INSITE

1
INSITE 7.4 OVERVIEW

• Electronic Service Tools

2
Whats New AGENDA

• Installation
• Operating System Support
• New Engine Supported
• New Features Supported
• New Advanced ECM Data
• New ECM Diagnostic Tests
• New Languages Supported

3
Installation

• INSITE 7.4 installation
• INSITE 7.4 is available for all active INSITE
  registered users in the form of a DVD
• INSITE v7.4 will update any current INSITE
  software version v7.2, v7.3, v7.3FP1 and v7.3FP2
• A new password will not be required if an active
  subscription to INSITE exists

Back to Whats New Agenda
4
Installation

• INLINE 4/5 drivers (5.6.3.1) installation
• The latest available INLINE 4/5 drivers will
  automatically be installed or upgraded with the
  installation of INSITE v7.4
• Administrative rights are needed for the USB
  driver association after the installation

Back to Whats New Agenda
5
Installation

• INSITE Fault Viewer
• INSITE Fault Viewer will be available for
  installation through INSITE DVD for all
  registered INSITE Pro Functionality users
• INSITE Fault Viewer is designed to provide the
  ability to monitor public faults on a J1939 or
  J1708 network
• The Fault Viewer will help to isolate the
  probable cause of a system failure or error
• Administrative rights are needed for installation

Back to Whats New Agenda
6
Operating System Support

• Windows 7, 32-bit and 64-bit are now supported
• Windows XP 64-bit and Vista 64-bit are now
  supported
• Windows 2000 is no longer supported

Back to Whats New Agenda
7
New Engine Support

• QSB 4.5/6.7 CM2250
• QSL 9 CM2250

Back to Whats New Agenda
8
New Features Supported

• Data Monitor/Logger Graphical Monitoring
• Graphical Monitoring is a way to display, log,
  print, and save data for up to six parameters in
  a graph
• Graphical Monitoring visually monitors and plots
  multiple parameters into a graphical display

Back to Whats New Agenda
9
Click on the icon or right-click to start the
graphing
10
Add or Remove parameters to be graphed
Select the sampling rate and click OK
11
The graph can be imported or saved
12
Message pops up when you attempt to close the
graph without saving
13
Select the format and click Save
14
(No Transcript)
15
New Features Supported

• Ability to add Functionality Password when
  opening INSITE for the first time
• INSITE now provides the capability to enter both
  the Basic and Functionality password the first
  time it is opened
• This applies to a new installation only
• After entering the Basic password, a window will
  open asking for the Functionality password to be
  entered

Back to Whats New Agenda
16
Follow the instructions and click OK
Enter the Basic Password and click OK
17
Follow the instructions to enter the
Functionality Password
Enter the Functionality Password and click OK
18
New Features Supported

• Export All Work Orders
• All Work Order images can be exported using the
  right-click menu and selecting the Export All
  Images option
• Highlight the Work Order image and right-click to
  export all images

Back to Whats New Agenda
19
Right-Click and select Export All Images
20
New Features Supported

• Single key off for multi-module downloads
• INSITE only requires a single key off at the end
  of a multi-module calibration download
• All ECM Codes to be downloaded can be selected
  before the calibration download begins

Back to Whats New Agenda
21
Make a selection and click Next to begin the
calibration download
22
Select the calibration and click Next
23
Select the Fleet Calibration Count or enter the
calibration authorization password if required
and click Next
24
Calibration Transfer Summary shows the
calibration download status
25
Click OK
26
New Features Supported

• Adjustable Parameters Recovery File
• If a calibration download fails when Save/Restore
  Adjustable Parameters is selected, INSITE will
  save these parameters to an Adjustable Parameter
  Recovery File
• The file can be used by INSITE to restore the
  Dataplate and adjustable parameters on this ECM
  if it is in a ROM Booted or Foot Printed state on
  the next successful download

Back to Whats New Agenda
27
Check the box to restore adjustable parameters
and click Next to continue the calibration
download
28
New Advanced ECM Data

• Engine Torque History
• Engine Torque History records the four most
  recent horsepower ratings applied to an engine,
  and displays the Maximum Power and Maximum Torque
  ratings available
• This applies only to ISB4.5/6.7 ISD4.5/6.7 CM2150
  SN (Euro 5) and ISL8.9 CM2150 SN (Euro 5)

Back to Whats New Agenda
29
Select the feature from the Advanced ECM Data
30
Follow the instructions
Click Refresh to refresh the data or click Save
31
(No Transcript)
32
New ECM Diagnostic Test

• Aftertreatment Diesel Exhaust Fluid System Leak
  Test
• This test is designed to command the dosing
  system to build and maintain prime regardless of
  the SCR Inlet Temperature
• This test can be used to verify that the system
  is free of leaks after reassembly or to validate
  the repair of a faulty component in the dosing
  system
• This only applies to ISC8.3 CM2250, ISL9 CM2250,
  ISB6.7 CM2250, ISF3.8 CM2220 AN, ISF2.8 CM2220
  AN, ISX 11.9/15 CM2250

Back to Whats New Agenda
33
Double Click the test or Select the ECM
Diagnostic Test and then click Next
34
Follow the instructions and click Start
35
New Languages Supported

• INSITE now supports
• Danish
• Dutch
• Norwegian
• Swedish

Back to Whats New Agenda