Title: PHOTOELECTRIC EFFECT
1PHOTOELECTRIC EFFECT
2Photoelectric History
- In 1839, Alexandre Edmond Becquerel discovered
the photovoltaic effect while studying the effect
of light on electrolytic cells. - Though not equivalent to the photoelectric
effect, his work on photovoltaics was
instrumental in showing a strong relationship
between light and electronic properties of
materials.
3Photoelectric History
- The actual photoelectric effect was first
observed by Heinrich Hertz in 1887, the
phenomenon is also known as the "Hertz effect."
4Photoelectric History
- Study of the photoelectric effect led to
important steps in understanding the quantum
nature of light and electrons and influenced the
formation of the concept of wave-pariticle
duality.
5Photoelectric History
- In 1905, Albert Einstein formulated the
wave-particle duality by describing light as
composed of discrete quanta, now called photons,
rather than continuous waves.
6Photoelectric History
- Based upon Max Planks theory of black-body
radiation, Einstein theorized that the energy in
each quantum of light was equal to the frequency
multiplied by a constant, later called Planks
Constant.
7Photoelectric History
- The photons of a light beam have a characteristic
energy determined by the frequency of the light.
8Photoelectric History
- A photon above a threshold frequency has the
required energy to eject a single electron,
creating the observed effect.
9Photoelectric History
- This discovery led to the quantum revolution in
physics and earned Einstein the Nobel Prize in
Physics in 1921.
10Photoelectric Basics
- IIn the photoelectric effect, electrons are
emitted from matter (metals and non-metallic
solids, liquids or gases). - TThe electrons are emitted because they absorb
energy from electromagnetic waves of a very short
wavelength, such as visible or ultraviolet light.
11Photoelectric Basics
- In the photoemission process, if an electron with
some material absorbs the energy of one photon
and thus has more energy than the work function
(the electron binding energy) of the material, it
(the electron) is ejected.
12Photoelectric Basics
- If the photon energy is too low, the electron is
unable to escape the material.
13Photoelectric Basics
- Increasing the intensity of the light beam
increases the number of electrons excited, but
does not increase the energy that each electron
possesses.
One photon with a high enough frequency in, one
electron out.
14Photoelectric Basics
- Increasing the intensity of the light beam
increases the number of electrons excited, but
does not increase the energy that each electron
possesses.
Three photons with a high enough frequency in,
three electrons out.
15Photoelectric Basics
- Increasing the intensity of the light beam
increases the number of electrons excited, but
does not increase the energy that each electron
possesses.
Lots of photons with a high enough frequency in,
lots of electrons out.
16Photoelectric Basics
- The energy of the emitted electrons does not
depend on the intensity of the incoming light,
but only on the energy or frequency of the
individual photons.
17Photoelectric Basics
- Electrons can absorb energy from photons when
irradiated, but they usually follow an all or
nothing principle.
18Photoelectric Basics
- All of the energy from one photon must be
absorbed and used to liberate one electron from
atomic binding, or else the energy is re-emitted
instead of the electron.
19Photoelectric Uses and Effects
- Video camera tubes in the early days of
television used the photoelectric effect.
20Photoelectric Effect and sound production at the
movies
21Photoelectric Uses and Effects
- The photoelectric effect will cause spacecraft
exposed to sunlight to develop a positive charge.
22Photoelectric Uses and Effects
- This can be a major problem, as other parts of
the spacecraft in shadow develop a negative
charge from nearby plasma,
23Photoelectric Uses and Effects
- and the imbalance can discharge through
delicate electrical components.
24 25Photoelectric Uses and Effects
- Light from the sun hitting lunar dust causes it
to become charged through the photoelectric
effect.
26Photoelectric Uses and Effects
- The charged dust then repels itself and lifts off
the surface of the Moon by electrostatic
levitation. This looks almost like an
atmosphere of dust.
27Photoelectric Uses and Effects
- Photons hitting a thin film of alkali metal or
semiconductor material such as gallium arsenide
can produce an image even in low light level
conditions
28Photoelectric Uses and Effects
- Still, the most common use is panels that produce
an electrical current. From solar calculators
29Photoelectric Uses and Effects
- Still, the most common use is panels that produce
an electrical current. From solar calculators to
solar house panels
30Photoelectric Uses and Effects
- Still, the most common use is panels that produce
an electrical current. From solar calculators to
solar house panels to electric cars
31Photoelectric Uses and Effects
- Still, the most common use is panels that produce
an electrical current. From solar calculators to
solar house panels to electric cars to satellites
and spacecraft, the uses for photoelectically
produced power keeps expanding.
32Atomic Fingerprints
- Every atom has a unique signature due to a
combination of number of electrons and energy
levels for that atom.
33 34What does quantized mean?
35Terms to know
- Spectroscopy- method of identifying elements and
chemicals. - Emission- given off
- Absorption- absorbing
- Photon- packet of energy (light is one example)
- Energy Level Where electrons are found spinning
around the nucleus of atoms.
36How Atoms give off light
- The emission spectrum of a chemical element or
chemical compound is the spectrum of frequencies
of electromagnetic radiation emitted by the
element's atoms or the compound's molecules when
they are returned to a lower energy state. - Each element's emission spectrum is unique.
Therefore, spectroscopy can be used to identify
the elements in matter of unknown composition.
Similarly, the emission spectra of molecules can
be used in chemical analysis of substances.
37- When atoms receive energy, electrons can move up
into higher energy levels, they dont stay there
long and when they fall to lower energy levels,
they give off energy in the form of light. How
far they fall determines what energy
(frequency) of light they give off.
38(No Transcript)
39B
C
A
40 41(No Transcript)
42- Quantum Processes
- Quantum properties dominate the fields of atomic
and molecular physics. Radiation is quantized
such that for a given frequency of radiation,
there can be only one value of quantum energy for
the photons of that radiation. The energy levels
of atoms and molecules can have only certain
quantized values. Transitions between these
quantized states occur by the photon processes
absorption and emission.
43 44- It is possible for excited electrons in atoms and
molecules to have some other kind of interaction
which lowers their energy before they can make a
downward transition. In that case they would emit
a photon of lower energy and longer wavelength.
This process is called fluorescence if it happens
essentially instantaneously.
45 46- Atoms in a gaseous state will produce Line
Spectra. Gas atoms are far apart and minimally
interact with each other. If all the gas atoms
are the same they will produce the same spectra. - Solids and liquids will produce a Continuous
Spectra because the atoms are so closely packed
that there is lots of atomic interaction. Almost
any photon energy is possible
47(No Transcript)
48 49 50(No Transcript)
51Notice the pattern between emission spectrum and
absorption spectrum.
52 53 54(No Transcript)
55 56Absorption Spectrum
- A material's absorption spectrum is the
fraction of incident radiation absorbed by the
material over a range of frequencies. The
absorption spectrum is primarily determined by
the atomic and molecular composition of the
material. Radiation is more likely to be absorbed
at frequencies that match the energy difference
between two quantum mechanical states of the
molecules. The absorption that occurs due to a
transition between two states is referred to as
an absorption line and a spectrum is typically
composed of many lines.
57Absorption Spectrum
- The frequencies where absorption lines occur, as
well as their relative intensities, primarily
depend on the electronic and molecular structure
of the molecule. The frequencies will also depend
on the interactions between molecules in the
sample, the crystal structure in solids, and on
several environmental factors (temperature,
pressure, electromagnetic field). The lines will
also have a width and shape that are primarily
determined by the spectral density or the density
of states of the system.
58(No Transcript)
59(No Transcript)
60 61Radiation
Day 2 Nuclear Radiation
62Particle Charge Mass Location
Electron -1 0 Electron cloud
Proton 1 1 Nucleus
Neutron 0 1 Nucleus
63Nuclear Notation
Mass Number (A) Nucleons (protons neutrons)
238
U
Atomic Number (Z) Just protons
92
- Z Atomic number or the number of protons
- A Mass number or the number of protons plus
neutrons
64Radioactivity
Antoine-Henri Becquerel (1852 - 1908)
- Discovered accidentally in 1896, radioactivity
occurs when unstable nuclei emit a particle or
energy. - In all nuclear reactions, charge and mass number
is conserved. Some mass is converted into
energy. - Three types of radiation
- Alpha (a)
- Beta (b)
- Gamma (g)
65Alpha Radiation
- Radiation is the same as a helium nucleus
- or ?. Remember the helium nucleus consists
of two protons two neutrons - Alpha radiation is the least energetic type of
radiation and can be stopped or shielded by a
sheet of paper.
66Beta ? Radiation
- 234 Th 234Pa 0e
- 90 91 ?1
- beta particle
- Beta (b) radiation also consists of a particle
which can be an electron or positron. - Transforms either a neutron into a proton or a
proton into a neutron in the nucleus - Shielded by heavy clothing or wood
-
67Gamma ? Radiation
- Pure energy photon and not a particle
- Very energetic form of light like an X-ray or
gamma ray but comes from the nucleus - Requires thick concrete or lead to shield or
stop - No change in atomic massor mass number
68Radiation Summary
Symbol Charge Penetration Power
a 2 Low, paper stops it
b 1- Medium, clothes stop it
g None High, only thick metal slows it
69(No Transcript)
70(No Transcript)
71(No Transcript)
72Geiger Counter
73Half-Life
Half-Life (t1/2) is the time required for half of
the atoms of a radioisotope to emit radiation and
to decay to products.
74Examples of Half-Life
- Isotope Half life
- C-15 2.4 sec
- Ra-224 3.6 days
- Ra-223 12 days
- I-125 60 days
- C-14 5700 years
- U-235 710 000 000 years
75Half-Life of a Radioisotope
- The half-life of cesium-137 is 30 years. If you
start with a 8mg sample, how much is left after
30 years? -
after 60 years? -
after 90 years? - decay curve
-
- 8 mg 4 mg 2 mg 1 mg
4 mg
2 mg
1 mg
initial
1 half-life
2
3
76(No Transcript)
77What is up with Emc2?
- This famous equation from Einstein represents the
equivalency of mass and energy. - E resting energy
- M mass
- C the speed of light (3x108m/s in a vacuum)
78Emc2
- Einstein saw that mass was a means of energy
storage. - Mass is a super storage device for energy.
- Small mass differences have huge energies because
c is such a big number.
79Do all protons have the same mass?
- Absolutley NOT.
- The mass of a proton depends on which atomic
nuclei its in. - Hydrogen atoms have very massive protons.
- Iron atoms have very low mass protons
- Uranium atoms have fairly high proton masses.
80Binding Energy
- The mass difference is related to the binding
energy of the nucleus. - Iron has low mass per nucleon but the highest
binding energy (hardest to pull apart) - Hydrogen has a high mass per nucleon but a small
binding energy.
81 82 834 Fundamental Forces
84Nucleons
- This is the term that refers to particles of the
nucleus. - Protons and Neutrons
85What holds the nucleus of an atom together? Why
dont the like charges of the protons repel and
break up the nucleus?
The electrical repulsive forces are trying to
separate each proton from every other proton.
BUT those forces are overpowered by the strongest
force in the Universe. The Strong Nuclear Force
holds all nucleons together. The Strong Nuclear
Force is the strongest but it acts over distances
not much longer than protons themselves. For
large nuclei, Strong forces dont act from one
side of the nucleus to the other. Repulsive
forces DO act across the nucleus. This causes
instability in the nucleus, and sometimes the
nucleus will decay.
86Nuclear Fission
- When a larger nucleus breaks into smaller nuclei.
The nucleons lose mass because they are in
smaller atomic nuclei. The difference in mass
equals the energy released. - Large amounts of energy are released and fission
is the idea behind nuclear power generation and
massive bombs.
87Nuclear Fission
- Fission occurs when a large nucleus absorbs a
neutron, becomes highly unstable, and breaks up
into two smaller nuclei. -
Energy
88 89 90Nuclear Power plants
- The idea is to take fissionable materials
(Uranium 235 and Plutonium) and generate heat to
boil water. The steam produced turns a turbine
like most other power plants.
91(No Transcript)
92(No Transcript)
93 94(No Transcript)
95Problems
- Thermal pollution Disposal of radioactive
fission fragments.Radioactive interaction with
structural components.Accidental release of
radioactivity into atmosphere.Leakage of
radioactive waste. Life time of 30 yrs due to
build up of radioactivity.Earthquakes. Limited
supply of fissionable materials - Breeder Reactor Some neutrons produced are
absorbed by 238U.239Pu is produced, and is
fissionable.So the supply of fuel can increase
100 times.However, Plutonium is highly toxic and
can readily be used in bombs, and it involves a
graphite moderator, as was used in Chernobyl.
96Radiation Dangers
One of the many, many problems that came up from
the explosion was the release of massive amounts
of radioactive Cesium-137.
If a forest fire were to occur, the ash cloud
from the fire could prove to be very dangerous to
any life the cloud passes over.
- In April, 1986, one of four nuclear reactors near
Chernobyl in the Ukraine exploded.
Cesium-137 has a half-life of 30 years and is
easily absorbed by trees and other plants as a
salt.
97Radiation Dangers
More recently, the Fukushima nuclear power plant
in Japan has caused a wide-spread evacuation
because of the release of numerous radioactive
isotopes.
Among the isotopes released are Cesium-137,
Iodine-131, and Plutonium. All of these elements
are dangerous in high enough quantities.
Because of these radioactive isotopes being
released, up to a 30 km evacuation has been
called for, fishing is affected, and tap water
usage is restricted.
98Nuclear Fusion
- This nuclear reaction occurs when smaller atoms
smash into one another and fuse together. This
process makes the nucleons lose mass. The
difference in mass is equal to energy released by
Emc2. Much more energy is released in this
process than by Fission.
99Why would 2 positive protons (Hydrogens) stick
together? Wouldnt they repel because of being
like charges?
- They do want to repel, thats why Fusion doesnt
work at normal temperatures. - Extremely high temperatures are required, these
great speeds (15million Kelvin) enable them to
get close enough for the stronger Strong Nuclear
Force to overpower the weaker electrical
replusion and cause them to fuse. - When two hydrogens fuse into a helium atom a lot
of mass is lost and converted to energy.
100Nuclear Fusion
- Fusion happens when two or more small nuclei
collide to form a larger nuclei - 2H 3H 4He 1n
- 1 1
2 0 - Occurs in the sun and other stars
- A clean and powerful source of energy
101(No Transcript)
102(No Transcript)
103Fusion
- Fusion is much cleaner with very little harmful
by-products. - The fuel is easy to come by.
- The energy released is greater than fission per
unit mass. - Many technical hurdles will have to be overcome
before we use this practically. One main issue
is containment. Containers melt when subjected
to Fusion temperatures.
104Manhattan Project
- Purpose Develop Nuclear weapons
- First bomb Trinity- exploded over American soil
(near Alamogordo, NM) in a test on July 16, 1945.
It was a Plutonium bomb (very complicated and
needed a test, a similar bomb was dropped over
Nagasaki Japan)
105Little Boy
- First nuclear weapon used in War.
- It was a Uranium Bomb. Much simpler to build,
but Uranium 235 was very hard to come by. - It was dropped over Hiroshima, Japan on August 6,
1945. - It was untested when dropped.
- It exploded with the energy equivalence of 18,000
tons of dynamite. - Over 100,000 Japanese were killed by this bomb.
106Little Boy
Death from radiation exposure can take anywhere
from days to years. The actual causes range from
immediate organ collapse to cancers decades after
the exposure.
The release of massive amounts of alpha, beta,
and gamma radiation by both fission and fusion
bombs can cause horrific burns to the human body.
While the moral, ethical, and political aspects
of nuclear weapons can be argued, their
devastating power and destructive capabilities
cannot.
107(No Transcript)
108Fat Man
Dropped on Nagasaki, Japan August 9, 1945 It had
the energy release of 21,000 tons of
dynamite. The death toll was less than Hiroshima
due to bad weather and the bombing run flying
slightly off course. It was a Plutonium Bomb and
much more complicated than the Uranium bomb.
109(No Transcript)
110Thermonuclear Device
- Fusion Devices
- Stars are under tremendous gravity
- Creates tremendous pressure
- High pressure means high temperature
- High temperature means particles collide
violently - On earth high temperatures and densities not
easily achieved - Fission Bomb can ignite Fusion Bomb Thermonuclear
Device or H bomb
111(No Transcript)
112 113(No Transcript)
114 115 116 117 118