Difference Between Impact Driver and Drill

1
Difference Between Impact Driver and Drill
2
Different tasks require the use of an impact
driver and a hammer drill. A Makita drills are
used instead of an impact driver to remove
screws and bolts when drilling through hard
surfaces. But both are effective instruments.
While a hammer drill uses a hammer-like
movement, the impact driver Makita uses more
torque. An impact driver may resemble a hammer
drill however, the hammering action allows it to
produce more force. For brickwork, an impact
driver is ineffective.
3
The mechanism for a hammer drill

• Hammer drills possess direct forward force, just
  like hammers do. It can hammer using a cam or an
  electro-pneumatic system. Some rotary hammers
  use an energy-transfer method called
  electro-pneumatic hammering, in which air
  pressure is used. On the axis of rotation, the
  complete chuck and bits move backward and forth
  in a cam-action drill.

4
Impact Driver Mechanism
An impact driver applies perpendicular pressure
to screw or unscrew screws. Without using any
longitudinal force, it generates torque to
advance the screw. Compared to standard
screwdrivers, this is entirely different. Impact
drivers may be constrained by this, though.
5
Design Difference
A hammer drill and an impact driver both use
rotation to function. The tools produce
different impacts and torques due to their
design. Hammer drills have continually sustained
torque. Once you select the hammer mode, the
mechanism will change automatically. No
rotational power will exist, though. The maximum
sustained torque of an impact driver is small.
Once more, the hammer moves away by depressing
the coils motion when it reaches its top speed.
The force needed to deliver a strong strike will
be present when this occurs. The impact driver
can now produce over 4000 impacts in a minute.
Note that only 1/4-inch hexagonal shanks can be
used with an impact driver.
6
Mechanism
Despite having a mechanism comparable to a hammer
drill, an impact driver has more rotational
energy. An impact driver has a powerful spring
that, when compressed, delivers a great deal of
force. In this case, the driver applies the same
force. This makes it perfect for hammering in
bolts and screws. For individualized operation,
some models have variable speeds. A hammer drill
produces rotating power, a team effort between
the drill and the hammer. Its impact motion
makes it ideal for drilling holes in brick and
concrete. It can drill a great distance with
variety. Again, you must be certain to turn off
the hammer mode while using it for such tasks.
7
Noise Level
Impact drills generate sound that is around 12 dB
louder than standard drills. High noise levels
produced by the impact driver have the potential
to damage hearing. Because of this, its crucial
to adhere to safety precautions and choose
appropriate ear protection.
8
Drilling Speed
Drilling Speed for 1/4" Ledger Screws At low and
no load rates, an impact driver is quicker than
a hammer drill. While an impact driver can reach
3000 RPM, a hammer drill has a range of 2000 RPM.
Though the hammer drill might be quicker, it can
be useful for activities with high loads. 1/2"
Twist Bit Drilling Speed By 1.2 seconds, an
impact driver can drill holes more quickly than a
hammer drill. Drilling Speed 1" Spade Bit This
tool is useful for removing a lot of
material. The impact driver takes 4 seconds
longer to complete the task than the hammer
drill. Drilling Speed 1/4" Concrete Bit Using
an impact driver or a hammering drill, you can
drill a 1/4-inch concrete bit at the same speed.
9
Conclusion
The type of job will determine which tool you
should usea hammer drill or an impact driver
Makita. Saving time and effort is possible when
you have the correct tool. After reading the
article above, you now understand how a hammer
drill and impact driver work and how to use
them. Confirm that you are using the proper tool
for the job.
10
Contact Us

• 44 (0)28 873 12213
• info_at_epgmachinery.com www.epgmachinery.com
• 63 Clonmore Road Dungannon Co tyrone BT71 6NB