CleanADiamond MiniSquares

1
Clean-A-Diamond Mini-Squares

• Hold handpiece with used/clogged Two Striper
  diamond just above Clean-A-Diamond Mini-Square

Clean-A-Diamond, Two Striper and Mini-Squares
are trademarks of Abrasive Technology, Inc.
2
Clean-A-Diamond Mini-Squares

• Make a plunge cut, down sideways with handpiece
  and water spray on (never tip first) to unclog
  the diamond bur.
• Only the diamond abrasive section should come in
  contact with the Clean-A-Diamond Mini-Square.
  Avoid contact between the stone and instrument
  neck.

Clean-A-Diamond, Two Striper and Mini-Squares
are trademarks of Abrasive Technology, Inc.
3
Clean-A-Diamond Mini-Squares

• Lift rotating diamond from the surface of the
  stone.
• Remove diamond from chuck and follow normal
  cleaning/sterilization protocol.
• Clean-A-Diamond Mini-Square can be autoclaved
  after use.

Clean-A-Diamond, Two Striper and Mini-Squares
are trademarks of Abrasive Technology, Inc.
4
Clean-A-Diamond Mini-Squares

• You will increase the cutting speed, efficiency
  and life of your Two Striper diamond by
  immediate, post-preparation cleaning, with the
  Clean-A-Diamond Mini-Squares provided in your
  cassettes!

Clean-A-Diamond, Two Striper and Mini-Squares
are trademarks of Abrasive Technology, Inc.