Title: ITE1v4
1ITE1v4
JEOPARDY
- Computer Assembly
- Module 3
2Router Modes
WAN Encapsulation
WAN Services
Router Basics
Router Modes
WAN Encapsulation
WAN Services
Router Basics
Acronyms
Power Supplies
DATA Cables
Booting Up
Installation
? ? ? F i n a l J e o p a r d y ? ? ?
100
100
100
100
100
100
100
200
200
200
200
200
200
200
300
300
300
300
300
300
300
400
400
400
400
400
400
400
500
500
500
500
500
500
500
3Acronyms100
HDD
A What is Hard Disk Drive ?
4Acronyms200
FDD
A What is Floppy Disk Drive ?
5Acronyms300
POST
A What is Power On Self Test ?
6Acronyms400
BIOS
A What is Basic Input Output System ?
7Acronyms500
CMOS
A What is Complementary Metal-Oxide
Semiconductor?
8Power Supplies100
Number of pins used by the SATA Power Connector.
A What is 15?
9Power Supplies200
This connector connects to the FDD.
A What is 4-pin Berg?
10Power Supplies300
Type of connector to connect to an Optical Drive.Â
A What is Molex?
11Power Supplies400
Some ATX Power Supplies have this optional
connector that connects to the motherboard.
A What is 4-pin or 6-pin AUX?
12Power Supplies500
Type of Power Connector to connect to an ATX
motherboard.
A What is 20 or 24 Pin P1 Connector ?
13Data Cables100
Number of pins on Floppy Ribbon Cable.
A What is 34 ?
14Data Cables 200
Number of Pins on PATA cable.
A What is 40 ?
15Data Cables300
Number of Pins in SATA data cable.
A What is 7 ?
16Data Cables400
End of FDD Data Cable that connects to Floppy
Disk Drive A
A What is end with the twist?
17Data Cables500
Identifies Pin 1 on data cables.
A What is the red stripe (sometimes other
color)? ?
18Booting Up 100
The BIOS performs this check during initial
bootup.
A What is POST?
19Booting Up 200
A single beep denotes this.
A What is system is functioning properly?
CCNA1 v3 Module 1
20Booting Up 300
Where to find definition for beep codes.
A What is Motherboard Manufacturer documentation
or website?
CCNA1 v3 Module 1
21Booting Up 400
Most common key used to access BIOS settings.
A What is DEL (delete) key?
22Booting Up500
The configuration data for the computer is saved
here.
A What is CMOS? ?
23Installation 100
Use this between heatsink and CPU for even heat
distribution.
A What is a Thermal Compound? ?
24Installation 200
Install CPU into the ZIF socket by aligning ____
on CPU to ____ on ZIF socket.
A What is an Pin 1 and Pin 1?
25Installation 300
Installing memory in a computer, the memory must
be aligned by
A What is aligning the notch on the memory with
the notch on the memory slot?
26Installation 400
Use these when installing motherboard to make
sure the motherboard does not touch the bottom of
the case. Â
A What is standoffs? ?
27Installation 500
If two drives are connected to a PATA cable and
they are not using CS (cable select), they must
be configured as.
A What is Master and Slave ?
28Final Jeopardy
5 Common BIOS Setup Menu Options.
A What is MAIN, ADVANCED, SECURITY, OTHERS,
BOOT?