Intelligent Speed Adaptation in vehicles - PowerPoint PPT Presentation

About This Presentation
Title:

Intelligent Speed Adaptation in vehicles

Description:

M.Tech-Automotive Electronics Contents ... To reduce the system cost and enhance the system performance to provide dynamic update of information. Block Diagram GPS ... – PowerPoint PPT presentation

Number of Views:1670
Avg rating:3.0/5.0
Slides: 19
Provided by: TamilE
Category:

less

Transcript and Presenter's Notes

Title: Intelligent Speed Adaptation in vehicles


1
Intelligent Speed Adaptation in vehicles
Review - 0
  • Date 01/08/09
  • Tamil Eniyan. M
  • 08MEA026
  • M.Tech-Automotive Electronics

2
Contents
  • Introduction
  • Existing speed adaptation techniques
  • Need
  • System Overview
  • Block diagram
  • Steps
  • Time plan
  • Software tools
  • Hardware modules
  • Conclusion

3
Introduction
  • The Intelligent Speed Adaptation is done in
    vehicle using GPS technology by tracking the
    location of the vehicle
  • This system does not require a preloaded map or
    route for its operation
  • This system is a low cost and effective system
    which requires less memory and simple algorithm.

4
Existing speed adaptation techniques
  • RF id based systems
  • This system uses RF id tags on the sign boards,
    the receiver module in the vehicle receives the
    signal at various speed zones through these RF
    tags.
  • This systems can be employed only for slow
    vehicles. Practically it cannot be employed in
    the highway for vehicles with high speed like
    100kmph
  • Optical recognition systems
  • This is done by camera based detection, the
    camera records continuously, when a sign boar is
    approached, the sign is recognized by image
    processing techniques.
  • This system uses complex algorithm
  • Uses much resources
  • Some critical cases when the sign board is
    covered by tree branches, the system does not
    detect the sign board.

5
Existing speed adaptation techniques
  • GPS based systems
  • The GPS receiver module tracks its position and
    using the pre loaded map and speed zone database,
    the speed adaptation is done
  • Requires a large memory to store the complete map
    and speed zone databases.
  • Emergency sign boards like MEN AT WORK, TAKE
    DIVERSION etc. are not fed to the receiver
    dynamically.
  • Dead reckoning
  • Using sensors, it can plot the path taken by the
    vehicle. By overlaying this path onto a digital
    map, the DR system knows approximately where the
    vehicle is, what the local speed limit etc.
  • This system is much complicated with multiple
    sensors and possibility of deviation from actual
    data is high

6
Need for a new system
  • To over come the limitations of the other Speed
    adaptation systems.
  • To reduce the memory requirement of conventional
    GPS speed adaptation techniques.
  • To reduce the system cost and enhance the system
    performance to provide dynamic update of
    information.

7
Block Diagram
lat12.970649 lon79.159310
Speed controller
4
3
GPS Receiver
Controller
My position?
2
Memory
RF Receiver
1
RF Tx
Display Alert
TOLLGATE
8
Step 1 Transmitter sends a data to the
vehicle. The data is a table of information of
latitude and longitude and its corresponding road
sign, speed limit..
9

Step 2 GPS receiver requests its position data to
satellite.
10

Step 3 GPS receiver receives its position data
from satellite.
lat12.970649 long79.159310
11
lat12.970649 long79.159310
000176.1100412.19256
?
A sample data from received data.
Current Position From GPS
YES
Step 4 The current position is compared with the
data of table received. When the current position
reaches the position of data, corresponding alert
is done.
Check for the corresponding sign speed limit
Alert the driver / Limit speed
12
(No Transcript)
13
Time plan
August Literature survey
September Selection of components/ Study about components selected (microcontroller, GPS, Speed control)
October Selection of components/ Study about components selected (microcontroller, GPS, Speed control)
November Basic hardware design
December Full Hardware Implementation (Speed Zone Detection Alert)
January Programming
February Stage II development (speed control implementation)
March Project Completion
April Report Preparation
14
Software Tools
  • Microcontroller Programming tools
  • Keil IDE
  • MPLAB IDE
  • Flashing tool

15
Hardware modules
  • GPS Receiver
  • Microcontrollers
  • Wireless Transmitter / Receiver
  • Computer Interface
  • Display unit
  • Speed Control Module

16
Reference
  • N. Agerholm,R, Waagepetersen,N. Tradisauskas,and
    H. Lahrmann 2008 - IEEE Intelligent Vehicles
    Symposium Intelligent Speed Adaptation in
    Company Vehicles
  • Riaz Sayed, Pierre Delaigue, Jeremy Blum, Ali
    Mortazavi and
  • Azim Eskandarian 2007-01-1321 SAE TECHNICAL
    PAPER SERIES
  • Development of an Intelligent Multimode Speed
    Adaptation System
  • European Road Safety Observatory
  • Intelligent Speed Adaptation (ISA)
    http//www.erso.eu/knowledge/content/04_esave/
  • University of Leeds and MIRA Ltd.
  • Intelligent Speed Adaptation Literature Review
    and scoping study- January 2006
    http//www.tfl.gov.uk/assets/

17
Thank you
18
(No Transcript)
Write a Comment
User Comments (0)
About PowerShow.com