Lecture 13 VHDL Structural Modeling - PowerPoint PPT Presentation

1 / 26
About This Presentation
Title:

Lecture 13 VHDL Structural Modeling

Description:

The statement part of an architecture body of a structural VHDL description ... If above appears inside an architecture body, it is a concurrent signal assignment ... – PowerPoint PPT presentation

Number of Views:142
Avg rating:3.0/5.0
Slides: 27
Provided by: eecsNort
Category:

less

Transcript and Presenter's Notes

Title: Lecture 13 VHDL Structural Modeling


1
Lecture 13 VHDL Structural Modeling
  • Hai Zhou
  • ECE 303
  • Advanced Digital Design
  • Spring 2002

2
Outline
  • Structural VHDL
  • Use of hierarchy
  • Component instantiation statements
  • Concurrent statements
  • Test Benches
  • READING Dewey 12.1, 12.2, 12.3, 12.4, 13.1,
    13.2, 13.3. 13.4, 13.6, 13.7. 13.8

3
A general VHDL design
Entity is End entity
I1
O1
I2
IO1
s1
component
concurrent assignment
I1
O1
s2
architecture of is ... begin end
s3
s4
s8
s9
s6
process 1
process 2
concurrent assignment
I2
IO1
s5
s7
4
Structural Descriptions
  • A structural description of a system is expressed
    in terms of subsystems interconnected by signals
  • Each subsystem may be another design (component)
    or a process
  • Component instantiation and port maps
  • entity entity_name (architecture_identifier)
  • port map (
  • port_name gt signal_name
  • expression
  • open,
  • )

5
Example of Component Instantiation
  • entity DRAM_controller is
  • port (rd, wr, mem in bit
  • ras, cas, we, ready out bit)
  • end entity DRAM_controller
  • We can then perform a component instantiation as
    follows assuming that there is a corresponding
    architecture called fpld for the entity.
  • main_mem_cont entity work.DRAM_controller(fpld)
  • port map(rdgtcpu_rd, wrgtcpu_wr,
  • memgtcpu_mem, readygt cpu_rdy,
  • rasgtmem_ras, casgtmem_cas, wegtmem_we)

6
Example of a four-bit register
  • Let us look at a 4-bit register built out of 4 D
    latches

reg4
d0 d1 d2 d2 en clk
q0 q2 q3 q4
7
Behavioral Description of Register
Architecture behavior of reg4 is begin
storage process is variable stored_d0,
stored_d1, stored_d2, stored_d3 bit
begin if en 1 and clk 1 then stored_d0
d0 -- variable assignment stored_d1
d1 stored_d2 d2 stored_d3
d3 endif q0 lt stored_d0 after 5 nsec q1 lt
stored_d1 after 5 nsec q2 lt stored_d2 after 5
nsec q3 lt stored_d3 after 5 nsec wait on d0,
d1, d2, d3 end process storage end
architecture behavior
8
Structural Composition of Register
d_latch
d
q
d0
q0
clk
d_latch
d
d1
q
q1
clk
d_latch
d
d2
q
q2
clk
d_latch
d3
d
q
and2
q3
a
en
clk
y
clk
b
int_clk
9
Structural VHDL Description of Register
entity d_latch is port(d, clk in bit q out
bit) end d_latch architecture basic of d_latch
is begin latch_behavior process is
begin if clk 1 then q lt
d after 2 ns end if wait on
clk, d end process latch_behavior end
architecture basic
entity and2 is port (a, b in bit y out
bit) end and2 architecture basic of and2
is begin and2_behavior process is begin
y lt a and b after 2 ns wait on a,
b end process and2_behavior end architecture
basic
10
Structural VHDL Description of Register
entity reg4 is port(d0, d1, d2, d3, en, clk
in bit q0, q1, q2, q3 out bit) end
entity reg4 architecture struct of reg4 is
signal int_clk bit begin bit0 entity
work.d_latch(basic) port map(d0,
int_clk, q0) bit1 entity
work.d_latch(basic) port map(d1,
int_clk, q1) bit2 entity
work.d_latch(basic) port map(d2,
int_clk, q2) bit0 entity work.d_latch(basic)
port map(d3, int_clk, q3) gate
entity work.and2(basic) port map(en, clk,
int_clk) end architecture struct
11
Mixed Structural and Behavioral Models
  • Models need not be purely structural or
    behavioral
  • Often it is useful to specify a model with some
    parts composed of interconnected component
    instances and other parts using processes
  • Use signals as a way to join component instances
    and processes
  • A signal can be associated with a port of a
    component instance and can be assigned to or read
    in a process

12
Example of Mixed Modeling Multiplier
architecture mixed of multiplier is signal
partial_product, full_product integer signal
arith_control, result_en, mult_bit, mult_load
bit begin -- mixed arith_unit entity
work.shift_adder(behavior) port map(
addend gt multiplicand, augend gt full_product,
sum gt partial_product, add_control gt
arith_control) result entity
work,reg(behavior) port map (d gt
partial_product, q gt full_product, en
gt result_en, reset gt reset) multiplier_sr
entity work.shift_reg(behavior) port map
(d gt multiplier, q gt mult_bit, load gt
mult_load, clk gt clk) product lt
full_product control_section process is begin
-- sequential statements to assign values to
control signals end process control_section end
architecture mixed
Entity multiplier is port(clk, reset in
bit multiplicand, multiplier in
integer product out integer end
entity multiplier
Multiplier (register)
multiplicand
Arith_unit (shift adder)
clk
Result (shift register)
13
Component and Signal Declarations
  • The declarative part of the architecture
    STRUCTURE contains
  • component declaration
  • signal declaration
  • Example of component declaration
  • component AND2_OP
  • port (A, B in bit Z out bit)
  • end component
  • Components and design entities are associated by
    signals, e.g. A_IN, B_IN
  • Signals are needed to interconnect components
  • signal INT1, INT2, INT3 bit

14
Component Instantiation Statements
  • The statement part of an architecture body of a
    structural VHDL description contains component
    instantiation statements
  • FORMAT
  • label component_name port map (positional
    association of ports)
  • label component_name port map (named
    association of ports)
  • EXAMPLES
  • A1 AND2_OP port map (A_IN, B_IN, INT1)
  • A2 AND2_OP port map (AgtA_IN, CgtC_IN,ZgtINT2)

15
Hierarchical Structures
  • Can combine 2 MAJORITY functions (defined
    earlier) and AND gate to form another function
  • entity MAJORITY_2X3 is
  • port (A1, B1,C1,A2, B2, C2 in BIT Z_OUT out
    BIT)
  • end MAJORITY_2X3
  • architecture STRUCTURE of MAJORITY_2X3 is
  • component MAJORITY
  • port (A_IN, B_IN, C_IN in BIT Z_OUT out
    BIT)
  • end component
  • component AND2_OP
  • port (A, B in BIT Z out BIT)
  • end component
  • signal INT1, INT2 BIT
  • begin
  • M1 MAJORITY port map (A1, B1, C1, INT1)
  • M2 MAJORITY port map (A1, B2, C2, INT2)
  • A1 AND2_OP port map (INT1, INT2, Z_OUT)
  • end STRUCTURE

16
Concurrent Signal Assignments
  • entity XOR2_OP is
  • port (A, B in BIT Z out BIT)
  • end entity
  • -- body
  • architecture AND_OR of XOR2_OP is
  • begin
  • Z lt (not A and B) or (A and not B)
  • end AND_OR
  • The signal assignment Z lt .. Implies that the
    statement is executed whenever an associated
    signal changes value

17
Concurrent Signal Assignment
  • entity XOR2_OP is
  • port (A, B in BIT Z out BIT)
  • end entity
  • -- body
  • architecture AND_OR_CONCURRENT of XOR2_OP is
  • --signal declaration
  • signal INT1, INT2 BIT
  • begin -- different order, same effect
  • INT1 lt A and not B -- INT1 lt A and not
    B
  • INT2 lt not A and B -- Z lt INT1 or INT2
  • Z lt INT1 or INT2 -- INT2 lt not A and B
  • end AND_OR_CONCURRENT
  • Above, the first two statements will be executed
    when A or B changes, and third if Z changes
  • Order of statements in the text does not matter

18
Concurrent and Sequential Statements
  • VHDL provides both concurrent and sequential
    signal assignment statements
  • Example
  • SIG_A lt IN_A and IN_B
  • SIG_B lt IN_A nor IN_C
  • SIG_C lt not IN_D
  • The above sequence of statements can be
    concurrent or sequential depending on context
  • If above appears inside an architecture body, it
    is a concurrent signal assignment
  • If above appears inside a process statement, they
    will be executed sequentially

19
Data Flow Modeling of Combinational Logic
  • Consider a parity function of 8 inputs
  • entity EVEN_PARITY is
  • port (BVEC in BIT_VECTOR(7 downto 0)
  • PARITY out BIT)
  • end EVEN_PARITY
  • architecture DATA_FLOW of EVEN_PARITY is
  • begin
  • PARITY lt BVEC(0) xor BVEC(1) xor BVEC(2) xor
    BVEC(3) xor BVEC(4) xor BVEC(5) xor BVEC(6) xor
    BVEC(7)
  • end DATA_FLOW

20
Alternative Logic Implementations of PARITY
TREE CONFIGURATION
CASCADE CONFIGURATION
21
Tree Configuration
  • architecture TREE of EVEN_PARITY is
  • signal INT1, INT2, INT3, INT4, INT5, INT6 BIT
  • begin
  • INT1 lt BVEC(0) xor BVEC(1)
  • INT2 lt BVEC(2) xor BVEC(3)
  • INT3 lt BVEC(4) xor BVEC(5)
  • INT4 lt BVEC(6) xor BVEC(7)
  • --second row of tree
  • INT5 lt INT1 xor INT6
  • INT6 lt INT3 xor INT4
  • -third row of tree
  • PARITY lt INT5 xor INT6
  • end TREE

22
Cascaded Configuration
  • architecture CASCADE of EVEN_PARITY is
  • signal INT1, INT2, INT3, INT4, INT5, INT6 BIT
  • begin
  • INT1 lt BVEC(0) xor BVEC(1)
  • INT2 lt INT1 xor BVEC(2)
  • INT3 lt INT2 xor BVEC(3)
  • INT4 lt INT3 xor BVEC(4)
  • INT5 lt INT4 xor BVEC(5)
  • INT6 lt INT5 xor BVEC(6)
  • PARITY lt INT6 xor BVEC(7)
  • end CASCADE

23
Alternative Architecture Bodies
  • Three different VHDL descriptions of the even
    parity generator were shown
  • They have the same interface but three different
    implementation
  • Use the same entity description but different
    architecture bodies
  • architecture DATA_FLOW of EVEN_PARITY is
  • ...
  • architecture TREE of EVEN_PARITY is
  • ...
  • architecture CASCADE of EVEN_PARITY is
  • ...

24
Test Benches
  • One needs to test the VHDL model through
    simulation
  • We often test a VHDL model using an enclosing
    model called a test bench
  • A test bench consists of an architecture body
    containing an instance of the component to be
    tested
  • It also consists of processes that generate
    sequences of values on signals connected to the
    component instance

25
Example Test Bench
Entity test_bench is end entity
test_bench architecture test_reg4 of test_bench
is signal d0, d1, d2, d3, en, clk, q0, q1, q2,
q3 bit begin dut entity work.reg4(behav)
port map (d0, d1, d2, d3, d4, en, clk, q0, q1,
q2, q3) stimulus process is begin
d0 lt 1 d1 lt 1 d2 lt 1 d3 lt 1 en lt
0 clk lt 0 wait for 20 ns en lt
1 wait for 20 ns clk lt 1 wait for
20 ns d0 lt 0 d1 lt 0 d2 lt 0 d3
lt 0 wait for 20 ns en lt 0 wait for
20 ns . wait end process stimulus
end architecture test_reg4
26
Summary
  • Structural VHDL
  • Use of Hierarchy
  • Component instantiation statements
  • Concurrent statements
  • Test Benches
  • READING Dewey 17.1, 17.3, 17.4, 17.5, 17.6,
    17.7, 17.8, 17.10, 18.1, 18.2
Write a Comment
User Comments (0)
About PowerShow.com