A1260032453aksvR

1
RENEW BIOCARE RBS
RESORBABLE BIOMATERIAL BLASTED SURFACE
TM
OSEOTITE 3i SLA ITI STRAUMANN
RBS RENEW BIOCARE
Surface Roughness Measurements
Surface Preparation
Roughness (?m.) Control 1.32
0.20 Glass Bead 0.73 0.25 Acid Etch 1.17
0.27 100 mesh Al2O3 2.14 0.48 RBS 3.09
0.48
TM
2
Renew Biocare RBS Process
RBS surface 2000x

• The Renew Biocare RBS Process bigins with a
  traditional machined implant fixture.
• The implant is then basted with calcium phosphate
  ceramic.
• After blasting, the implant is passivated (in
  accordancd with established standards,
• (ASTM F-86) to completely remove residiual
  media.
• This passivation is not an acid-etch procedure
  and does not affect fatique strenght
• of the implant by attacking the titanium.
• RBS media has the added benefit of a
  biocompatible material that is easily removed
• from the surface during the passivation
  process.

3
COMPARING OTHER SURFACES TO RENEW BIOCARE RBS
MACHINED
ACID ETCHED (3i)
AL2 O3 BLASTED (SLA)
Renew Biocare RBS (ß-TCP)