How To Deal With Pool Pump Problems? - PowerPoint PPT Presentation

About This Presentation
Title:

How To Deal With Pool Pump Problems?

Description:

Pool pumps are very important factor and hence it needs to be clean and maintain time to time. – PowerPoint PPT presentation

Number of Views:10

less

Transcript and Presenter's Notes

Title: How To Deal With Pool Pump Problems?


1
How To Deal With Pool Pump Problems?
http//goaquatix.com/
2
Introduction
  • The swimming pool pump is the most important
    element when it comes to run the pool operations
    effectively. Hence, it is very important to fix
    pool pump problems time to time to ensure the
    smooth functioning of your aquatic facility.

3
  • Pool pump is the heart of any swimming pool, but
    if not maintain properly, the pool pump can stop
    functioning. This can lead in shutting down the
    pool function. This is not a profitable deal for
    commercial swimming pool owners.

4
  • Due to advanced aquatic technology, it becomes
    easier for professionals to rectify the problem.
    So, it is important to hire such professionals
    who have skills and who can use such advanced
    technology.

5
  • Here are the most common pool pump problems and
    the ways to fix them
  • If your pool pump makes a noise, first you need
    to check if there are any loose screws in the
    base of the pump. If you find any, tighten them
    immediately. If you find a gap between the base
    and the pump itself fill the gap with rubber mat
    to stop the vibration.

6
  • Due to mud or dirt accumulated in pool pump, your
    pump stops to fetch the water. So you need to
    clean the baskets to remove off all the mud. Then
    check pump impeller. It is connected to the motor
    which is responsible for the flow of water.
    Because of the dirt, impellers usually get jammed
    over time. Therefore, open the pump and clear
    away all debris.

7
  • Due to a loose connection, the pump doesnt work.
    Apart from this, lack of electricity, voltage
    fluctuations, and a blown fuse are also the main
    reasons to stop the functioning of the pump. If
    all these elements are working just fine, then
    your pool company staff may consider other
    possibilities.

8
  • If your pump doesnt pull water, the first thing
    you need to check is to see if anything is stuck
    in the pump and skimmer basket. When too much mud
    or dirt gets accumulated, the pump will stop
    pulling water. You just need to clean the baskets
    to remove mud.

9
Contact Us
http//goaquatix.com/
Write a Comment
User Comments (0)
About PowerShow.com