Things to Focus on While Handling Compressed Gas

1
Things to Focus on While Handling Compressed
Gas Compressed gases are stored in heavy-walled
metal cylinders that are specially designed to
contain them. While the cylinders can come in
different sizes and shapes, they have to meet CSA
standards for transportation as well as
manufacturing so that it is safer for the user to
utilize them without worry.
This standard covers such requirements for the
sake of inspection, testing, manufacturing,
marking, requalification, reheat treatment,
rebuilding, and repair of cylinders. But is this
enough to ensure that the compressed gas
cylinders are handled carefully? Until the
cylinder reaches its destined destination, it is
the responsibility of the manufacturer and
transporter to assure its safety. However, as
soon as it reaches the intended recipient, one
has to follow certain precautionary steps to
maintain safety.
2

• In case you don't know what they are, we are here
  to tell you what they are. You have to start
  with equipment maintenance.
• The "How-to" Of Equipment Maintenance
• Conducting regular equipment is crucial as it
  helps you spot situations where compressed gases
  are handled and stored. What your aim should be
  to ensure that this equipment is operating
  normally. So you should start with,
• Examining regulatory, cylinder connections, and pr
  essure relief valves.
• Checking out the cylinder to notice whether it is
  free of corrosion, leakage, puttings, gouges, or
  dents.
• With the regular check-out of the equipment, you
  can prevent any hazardous accident from taking
  place. That is why you have to follow the
  instructions written below to create awareness.
• Tell the employees about possible hazards of
  materials that one may encounter. Share with the
  precautionary steps as well.
• Carry out the equipment properly so that the
  devices application does not affect the Medical
  Gas cylinder.
• You have to teach them the importance of avoiding
  forcible
• connections. In other words, using homemade
  adaptors, tampering with the cylinder is a
  strict no-no.
• Spread the word that they are required to comply
  with the applicable regulations. However, if
  anything bad happens, they are to contact the
  gas suppliers for their expertise.
• So "What" Are The Basic Safe Practices That One
  Should Adopt While Handling The Compressed Gas
  Cylinders?

3

• While handling Medical Grade Oxygen cylinders,
  the person in question must adopt general safe
  practices to protect the surrounding from any
  dangers.
• Start with reading the MSDSs and the labels of
  all the materials that are available in the lab.
• Knowledge is the key, so knowing the hazards of
  materials you are dealing with will help you
  prevent them.
• Check the label of the compressed gas you are
  dealing with.
• You have to store the compressed gas cylinders in
  a place where it is cool, well-ventilated, and
  dry. Moreover, they have to be away from the
  incompatible materials and sources that could
  cause ignition. Further, the temperature of the
  area should not exceed more than 52C.
• Ending note
• Apart from the precautions regarding the storing
  methods, one also needs to spread awareness
  regarding the handling procedure. For example,
  rolling, dragging, or dropping the cylinder
  should never be done. The valve protection
  should not be fastened until usage. All these
  methods will prevent you from any arising
  complications.
• To Know More Visit www.noblegassolutions.com