What are capacitors?
  • Much like we build reservoirs to hold water you
    can build a device which holds onto charge.
  • These are capacitors.
  • They work by separating and charges so that
    you have an electric field between them.
  • Most commonly this is done on a pair of plates
    which are parallel to each other.

3
Electric field inside a capacitor
  • The electric field is usually a constant between
    the plates of the capacitor.
  • This makes the math fairly straight forward.
  • The voltage across the capacitor is therefore V
    E d where d is the separation between the plates.
  • Now we just need to find E.

4
Electric Field
  • Each plate will have some amount of charge spread
    out over some area.
  • This creates a density of charge which is denoted
    by the symbol s
  • s Q / A where Q is the total charge and A is
    the area
  • And E 4p k s
  • Also, E s / e0 where e0 is a constant (called
    the permittivity of free space)
  • e0 8.85 10-12 C2/(Nm2)

5
Capacitance
  • Capacitance is a measure of how much charge you
    can store based on an electrical potential
    difference.
  • Basically it is a measure of how effectively you
    can store charge.
  • The equation is
  • Q C V where Q is the charge, C is the
    capacitance (not to be confused with units of
    charge), and V is the voltage (not to be confused
    with a velocity)
  • C is in units of Farads (F).

6
Quick question
  • You have a 10 F capacitor hooked up to a 8 V
    battery. What is the maximum charge that you can
    hold on the capacitor?

7
Quick question
  • You have a 10 F capacitor hooked up to a 8 V
    battery. What is the maximum charge that you can
    hold on the capacitor?
  • Q C V (to be done on board)

8
Finding the Capacitance of a Capacitor
  • For this we have a few steps
  • E s / e0
  • Since s Q/A, E Q / (e0 A)
  • V E d, so V Q d / (e0 A)
  • Or, just moving things around
  • Q/V e0 A / d
  • Since C Q / V e0 A / d

9
Wake up time!
  • Sample problem.
  • Two parallel plates are separated by 0.01 m.
  • The plates are 0.1 m wide and 1 m long.
  • If you add 5 C of charge to this plate then find
  • A) the Electric field between the plates.
  • B) The Capacitance of the plate.
  • C) The voltage across the 2 plates.

10
Wake up time!
  • Two parallel plates are separated by 0.01 m.
  • The plates are 0.1 m wide and 1 m long.
  • If you add 5 C of charge to this plate then find
  • A) the Electric field between the plates.
  • E s / (e0 )
  • s Q / A, Q 5 C, and A 0.1 m 1 m 0.1 m2
  • So, s (Done on Board)
  • And E (Done on Board)

11
Wake up time!
  • Two parallel plates are separated by 0.01 m.
  • The plates are 0.1 m wide and 1 m long.
  • If you add 5 C of charge to this plate then find
  • B) The Capacitance of the plate.
  • C A e0 / d (Done on Board)

12
Wake up time!
  • Two parallel plates are separated by 0.01 m.
  • The plates are 0.1 m wide and 1 m long.
  • If you add 5 C of charge to this plate then find
  • C) The voltage across the 2 plates.
  • V Q / C or E d
  • Lets use E d

13
Limits
  • There are limits to what you can do with a normal
    capacitor (just like limits to what you can do
    with a dam).
  • Eventually the charges will overflow the
    capacitor and will leak out.
  • How would you solve this problem?

14
Fill it with substance
  • One solution is to place a material in between
    the plates which prohibit the flow of charge (an
    insulator).
  • This allows you to build up more charge.
  • A substance that allows you to do this is called
    a dielectric.

15
Dielectrics
  • The dielectric has the effect of increasing the
    capacitance.
  • The capacitance is increased by a factor of the
    dielectric constant of the material (?).
  • So, C ? A / (4p k d) or ? e0 A / d

16
Lightning!
  • One natural example of a discharging capacitor is
    lightning.
  • Somehow the charges are removed from the ones
    in the updraft of the cloud.
  • So, the bottom of the cloud has charge.
  • This induces a charge on the ground.
  • Now they do a dance. The charges step down
    randomly. The charges step up randomly.
  • If they meet it forms a pathway for a large
    amount of charge to flow very quickly a
    lightning strike!

17
Energy
  • Lightning of course contains a LOT of energy.
  • So, clearly capacitors dont just keep charge,
    but energy as well.
  • How much energy?
  • For a plate capacitor the energy it stores is
    simply
  • U ½ Q V or ½ Q E d or ½ C V2
  • Note this is half of what we had for individual
    charges be careful not to mix up the equations
    for particles and capacitors.

18
Sample
  • You hook up a small capacitor to an 8 volt
    battery.
  • If the charge on the plates are 5 C then how much
    energy does the capacitor contain?

19
Sample
  • You hook up a small capacitor to an 8 volt
    battery.
  • If the charge on the plates are 5 C then how much
    energy does the capacitor contain?
  • U ½ Q V (Done on Board)

20
conclusion
  • We learn that capacitors act as dams for charge
    allowing them to store charge.
  • Store too much though, and they flood.
  • The maximum charge storable is Q VC
  • Dielectrics can increase this by increasing the
    capacitance.
  • We learn the equations for capacitance and the E
    field inside a capacitor.
  • The energy a capacitor holds is U ½ Q V
Write a Comment
User Comments (0)
About PowerShow.com