Introduction Where it all began

1
IntroductionWhere it all began
2
Chinese Wood Plate
3
Sheep Skin in place of paper
4
Mulberry Tree Paper Making
5
Discovery of new glue
6
Separation of Skin from the branch
7
Origami Zoo
8
Kangaroo, Gorilla, Camel and Reindeer
9
The Sea world
Goldfish
Ray and Carp
10
The World of Birds
Java Sparrow
Swan flamingo and standing crane
11
Birds
Raven
12
Beautiful Flowers
White Flower
Hydrangea and a snail
13
HOW TO MAKE AN ORIGAMI CRANE

• Fold in Half diagonally. Hold in Half diagonally
  again, creating
• 2 triangles.
• 2. Hold again in Half, following the marked
  line in picture 2, only
• not diagonally, but rather separating the
  perfect square in half.
• Repeat step 2 to create 4 perfect folded squares.
• Facing the color, from the 4 perfect squares
  follow the folded
• inwards bents, bring them together

14
5. The other 2 sticking out sides smoothly bring
together to one point 6. Bring the whole
construction to the shape of one square 7. Flip
the unconnected side up from both sides 8. Bent
the outside edges inwards from both sides to
create the ice-cream shape (dont exactly follow
and look at the picture 8 its extra)
15
15. Skip 13-14 to bring yourselves to the picture
15, where you open the just bent sides of
the squares back to their original share.
you should have once again a perfect square
shape, only now with the bent sides. 16.
Here come the tricky part open up the outside
side of the square so you will have an open
pocket. Follow the lines that you have just
created in 12, but now bent the sides INSIDE and
fold the open half of the square. Do the
same on the other side and bring everything to
the same point. The shape should look once again
like an ice cream cone. When you are done, you
need to open up the front and the back, leaving
the top untouched creating a shape of a diamond
shape. The head Of the cone should remain under
the wings that you just bended up.
16
17. IMPORTANT! With your diamond shape, find one
of the sides and bent inwards the sides that are
away from the head along the middle crack,
previously created, untouched. 18. Repeat for
all four sides. 19. Holding all four sides, hold
them OUT. 20. Bring the sides that are away from
the head- towards the head by bending them
upwards.
17
2123. Unfold the sides of the crane as shown on
the picture above from the middle 24. Make the
head and the tail by bending the ends!!! YOU
HAVE DONE IT!!!!!
18
THE END