Title: Exploring the Periodic Table
1Exploring the Periodic Table
- Modern Chemistry Holt, Rinehart, Winston
2Chapter 5 Section 1history of the periodic
table
- In the late 1800s, scientists had identified over
60 elements. Certain characteristic physical and
chemical properties were associated with each
element. The physical property called atomic mass
provided chemists with a convenient way to
organize the elements. At the same time, it was
recognized that there were certain elements that
had similar chemical properties. Mendeleev
arranged the elements in rows according to atomic
weight and kept elements with similar chemical
properties in the same columns. Today elements
are ordered according to atomic number rather
than atomic mass.
3 Learning Targets
- I can explain the roles of Mendeleev and Moseley
in the development of the periodic table. - I can describe the modern periodic table.
- I can explain how the periodic law can be used to
predict the physical and chemical properties of
elements. - I can describe how the elements belonging to a
group of the periodic. table are interrelated in
terms of atomic number.
4Stanislao Cannizzaro (1826-1910)
- Italian chemist
- Determined a method for accurately measuring the
relative masses of atoms - His method allowed chemists to search for a
relationship between atomic mass and other
properties of elements
5Dmitri Mendeleev (1834-1907)
- Russian chemist
- Credited as being the creator of the first
version of the periodic table of elements - Arranged his periodic table according to atomic
mass so that elements with similar properties
were in the same group - Some elements could not be arranged according to
atomic mass in order to keep the elements
arranged according to properties - Predicted the properties of elements that had not
yet been discovered using his periodic table
6Mendeleevs Periodic Table
- I began to look about and write down the
elements with their atomic weights and typical
properties, analogous elements and like atomic
weights on separate cards, and this soon
convinced me that the properties of elements are
in periodic dependence upon their atomic
weights. --Mendeleev, Principles of Chemistry,
1905, Vol. II
7Henry Moseley (1887-1915)
- English chemist
- Worked with Rutherford
- Proved Mendeleevs arrangement of the periodic
table to be correct only, the periodic table
was arranged according to atomic number, not
atomic mass
8The Periodic Law
- States that when elements are arranged in order
of increasing atomic number, their physical and
chemical properties show a periodic pattern
9Chapter 5 Section 2electron configuration and
the periodic table
- The modern periodic table has 112 squares, which
represent a unique element. The distinctive shape
of the periodic table comes in part from the
periodic law. Elements in the same column have
similar properties. These columns are referred to
as groups or families of elements. The horizontal
rows of the periodic table are called periods.
The elements in the periodic table are also
grouped as metals, nonmetals, and semimetals.
Metals make up most of the periodic table and are
located in the center and at the left of the
table. With the exception of hydrogen, nonmetals
are on the right side, and semimetals are located
between the metals and nonmetals. The periodic
table can also be viewed in terms of orbital
blocks. These orbital blocks refer to the
orbitals (s, p, d, and f ) which contain the
elements incompleted sublevels of electrons.
10 Learning Targets
- I can describe the relationship between electrons
in sublevels and the length of each period of the
periodic table - I can locate and name the four blocks of the
periodic table and explain the reasons for these
names - I can discuss the relationship between group
configurations and group numbers - I can describe the locations in the periodic
table and the general properties of the alkali
metals, the alkaline-earth metals, the halogens,
the transition metals, the noble gases, the
actinides, the lanthanides, the metals, the
nonmetals, the metalloids, and the main group
elements
11 Periodic Law Demonstrated in Groups
- Why do elements in groups have similar physical
and chemical properties?
- They have the same number of valence electrons in
their outer energy levels. - Generally, the configurations of the outermost
electron shells of elements within the same group
are the same.
12In the periodic table below, indicate the
location of the groups, periods, alkali metals,
alkaline earth metals, halogens, noble gases,
lanthanides, actinides, transition metals, inner
transition metals, main group elements, metals,
nonmetals and metalloids.
METALS METALLOIDS NONMETALS
13In the periodic table below, indicate the
location of the groups, periods, alkali metals,
alkaline earth metals, halogens, noble gases,
lanthanides, actinides, transition metals, inner
transition metals, main group elements, metals,
nonmetals and metalloids.
ALKALI METALS
14In the periodic table below, indicate the
location of the groups, periods, alkali metals,
alkaline earth metals, halogens, noble gases,
lanthanides, actinides, transition metals, inner
transition metals, main group elements, metals,
nonmetals and metalloids.
ALKALINE-EARTH METALS
15In the periodic table below, indicate the
location of the groups, periods, alkali metals,
alkaline earth metals, halogens, noble gases,
lanthanides, actinides, transition metals, inner
transition metals, main group elements, metals,
nonmetals and metalloids.
HALOGENS
16In the periodic table below, indicate the
location of the groups, periods, alkali metals,
alkaline earth metals, halogens, noble gases,
lanthanides, actinides, transition metals, inner
transition metals, main group elements, metals,
nonmetals and metalloids.
NOBLE GASES
17In the periodic table below, indicate the
location of the groups, periods, alkali metals,
alkaline earth metals, halogens, noble gases,
lanthanides, actinides, transition metals, inner
transition metals, main group elements, metals,
nonmetals and metalloids.
TRANSITION METALS
18In the periodic table below, indicate the
location of the groups, periods, alkali metals,
alkaline earth metals, halogens, noble gases,
lanthanides, actinides, transition metals, inner
transition metals, main group elements, metals,
nonmetals and metalloids.
INNER TRANSITION (Rare Earth) METALS
19In the periodic table below, indicate the
location of the groups, periods, alkali metals,
alkaline earth metals, halogens, noble gases,
lanthanides, actinides, transition metals, inner
transition metals, main group elements, metals,
nonmetals and metalloids.
LANTHANIDES
20In the periodic table below, indicate the
location of the groups, periods, alkali metals,
alkaline earth metals, halogens, noble gases,
lanthanides, actinides, transition metals, inner
transition metals, main group elements, metals,
nonmetals and metalloids.
ACTINIDES
21In the periodic table below, indicate the
location of the groups, periods, alkali metals,
alkaline earth metals, halogens, noble gases,
lanthanides, actinides, transition metals, inner
transition metals, main group elements, metals,
nonmetals and metalloids.
PERIODS
22In the periodic table below, indicate the
location of the groups, periods, alkali metals,
alkaline earth metals, halogens, noble gases,
lanthanides, actinides, transition metals, inner
transition metals, main group elements, metals,
nonmetals and metalloids.
GROUPS
23In the periodic table below, indicate the
location of the groups, periods, alkali metals,
alkaline earth metals, halogens, noble gases,
lanthanides, actinides, transition metals, inner
transition metals, main group elements, metals,
nonmetals and metalloids.
MAIN GROUP ELEMENTS
24Lets Compare!
- Good conductors of heat and electricity
- Malleable
- Ductile
- Luster
- Typically solids at room temperature
- Solids, liquids and gases at room temperature
- Solids are brittle and dull
- Poor conductors of heat and electricity
- Have properties of both metals and nonmetals
- Mostly brittle solids
- Intermediate conductors of electricity- AKA
semiconductors
25Properties of Alkali Metals
- Extremely reactive
- Readily react with water and air
- Silvery in appearance
- Soft enough to cut with a knife
- Lower densities than other metals
- Lower melting points than other metals
26Properties of Alkaline-Earth Metals
- Harder stronger than alkali metals
- Higher densities melting points than alkali
metals - Less reactive than alkali metals
27Properties of Halogens
- Most reactive nonmetals
- React readily with most metals to form salts
- Most electronegative elements
28Properties of Noble Gases
- Least reactive elements because their highest
occupied energy levels are completely filled with
an octet of electrons (except He, which only
requires 2 electrons to be filled).
29Properties of Transition Metals
- High densities
- High melting points
- Good conductors of heat electricity
- High luster
- Less reactive than alkali and alkaline-earth
metals
30Properties of p Block Metals
- Harder and more dense than the s block metals
- Softer and less dense than the d block metals.
31Properties of Lanthanides
- Soft, silvery metals
- Similar reactivity to alkaline-earth metals
32Properties of Actinides
- All radioactive
- The first 4 have been found naturally on Earth
33Did you know?
- Oxygen, carbon, hydrogen and nitrogen make up 96
of the human body mass - Calcium and phosphorous make up 3
- Sodium, potassium, chloride and magnesium make up
0.7 - Iron, cobalt, copper, zinc, selenium, cyanide and
fluorine are found in trace amounts
34Chapter 5 Section 3electron configurations and
periodic properties
- Many of the properties of the elements change in
predictable ways as you move across a period or
move down a group of the periodic table. The
predictable changes in these properties are
called periodic trends. There are periodic trends
for properties such as atomic radius, ionic size,
ionization energy, electron affinity, and
electronegativity. Knowledge of these trends
helps develop a better understanding of the
periodic table and of the patterns of behavior of
the elements.
35 Learning Targets
- I can define the term periodic trend.
- I can define atomic radius, ionic radius,
ionization energy, electron affinity and
electronegativity. - I can describe the general trends on the periodic
table for atomic radius, ionic radius, electron
affinity, ionization energy and
electronegativity. - I can apply the trends on the periodic table to
answer questions regarding size, electron
affinity, ionization energy and electronegativity.
36Atomic Radii
- Atomic radius one-half the distance between the
nuclei of identical atoms that are bonded together
Atomic Radius
Distance between nuclei
37Period Trends
- Decreases across a period
38Why?
- Protons are added to the nucleus moving across a
period from left to right - This increases the charge of the nucleus
(effective nuclear charge Zeff) - As Zeff increases, the electrons are pulled
closer to the nucleus
39Period Trends
40Group Trends
41Why?
- The addition of shells increases the electrons
distance from the nucleus and the size of the atom
- Electron-electron repulsion plumps up the atom
- Zeff decreases the further the electrons are from
the nucleus
42Variations in Atomic Radii
43Atomic Radii Trends
DECREASES
DECREASES
44Ionization Energy
- The energy required to remove one electron from a
neutral atom of an element creating an ion - A Energy ? A e-
45Period Trends
- Increase across a period
- Why?
- Zeff increases across the period
46Group Trends
- Decrease down the group
- Why?
- Electron shielding causes a decrease in effective
nuclear charge - Electron-electron repulsion forces increase
47Variations in Ionization Energies
Draw the orbital notation for Group 5A and Group
6A.
Can you explain the dips in the chart for these 2
groups?
48Variations in Ionization Energies
If removing an electron will create an empty or ½
filled subshell, ionization energy will decrease.
49Successive Ionization Energies
- Each successive electron removed from an ion
feels an increasingly stronger effective nuclear
charge (Zeff) therefore, successive ionization
energies are larger than 1st ionization energies - A large jump in ionization energy occurs when
removing an electron from an ion that assumes a
noble gas configuration
50Ionization Energy Trends
INCREASES
INCREASES
51Electron Affinity
- The change in energy that a neutral atom
undergoes when an electron is acquired (the
ability to attract an e -) - A e- ? A- energy
- negative energy value (exothermic)
- A e- energy ? A-
- positive energy value (endothermic)
52Period Trends
- Increase across a period
- Why?
- Zeff increases across the period
53Group Trends
- Decrease down the group
- Why?
- Electron shielding causes a decrease in effective
nuclear charge - Electron-electron repulsion forces increase
54Variations in Electron Affinities
Why is there such a large decrease in energy for
groups 2A and 5A?
55Electron Affinity Trends
INCREASES
INCREASES
56Ionic Radii
- Cation positively charged ion
- Cations are smaller than their parent atom
why? - Anion negatively charged ion
- Anions are bigger than their parent atom why?
Removal of an electron creates an unbalanced
positive charge increasing Zeff and decreasing
the radius of the ion.
Addition of an electron creates an unbalanced
negative charge decreasing Zeff and increasing
the radius of the ion.
57Ionic Radii Trends
DECREASES
DECREASES
58Valence Electrons
- Electrons available to be gained, lost or shared
in the formation of a chemical compound - Located in the outer energy level
59Electronegativity
- A measure of the ability of an atom in a chemical
compound to attract a bonding pair of electrons - NOTE Electronegativity is a property of atoms
in compounds and thus differs from ionization
energy and electron affinity, which are
properties of isolated atoms
60Trends
- Increase across a period
- Effective nuclear charge increases
- Decrease down a group
- Increase in atomic size and increase in electron
shielding decreases the effective nuclear charge - Electronegativity depends upon
- The number of protons in the nucleus
- The distance from the nucleus
- Electron shielding
61Electronegativity Trends
INCREASES
INCREASES