Chapter Four - PowerPoint PPT Presentation

About This Presentation
Title:

Chapter Four

Description:

Chapter Four Networking Media Chapter Objectives Explain concepts related to data transmission and noise Describe the physical characteristics of coaxial cable, STP ... – PowerPoint PPT presentation

Number of Views:114
Avg rating:3.0/5.0
Slides: 34
Provided by: PAUL2381
Category:

less

Transcript and Presenter's Notes

Title: Chapter Four


1
Chapter Four
  • Networking
  • Media

2
Chapter Objectives
  • Explain concepts related to data transmission and
    noise
  • Describe the physical characteristics of coaxial
    cable, STP, UTP, and fiber-optic media
  • Explain the benefits and limitations of different
    networking media

3
Chapter Objectives
  • Identify the best practices for cabling buildings
    and work areas
  • Describe the methods of transmitting data through
    the atmosphere
  • Identify the network media best suited to
    specific LAN environments

4
Data Transmission
  • Information can be transmitted via one of two
    methods
  • Analog
  • Digital
  • Amplitude
  • A measure of a signals strength

5
Analog Signal
  • Uses variable voltage to create continuous waves,
    resulting in an inexact transmission

FIGURE 4-1 Example of an analog signal
6
Digital Signal
  • Digital pulses can have a value of 1 or 0

FIGURE 4-2 Example of a digital signal
7
Data Transmission
  • Binary system encodes using 1s and 0s
  • Bits can only have a value of either 1 or 0
  • Eight bits together form a byte

8
Data Transmission
  • Frequency
  • Number of times a signals amplitude changes over
    a period of time
  • Expressed in Hertz (Hz)
  • Noise
  • Interference from sources near network cabling

9
Data Transmission
  • Attenuate
  • Loss of signal strength as transmission travels
    away from source

FIGURE 4-3 Analog signal distorted by noise and
then amplified
10
Data Transmission
  • Regeneration
  • Process of retransmitting a digital signal
  • Repeater
  • Device used to regenerate a signal

Figure 4-4 Digital signal distorted by noise and
then repeated
11
Data Transmission
  • Modem
  • Name reflects function as modulator/demodulator
  • Modulates analog signals into digital sounds at
    the transmitting end for transmission over
    telephone lines
  • Demodulates digital signals into analog signals
    at the receiving end

12
Media Characteristics
  • Throughput and bandwidth
  • Cost
  • Size and scalability
  • Connectors
  • Noise immunity

13
Throughput and Bandwidth
  • Throughput is the amount of data the medium can
    transmit during a given period of time
  • Also called capacity
  • Bandwidth measures the difference between the
    highest and lowest frequencies a media can
    transmit
  • Range of frequencies is directly related to
    throughput

14
Throughput and Bandwidth
FIGURE 4-5 A comparison of two digital frequencies
15
Cost
  • Cost of installation
  • Cost of new infrastructure versus reusing
    existing infrastructure
  • Cost of maintenance and support
  • Cost of a lower transmission rate affecting
    productivity
  • Cost of obsolescence

16
Size and Scalability
  • Specifications determining size and scalability
  • Maximum nodes per segment (dependent on
    attenuation)
  • Maximum segment length
  • Maximum network length
  • Latency is the delay between the transmission of
    a signal and its receipt

17
Connectors and Noise Immunity
  • Connector
  • Connects wire to network device
  • Noise Immunity
  • Electromagnetic Interference (EMI)
  • Radio Frequency Interference (RFI)
  • Conduits can protect cabling

18
Network Cabling
  • Baseband and Broadband Transmission
  • In baseband transmission, digital signals are
    sent through direct current (DC) pulses applied
    to the wire
  • In broadband transmission, signals are modulated
    as radio frequency (RF) analog pulses that use
    different frequency ranges

19
Network Cabling
  • Coaxial Cable
  • Central copper core surrounded by an insulator
  • Braiding insulates coaxial cable
  • Sheath is the outer cover of a cable
  • Foundation for Ethernet network in the 1980s

FIGURE 4-6 Coaxial cable
20
Network Cabling
TABLE 4-1 Types of coaxial cable
21
Network Cabling
  • Thicknet (10Base5)
  • Thicknet
  • Also called thickwire Ethernet
  • Rigid coaxial cable used for original Ethernet
    networks
  • IEEE designates Thicknet as 10Base5 Ethernet

22
Network Cabling
  • Thicknet (10Base5)
  • Throughput
  • Cost
  • Connector
  • Noise immunity
  • Size and scalability

FIGURE 4-7 Thicknet cable transceiver with detail
of a vampire tap piercing the core
23
Network Cabling
  • Thinnet (10Base2)
  • Also known as thin Ethernet, was most popular
    medium for Ethernet LANs in the 1980s
  • Throughput
  • Cost
  • Size and scalability
  • Connector
  • Noise Immunity

FIGURE 4-8 Thinnet BNC connectors
24
Network Cabling
  • Signal Bounce
  • Caused by improper termination
  • Travels endlessly between two ends of network
  • Prevents new signals from getting through

FIGURE 4-9 Typical coaxial network using a bus
topology
25
Network Cabling
  • Twisted-Pair (TP) Cable
  • Similar to telephone wiring
  • Consists of color-coded pairs of insulated copper
    wires twisted around each other and encased in
    plastic coating
  • Twists help reduce effects of crosstalk,
    interference caused by signals traveling on
    nearby wire pairs infringing on another pairs
    signals
  • Alien Crosstalk occurs when signals from adjacent
    cables interfere with another cables transmission

26
Network Cabling
  • Twist Ratio
  • Number of twists per meter or foot in a
    twisted-pair cable

FIGURE 4-10 Twisted-pair cable
27
Network Cabling
  • Shielded Twisted-Pair (STP)
  • Twisted wire pairs are individually insulated and
    surrounded by shielding

FIGURE 4-11 STP cable
28
Network Cabling
  • Unshielded Twisted-Pair
  • Consists of one or more insulated wire pairs
    encased in a plastic sheath
  • Does not contain additional shielding

FIGURE 4-12 UTP cable
29
Network Cabling
  • To manage network cabling, its necessary to be
    familiar with standards used on modern networks,
    particularly Category 3 (CAT3) and Category 5
    (CAT5)

Figure 4-13 CAT5 UTP cable
30
Network Cabling
  • STP and UTP
  • Throughput
  • Cost
  • Connector
  • Noise immunity
  • Size and scalability

FIGURE 4-14 RJ-45 connector, used by both STP and
UTP
31
Network Cabling
  • Fiber-Optic Cable
  • Contains one or several glass fibers at its core
  • Cladding is the glass shield around the core

FIGURE 4-15 Fiber-optic cable
32
Network Cabling
  • Single-Mode Fiber
  • Carries single frequency of light to transmit
    data
  • Multimode Fiber
  • Carries many frequencies of light over a single
    or many fibers

FIGURE 4-16 Single-mode and multimode fiber-optic
cables
33
Network Cabling
  • Fiber-Optic Cable
  • Throughput
  • Cost
  • Connector
  • Noise immunity
  • Size and scalability

FIGURE 4-17 SMA fiber connector
Write a Comment
User Comments (0)
About PowerShow.com