Power Supplies for Military-Grade Systems

1
Abbott Technologies Presents
Power Supplies for Military-Grade Systems
2
Power Supplies for Military-Grade Systems
1. POL Converters
2. Paralleled Modules
3. Standardized Power Supplies
4. Faster Production Speeds
5. Subsystem Power Supply
6. Electromagnetic Compatibility
7. Electrical Isolation
8. Hermeticity
3
POL Converters

• POL or Point of Load converters maximize power.
• The POL converters allow a system to use much
  less power and use power at a much more efficient
  level.
• These converters also allow the systems to use
  more power than they were previously
  able to use.

4
Paralleled Modules

• Another way to maximize power efficiency is to
  use a system that runs on a parallel
  module.
• These paralleled modules can generally work
  best with a high-powered system.
• They can generally handle up to a 50 A current.

5
Standardized Power Supplies

• Standardized power supplies have been lowering
  the costs of these military-grade power
  systems.
• Since the power supplies are all required to
  contain and maintain consistency, they tend
  to cost less.
• The company spends less on engineering and
  production costs, and the customer can
  receive the product.

6
Faster Production Speeds

• Since companies are spending less time on the
  engineering and designing phases, they
  can ship the power supplies faster.
• The sooner the military or the company receives
  the power supply.
• The easiest way to do this is through a
  standardized power system.

7
Subsystem Power Supply

• Military personnel use subsystem power supplies
  to ensure, their systems are getting a clear
  and steady supply of power.
• They must meet military standards of 1275 and
  704 (MIL-STD-1275 / MIL-STD-704).
• These systems must also continue to provide
  power to the gear and equipment during
  surges.

8
Electromagnetic Compatibility

• One of the regulations, MIL-STD-1275 also
  regulates electromagnetic compatibility.
• These standards ensure the system can handle
  electromagnetic spikes in all modes of
  operation including starting, normal
  and generator modes.
• They must be able to continue to generate energy
  and push energy throughout the system.

9
Electrical Isolation

• To ensure that all systems run without
  interference, the power systems must have
  electrical isolation.
• To ensure electrical isolation, the system must
  move the energy across isolation
  boundary.
• Electrical isolation is used primarily in
  military-grade power systems.

10
Hermeticity

• When it comes to aviation, hermeticity is one of
  the most important factors in a military
  power system.
• They must be hermetically sealed, when a customer
  seeks out a military-grade system.
• It cannot function properly if it is constantly
  affected by outside sources and conditions.

11
Contact Us
Abbott Technologies
8203 Vineland Ave. Sun Valley, CA 91352 Sales
[phone] Tech. Support [phone]
Fax [phone]
For more information visit http//abbott-tech.co
m/
12
Thank You